Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'i2c-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
"I2C has mainly cleanups this time and a few driver improvements.

Becau

Merge tag 'i2c-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
"I2C has mainly cleanups this time and a few driver improvements.

Because a lot of developers were on holidays (including myself) it was
a good timing to apply lots of cleanups which would normally cause
merge conflicts with other floating patches. Extra thanks go to Andi
Shyti who backed me up when I was on a four week hiatus. This is also
the reason that some patches were commited later than ideal"

* tag 'i2c-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (67 commits)
i2c: at91: Use dev_err_probe() instead of dev_err()
I2C: ali15x3: Do PCI error checks on own line
i2c: Make return value check more accurate and explicit for devm_pinctrl_get()
i2c: designware: Add support for recovery when GPIO need pinctrl
i2c: mlxcpld: Add support for extended transaction length
i2c: mlxcpld: Allow driver to run on ARM64 architecture
i2c: nforce2: Do PCI error check on own line
i2c: sis5595: Do PCI error checks on own line
i2c: qcom-cci: Fix error checking in cci_probe()
i2c: muxes: pca954x: Add regulator support
i2c: muxes: pca954x: Add MAX735x/MAX736x support
dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
dt-bindings: i2c: pca954x: Correct interrupt support
i2c: pnx: Use devm_platform_get_and_ioremap_resource()
i2c: pxa: Use devm_platform_get_and_ioremap_resource()
i2c: s3c2410: Use devm_platform_get_and_ioremap_resource()
i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()
i2c: st: Use devm_platform_get_and_ioremap_resource()
i2c: qcom-geni: Convert to devm_platform_ioremap_resource()
i2c: stm32f4: Use devm_platform_get_and_ioremap_resource()
...

show more ...

i2c: mlxcpld: Add support for extended transaction length

Add support for extended length of read and write transactions.
New FPGA logic allows to increase size of the read and write
transactions le

i2c: mlxcpld: Add support for extended transaction length

Add support for extended length of read and write transactions.
New FPGA logic allows to increase size of the read and write
transactions length. This feature is verified through capability
register 'CPBLTY_REG'. Two bits 5 and 6 of the register are used for
length capability detection. Value '10' indicates support of extended
transaction length - 128 bytes for read transactions and 132 for write
transactions.

Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

- I2C has now a co-maintainer taking care of the host drivers. Welcome

Merge tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

- I2C has now a co-maintainer taking care of the host drivers. Welcome
Andi Shyti and have fun!

- platform remove callback converted to return void in drivers

- simplify drivers by using devm_clk_get_enabled()

- introduce i2c_get_match_data() to avoid more boilerplate code
(especially since the core stopped delivering an i2c_device_id)

- and the usual bunch of driver updates

* tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
i2c: uniphier: Use devm_clk_get_enabled()
i2c: uniphier-f: Use devm_clk_get_enabled()
i2c: owl: Use devm_clk_get_enabled()
i2c: lpc2k: Use devm_clk_get_enabled()
i2c: hix5hd2: Use devm_clk_get_enabled()
i2c: sun6i-p2wi: Use devm_clk_get_enabled()
i2c: pasemi-platform: Use devm_clk_get_enabled()
i2c: mt7621: Use devm_clk_get_enabled()
i2c: xiic: Use devm_clk_get_enabled()
i2c: davinci: Use platform table macro over module_alias
i2c: ocores: use devm_ managed clks
i2c: nomadik: Use dev_err_probe() whenever possible
i2c: nomadik: Use devm_clk_get_enabled()
i2c: nomadik: Remove unnecessary goto label
usb: typec: ucsi: Mark dGPUs as DEVICE scope
i2c: wmt: Use devm_platform_get_and_ioremap_resource()
i2c: versatile: Use devm_platform_get_and_ioremap_resource()
i2c: hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
i2c: mpc: Use of_property_read_reg() to parse "reg"
i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP
...

show more ...

i2c: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling

i2c: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asnaa@nvidia.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Chris Pringle <chris.pringle@phabrix.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Tali Perry <tali.perry@nuvoton.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Merge branch 'for-next' into for-linus

Merge branch 'main' into zstd-linus

Merge branch 'for-6.2/default-remove-cleanup' into for-linus

- removal of superfluous hid_hw_stop() calls for drivers with default
.remove callback (Marcus Folkesson)

Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.2

This is a fairly sedate release for the core code, but there's been a
lot

Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.2

This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:

- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588

There's more cross tree updates than usual, though all fairly minor:

- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.

Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.

show more ...

fsi: Add regmap and refactor sbefifo

Merge series from Eddie James <eajames@linux.ibm.com>:

The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR

fsi: Add regmap and refactor sbefifo

Merge series from Eddie James <eajames@linux.ibm.com>:

The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.

This branch just has the regmap change so it can be shared with the FSI
code.

show more ...

Merge tag 'v6.1-rc4' into spi-6.2

Linux 6.1-rc4 which should get my CI working on RPi3s again.

Merge tag 'v6.1-rc4' into regulator-6.2

Linux 6.1-rc4 which should get my CI working on RPi3s again.

Merge tag 'v6.1-rc6' into x86/core, to resolve conflicts

Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c:

# upstream:
debc5a1ec0d1 ("KVM: x86: use a separate asm-offsets.

Merge tag 'v6.1-rc6' into x86/core, to resolve conflicts

Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c:

# upstream:
debc5a1ec0d1 ("KVM: x86: use a separate asm-offsets.c file")

# retbleed work in x86/core:
5d8213864ade ("x86/retbleed: Add SKL return thunk")

... and these commits in include/linux/bpf.h:

# upstram:
18acb7fac22f ("bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")")

# x86/core commits:
931ab63664f0 ("x86/ibt: Implement FineIBT")
bea75b33895f ("x86/Kconfig: Introduce function padding")

The latter two modify BPF_DISPATCHER_ATTRIBUTES(), which was removed upstream.

Conflicts:
arch/x86/kernel/asm-offsets.c
include/linux/bpf.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge 6.1-rc6 into driver-core-next

We need the kernfs changes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to update drm-misc-next-fixes for the final phase
of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Catch up on 6.1-rc cycle in order to solve the intel_backlight
conflict on linux-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

ASoC: Set BQ parameters for some Dell models

There are some Dell SKUs that need to set the parameters of the
crossover filter (biquad). Each amplifier connects to one tweeter
speaker and one woofer

ASoC: Set BQ parameters for some Dell models

There are some Dell SKUs that need to set the parameters of the
crossover filter (biquad). Each amplifier connects to one tweeter
speaker and one woofer speaker. We should control HPF/LPF to output the
proper frequency for the different speakers. If the codec driver got
the BQ parameters from the device property, it will apply these
parameters to the hardware.

show more ...