Merge tag 'v6.6.72' into for/openbmc/dev-6.6

This is the 6.6.72 stable release

iio: adc: ad7124: Disable all channels at probe time

commit 4be339af334c283a1a1af3cb28e7e448a0aa8a7c upstream.

When during a measurement two channels are enabled, two measurements are
done that are

iio: adc: ad7124: Disable all channels at probe time

commit 4be339af334c283a1a1af3cb28e7e448a0aa8a7c upstream.

When during a measurement two channels are enabled, two measurements are
done that are reported sequencially in the DATA register. As the code
triggered by reading one of the sysfs properties expects that only one
channel is enabled it only reads the first data set which might or might
not belong to the intended channel.

To prevent this situation disable all channels during probe. This fixes
a problem in practise because the reset default for channel 0 is
enabled. So all measurements before the first measurement on channel 0
(which disables channel 0 at the end) might report wrong values.

Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels")
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241104101905.845737-2-u.kleine-koenig@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.60' into for/openbmc/dev-6.6

This is the 6.6.60 stable release

iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()

commit efa353ae1b0541981bc96dbf2e586387d0392baa upstream.

In the ad7124_write_raw() function, parameter val can potentially
be zer

iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()

commit efa353ae1b0541981bc96dbf2e586387d0392baa upstream.

In the ad7124_write_raw() function, parameter val can potentially
be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST()
is called within ad7124_set_channel_odr(). The ad7124_write_raw()
function is invoked through the sequence: iio_write_channel_raw() ->
iio_write_channel_attribute() -> iio_channel_write(), with no checks
in place to ensure val is non-zero.

Cc: stable@vger.kernel.org
Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241022134330.574601-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.52' into for/openbmc/dev-6.6

This is the 6.6.52 stable release

iio: adc: ad7124: fix DT configuration parsing

[ Upstream commit 61cbfb5368dd50ed0d65ce21d305aa923581db2b ]

The cfg pointer is set before reading the channel number that the
configuration should po

iio: adc: ad7124: fix DT configuration parsing

[ Upstream commit 61cbfb5368dd50ed0d65ce21d305aa923581db2b ]

The cfg pointer is set before reading the channel number that the
configuration should point to. This causes configurations to be shifted
by one channel.
For example setting bipolar to the first channel defined in the DT will
cause bipolar mode to be active on the second defined channel.

Fix by moving the cfg pointer setting after reading the channel number.

Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240806085133.114547-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

iio: adc: ad7124: Switch from of specific to fwnode based property handling

[ Upstream commit a6eaf02b82744b424b9b2c74847282deb2c6f77b ]

Using the generic firmware data access functions from proper

iio: adc: ad7124: Switch from of specific to fwnode based property handling

[ Upstream commit a6eaf02b82744b424b9b2c74847282deb2c6f77b ]

Using the generic firmware data access functions from property.h
provides a number of advantages:
1) Works with different firmware types.
2) Doesn't provide a 'bad' example for new IIO drivers.
3) Lets us use the new _scoped() loops with automatic reference count
cleanup for fwnode_handle

Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368dd ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.51' into for/openbmc/dev-6.6

This is the 6.6.51 stable release

iio: adc: ad7124: fix chip ID mismatch

commit 96f9ab0d5933c1c00142dd052f259fce0bc3ced2 upstream.

The ad7124_soft_reset() function has the assumption that the chip will
assert the "power-on reset" b

iio: adc: ad7124: fix chip ID mismatch

commit 96f9ab0d5933c1c00142dd052f259fce0bc3ced2 upstream.

The ad7124_soft_reset() function has the assumption that the chip will
assert the "power-on reset" bit in the STATUS register after a software
reset without any delay. The POR bit =0 is used to check if the chip
initialization is done.

A chip ID mismatch probe error appears intermittently when the probe
continues too soon and the ID register does not contain the expected
value.

Fix by adding a 200us delay after the software reset command is issued.

Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-1-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

iio: adc: ad7124: fix config comparison

commit 2f6b92d0f69f04d9e2ea0db1228ab7f82f3173af upstream.

The ad7124_find_similar_live_cfg() computes the compare size by
substracting the address of the cfg

iio: adc: ad7124: fix config comparison

commit 2f6b92d0f69f04d9e2ea0db1228ab7f82f3173af upstream.

The ad7124_find_similar_live_cfg() computes the compare size by
substracting the address of the cfg struct from the address of the live
field. Because the live field is the first field in the struct, the
result is 0.

Also, the memcmp() call is made from the start of the cfg struct, which
includes the live and cfg_slot fields, which are not relevant for the
comparison.

Fix by grouping the relevant fields with struct_group() and use the
size of the group to compute the compare size; make the memcmp() call
from the address of the group.

Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-2-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver

Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.

Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:

- new IIO drivers and updates

- Interconnect driver updates

- fpga driver updates and additions

- fsi driver updates

- mei driver updates

- coresight driver updates

- nvmem driver updates

- counter driver updates

- lots of smaller misc and char driver updates and additions

All of these have been in linux-next for a long time with no reported
problems"

* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...

show more ...

Merge tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.6

New devic

Merge tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.6

New device support
* adi,ad8366
- Add support for the HMC792 digital attenuator (mostly chip specific data)
* alwinner,sun20i-gpadc
- New driver for the integrated ADC on a number of allwinner SoCs
including dt-binding documentation.
* microchip,mcp4728
- New driver for this quad channel DAC. Includes dt-bindings.
* miramems, da280
- Add ID for DA217 accelerometer which is compatible with the da280.
* murata,irs-d200
- New driver for this passive infrared sensor typically used for human
detection. Includes bindings and a few pieces of new ABI to
cover a case of needing to count a number of repeats of an event
before reporting it.
* rohm,bu27008
- Add initial support for the BU27010 RGB + flickering sensor to this
driver. Substantial refactoring was needed to enable this.

Features
* adi,admv8818
- Add mode that bypasses the input and output filters.
* amlogic,meson
- Support control of the MUX on channel 7, exposed as multiple channels.
- Support channel labels.
* sensirion,scd4x
- Add pressure compensation. Controlled via an 'output' pressure channel.
* ti,lmp92040
- Add IIO buffered supported (read via chrdev).
* vishay,vcnl4000
- Add proximity interrupt support for vcnl4200.
- Add proximity integration time control for vcnl4200.
- Add illuminance integration time control for vcnl4040 and vcnl4200.
- Add calibration bias, proximity and illuminance event period, and
oversampling ratio control for vcnl4040 and vncl4200.

Cleanup and minor fixes
* core
- Tidy up handling of set_trigger_state() callback return values
to consistently assume no positive return values.
- Use min() rather than min_t() in a case where types were clearly
the same.
- Drop some else statements that follow continue with a loop or
a returns.
- White space and comment format cleanup.
- Use sysfs_match_string() helper to improve readability.
- Use krealloc_array() to make it explicit a krealloc is for an array
of structures, not just one.
* tools
- Tidy up potential overflow in array index.
* tree wide
- Fix up includes for DT related headers.
- Drop some error prints in places where as similar error message
is printed by the function being called.
- Tidy up handling of return value from platform_get_irq() to no longer
take into account 0 as a value that might be returned. Similar for
fwnode_irq_get().
* adi,ad7192
- Add missing error check and improved debug logging.
- Use sysfs_emit_at() rather than open coded variant.
* adi,adis16475
- Drop unused scan element enum entries.
- Specify that a few more devices support burst32 mode.
* adi,admv1013
- Enable all required regulators and document as required in the
dt-binding.
* adi,admv1014
- Make all regulators required in the dt-binding as the device needs
them all enabled.
* adi,adxl313
- Fix wrong enum values being used in the i2c_device_id table.
- Use i2c_get_match_data() to reduce open coded handling of the
various id tables.
* allwinner,gpadc
- Make the kconfig text more specific to make space for separate drivers
for other Allwinner devices.
* amlogic,meson
- Drop unused timestamp channels as no buffer support.
- Various minor reorganizations to enable addition of support channel 7
MUX.
- Initialize some default values to account for potential previous user
since reboot.
* qcom,spmi-adc5
- Add ADC5_GPIO2_100K_PU support to driver to line up with bindings.
* qcom,spmi-adc7
- Use predefined channel ID definitions rather than values.
* invensense, common
- Factor out the timestamp handling to a module used by both mpu6050 and
icm42600.
* invensense,mpu6050
- Read as many FIFO elements as possible in one bus access.
* men,s188
- Drop redundant initialization of driver owner field.
* microchip,mcp4018 and mcp4531
- Use i2c_get_match_data() instead of open coding. Includes making the
data format the same for the i2c_device_id and firmware match
tables.
* semtech,sx9310
- dt-bindings: Add reference to IIO schema to provide the label property.
* semtech,sx9324
- dt-bindings: Add reference to IIO schema to provide the label property.
* st,stm32-adc
- Use devm_platform_get_and_ioremap_resource() instead of open coded
version.
* st,stm-lptimer-trigger
- Drop setting platform drvdata as it wasn't then used.
* ti,ads1015
- Fix wrong dt binding description of ti,datarate for some devices.
* vishay,vcnl4200
- Move to switch statements for channel type checking to make later
additions simpler.

* tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
Documentation: ABI: testing: admv8818: add bypass
drivers: iio: filter: admv8818: add bypass mode
iio: light: bd27008: Support BD27010 RGB
iio: light: bu27008: add chip info
dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor
iio: add MCP4728 I2C DAC driver
dt-bindings: iio: dac: add mcp4728.yaml
drivers: iio: admv1013: add vcc regulators
dt-bindings: iio: admv1013: add vcc regulators
iio: trigger: stm32-lptimer-trigger: remove unneeded platform_set_drvdata()
iio: adc: men_z188_adc: Remove redundant initialization owner in men_z188_driver
dt-bindings: iio: admv1014: make all regs required
iio: cdc: ad7150: relax return value check for IRQ get
iio: mb1232: relax return value check for IRQ get
iio: adc: fix the return value handle for platform_get_irq()
tools: iio: iio_generic_buffer: Fix some integer type and calculation
iio: potentiometer: mcp4531: Use i2c_get_match_data()
iio: potentiometer: mcp4018: Use i2c_get_match_data()
iio: core: Fix issues and style of the comments
iio: core: Switch to krealloc_array()
...

show more ...

iio: adc: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of tha

iio: adc: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230714174628.4057920-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless

Merge wireless into wireless-next

Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.

96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails

show more ...

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Merge drm/drm-fixes into drm-misc-fixes

Let's start the fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-intel-next

Sync up with v6.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

Referen

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type propert

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
cfi: Fix CFI failure with KASAN
perf python: Fix splitting CC into compiler and options
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
...

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'master' into mm-nonmm-stable

Merge branch 'master' into mm-stable