Revision tags: v6.6.67, v6.6.66, v6.6.65, v6.6.64, v6.6.63, v6.6.62, v6.6.61, v6.6.60, v6.6.59, v6.6.58, v6.6.57, v6.6.56, v6.6.55, v6.6.54, v6.6.53, v6.6.52, v6.6.51, v6.6.50, v6.6.49 |
|
#
26d0dfbb |
| 29-Aug-2024 |
Andrew Jeffery <andrew@codeconstruct.com.au> |
Merge tag 'v6.6.48' into for/openbmc/dev-6.6
This is the 6.6.48 stable release
|
Revision tags: v6.6.48, v6.6.47, v6.6.46, v6.6.45, v6.6.44, v6.6.43, v6.6.42, v6.6.41, v6.6.40, v6.6.39, v6.6.38, v6.6.37, v6.6.36, v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8 |
|
#
ab7554fb |
| 14-Dec-2023 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
drm/msm/mdss: specify cfg bandwidth for SDM670
commit 8d35217149daa33358c284aca6a56d5ab92cfc6c upstream.
Lower the requested CFG bus bandwidth for the SDM670 platform. The default value is 153600 k
drm/msm/mdss: specify cfg bandwidth for SDM670
commit 8d35217149daa33358c284aca6a56d5ab92cfc6c upstream.
Lower the requested CFG bus bandwidth for the SDM670 platform. The default value is 153600 kBps, which is twice as big as required by the platform according to the vendor kernel.
Fixes: a55c8ff252d3 ("drm/msm/mdss: Handle the reg bus ICC path") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Richard Acayan <mailingradian@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/572182/ Link: https://lore.kernel.org/r/20231215013222.827975-1-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
88c232fd |
| 08-Aug-2024 |
Abhinav Kumar <quic_abhinavk@quicinc.com> |
drm/msm: fix the highest_bank_bit for sc7180
[ Upstream commit 3e30296b374af33cb4c12ff93df0b1e5b2d0f80b ]
sc7180 programs the ubwc settings as 0x1e as that would mean a highest bank bit of 14 which
drm/msm: fix the highest_bank_bit for sc7180
[ Upstream commit 3e30296b374af33cb4c12ff93df0b1e5b2d0f80b ]
sc7180 programs the ubwc settings as 0x1e as that would mean a highest bank bit of 14 which matches what the GPU sets as well.
However, the highest_bank_bit field of the msm_mdss_data which is being used to program the SSPP's fetch configuration is programmed to a highest bank bit of 16 as 0x3 translates to 16 and not 14.
Fix the highest bank bit field used for the SSPP to match the mdss and gpu settings.
Fixes: 6f410b246209 ("drm/msm/mdss: populate missing data") Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Stephen Boyd <swboyd@chromium.org> # Trogdor.Lazor Patchwork: https://patchwork.freedesktop.org/patch/607625/ Link: https://lore.kernel.org/r/20240808235227.2701479-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v6.6.7, v6.6.6, v6.6.5, v6.6.4 |
|
#
aba75693 |
| 02-Dec-2023 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
drm/msm/mdss: Handle the reg bus ICC path
[ Upstream commit a55c8ff252d374acb6f78b979cadc38073ce95e8 ]
Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there's another path that needs to
drm/msm/mdss: Handle the reg bus ICC path
[ Upstream commit a55c8ff252d374acb6f78b979cadc38073ce95e8 ]
Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there's another path that needs to be handled to ensure MDSS functions properly, namely the "reg bus", a.k.a the CPU-MDSS interconnect.
Gating that path may have a variety of effects, from none to otherwise inexplicable DSI timeouts.
Provide a way for MDSS driver to vote on this bus.
A note regarding vote values. Newer platforms have corresponding bandwidth values in the vendor DT files. For the older platforms there was a static vote in the mdss_mdp and rotator drivers. I choose to be conservative here and choose this value as a default.
Co-developed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/570164/ Link: https://lore.kernel.org/r/20231202224247.1282567-5-dmitry.baryshkov@linaro.org Stable-dep-of: 3e30296b374a ("drm/msm: fix the highest_bank_bit for sc7180") Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
#
707601fc |
| 02-Dec-2023 |
Konrad Dybcio <konrad.dybcio@linaro.org> |
drm/msm/mdss: Rename path references to mdp_path
[ Upstream commit fabaf176322d687b91a4acf1630c0d0a7d097faa ]
The DPU1 driver needs to handle all MDPn<->DDR paths, as well as CPU<->SLAVE_DISPLAY_CF
drm/msm/mdss: Rename path references to mdp_path
[ Upstream commit fabaf176322d687b91a4acf1630c0d0a7d097faa ]
The DPU1 driver needs to handle all MDPn<->DDR paths, as well as CPU<->SLAVE_DISPLAY_CFG. The former ones share how their values are calculated, but the latter one has static predefines spanning all SoCs.
In preparation for supporting the CPU<->SLAVE_DISPLAY_CFG path, rename the path-related struct members to include "mdp_".
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/570163/ Link: https://lore.kernel.org/r/20231202224247.1282567-3-dmitry.baryshkov@linaro.org Stable-dep-of: 3e30296b374a ("drm/msm: fix the highest_bank_bit for sc7180") Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
#
9611899f |
| 02-Dec-2023 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
drm/msm/mdss: switch mdss to use devm_of_icc_get()
[ Upstream commit ded61d7dc5a0f8cfe7390aba33187c862d09b177 ]
Stop using hand-written reset function for ICC release, use devm_of_icc_get() instead
drm/msm/mdss: switch mdss to use devm_of_icc_get()
[ Upstream commit ded61d7dc5a0f8cfe7390aba33187c862d09b177 ]
Stop using hand-written reset function for ICC release, use devm_of_icc_get() instead.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/570161/ Link: https://lore.kernel.org/r/20231202224247.1282567-2-dmitry.baryshkov@linaro.org Stable-dep-of: 3e30296b374a ("drm/msm: fix the highest_bank_bit for sc7180") Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8 |
|
#
10a6e5fe |
| 13-Oct-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie: "Weekly fixes, the core is msm and amdgpu with some scattered fixes across vmwgfx, panel
Merge tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie: "Weekly fixes, the core is msm and amdgpu with some scattered fixes across vmwgfx, panel and the core stuff.
atomic-helper: - Relax checks for unregistered connectors
dma-buf: - Work around race condition when retrieving fence timestamp
gem: - Avoid OOB access in BO memory range
panel: - boe-tv101wun-ml6: Fix flickering
simpledrm: - Fix error output
vwmgfx: - Fix size calculation in texture-state code - Ref GEM BOs in surfaces
msm: - PHY/link training reset fix - msm8998 - correct highest bank bit - skip video mode if timing engine disabled - check irq_of_parse_and_map return code - add new lines to some prints - fail atomic check for max mdp clk test
amdgpu: - Seamless boot fix - Fix TTM BO resource check - SI fix for doorbell handling"
* tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm: drm/tiny: correctly print `struct resource *` on error drm: Do not overrun array in drm_gem_get_pages() drm/atomic-helper: relax unregistered connector check drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP term drm/amdgpu: fix SI failure due to doorbells allocation drm/amdgpu: add missing NULL check drm/amd/display: Don't set dpms_off for seamless boot drm/vmwgfx: Keep a gem reference to user bos in surfaces drm/vmwgfx: fix typo of sizeof argument drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits dma-buf: add dma_fence_timestamp helper drm/msm/dp: Add newlines to debug printks drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow drm/msm/dsi: fix irq_of_parse_and_map() error checking drm/msm/dsi: skip the wait for video mode done if not applicable drm/msm/mdss: fix highest-bank-bit for msm8998 drm/msm/dp: do not reinitialize phy unless retry during link training
show more ...
|
#
7731cb65 |
| 12-Oct-2023 |
Dave Airlie <airlied@redhat.com> |
Merge tag 'drm-msm-fixes-2023-10-07' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.6-rc5
- fix to not reset the PHY everytime we start link training but only do it if link
Merge tag 'drm-msm-fixes-2023-10-07' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.6-rc5
- fix to not reset the PHY everytime we start link training but only do it if link training fails. Without this, the PLL unlocked interrupt fires causing "Unexpected DP AUX IRQ 0x01000000 when not busy" spam in the logs since last 2-3 cycles - correct the highest bank bit to match downstream device tree for msm8998 - skip the video mode wait if the timing engine is not enabled. This was introduced after pre_enable flag for DSI video mode panels where we would end up waiting for the video mode done interrupt even before enabling timing engine causing error spam and long bootup times. - check the correct return code of irq_of_parse_and_map() in DSI code - avoid overflow issues in the dpu bandwidth calculation . This was exposed for high resolution displays and a critical fix to avoid atomic_check failure - minor fix to add new lines in DP print messages. - Fix to fail atomic_check() if the resolution exceeds max mdp clk. This leads to underflow otherwise if we try to allow that frame.
Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-HNxQ=VBtZ8geGzYJum9jtManEdbvhcjo_WWF_J9Ziw@mail.gmail.com
show more ...
|
Revision tags: v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2 |
|
#
c0666d1d |
| 05-Sep-2023 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
drm/msm/mdss: fix highest-bank-bit for msm8998
According to the vendor DT files, msm8998 has highest-bank-bit equal to 2. Update the data accordingly.
Fixes: 6f410b246209 ("drm/msm/mdss: populate m
drm/msm/mdss: fix highest-bank-bit for msm8998
According to the vendor DT files, msm8998 has highest-bank-bit equal to 2. Update the data accordingly.
Fixes: 6f410b246209 ("drm/msm/mdss: populate missing data") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/555840/ Link: https://lore.kernel.org/r/20230905174353.3118648-2-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
show more ...
|
#
c900529f |
| 12-Sep-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-fixes into drm-misc-fixes
Forwarding to v6.6-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v6.1.51, v6.5.1 |
|
#
1ac731c5 |
| 30-Aug-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.6 merge window.
|
#
461f35f0 |
| 30-Aug-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "The drm core grew a new generic gpu virtual address manager, and new execution locking
Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "The drm core grew a new generic gpu virtual address manager, and new execution locking helpers. These are used by nouveau now to provide uAPI support for the userspace Vulkan driver. AMD had a bunch of new IP core support, loads of refactoring around fbdev, but mostly just the usual amount of stuff across the board.
core: - fix gfp flags in drmm_kmalloc
gpuva: - add new generic GPU VA manager (for nouveau initially)
syncobj: - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf: - acquire resv lock for mmap() in exporters - support dma-buf self import automatically - docs fixes
backlight: - fix fbdev interactions
atomic: - improve logging
prime: - remove struct gem_prim_mmap plus driver updates
gem: - drm_exec: add locking over multiple GEM objects - fix lockdep checking
fbdev: - make fbdev userspace interfaces optional - use linux device instead of fbdev device - use deferred i/o helper macros in various drivers - Make FB core selectable without drivers - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT - Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm: - support init_on_free - swapout fixes
panel: - panel-edp: Support AUO B116XAB01.4 - Support Visionox R66451 plus DT bindings - ld9040: - Backlight support - magic improved - Kconfig fix - Convert to of_device_get_match_data() - Fix Kconfig dependencies - simple: - Set bpc value to fix warning - Set connector type for AUO T215HVN01 - Support Innolux G156HCE-L01 plus DT bindings - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings - sitronix-st7789v: - Support Inanbo T28CP45TN89 plus DT bindings - Support EDT ET028013DMA plus DT bindings - Various cleanups - edp: Add timings for N140HCA-EAC - Allow panels and touchscreens to power sequence together - Fix Innolux G156HCE-L01 LVDS clock
bridge: - debugfs for chains support - dw-hdmi: - Improve support for YUV420 bus format - CEC suspend/resume - update EDID on HDMI detect - dw-mipi-dsi: Fix enable/disable of DSI controller - lt9611uxc: Use MODULE_FIRMWARE() - ps8640: Remove broken EDID code - samsung-dsim: Fix command transfer - tc358764: - Handle HS/VS polarity - Use BIT() macro - Various cleanups - adv7511: Fix low refresh rate - anx7625: - Switch to macros instead of hardcoded values - locking fixes - tc358767: fix hardware delays - sitronix-st7789v: - Support panel orientation - Support rotation property - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu: - SDMA 6.1.0 support - HDP 6.1 support - SMUIO 14.0 support - PSP 14.0 support - IH 6.1 support - Lots of checkpatch cleanups - GFX 9.4.3 updates - Add USB PD and IFWI flashing documentation - GPUVM updates - RAS fixes - DRR fixes - FAMS fixes - Virtual display fixes - Soft IH fixes - SMU13 fixes - Rework PSP firmware loading for other IPs - Kernel doc fixes - DCN 3.0.1 fixes - LTTPR fixes - DP MST fixes - DCN 3.1.6 fixes - SMU 13.x fixes - PSP 13.x fixes - SubVP fixes - GC 9.4.3 fixes - Display bandwidth calculation fixes - VCN4 secure submission fixes - Allow building DC on RISC-V - Add visible FB info to bo_print_info - HBR3 fixes - GFX9 MCBP fix - GMC10 vmhub index fix - GMC11 vmhub index fix - Create a new doorbell manager - SR-IOV fixes - initial freesync panel replay support - revert zpos properly until igt regression is fixeed - use TTM to manage doorbell BAR - Expose both current and average power via hwmon if supported
amdkfd: - Cleanup CRIU dma-buf handling - Use KIQ to unmap HIQ - GFX 9.4.3 debugger updates - GFX 9.4.2 debugger fixes - Enable cooperative groups fof gfx11 - SVM fixes - Convert older APUs to use dGPU path like newer APUs - Drop IOMMUv2 path as it is no longer used - TBA fix for aldebaran
i915: - ICL+ DSI modeset sequence - HDCP improvements - MTL display fixes and cleanups - HSW/BDW PSR1 restored - Init DDI ports in VBT order - General display refactors - Start using plane scale factor for relative data rate - Use shmem for dpt objects - Expose RPS thresholds in sysfs - Apply GuC SLPC min frequency softlimit correctly - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL - Fix a VMA UAF for multi-gt platform - Do not use stolen on MTL due to HW bug - Check HuC and GuC version compatibility on MTL - avoid infinite GPU waits due to premature release of request memory - Fixes and updates for GSC memory allocation - Display SDVO fixes - Take stolen handling out of FBC code - Make i915_coherent_map_type GT-centric - Simplify shmem_create_from_object map_type
msm: - SM6125 MDSS support - DPU: SM6125 DPU support - DSI: runtime PM support, burst mode support - DSI PHY: SM6125 support in 14nm DSI PHY driver - GPU: prepare for a7xx - fix a690 firmware - disable relocs on a6xx and newer
radeon: - Lots of checkpatch cleanups
ast: - improve device-model detection - Represent BMV as virtual connector - Report DP connection status
nouveau: - add new exec/bind interface to support Vulkan - document some getparam ioctls - improve VRAM detection - various fixes/cleanups - workraound DPCD issues
ivpu: - MMU updates - debugfs support - Support vpu4
virtio: - add sync object support
atmel-hlcdc: - Support inverted pixclock polarity
etnaviv: - runtime PM cleanups - hang handling fixes
exynos: - use fbdev DMA helpers - fix possible NULL ptr dereference
komeda: - always attach encoder
omapdrm: - use fbdev DMA helpers ingenic: - kconfig regmap fixes
loongson: - support display controller
mediatek: - Small mtk-dpi cleanups - DisplayPort: support eDP and aux-bus - Fix coverity issues - Fix potential memory leak if vmap() fail
mgag200: - minor fixes
mxsfb: - support disabling overlay planes
panfrost: - fix sync in IRQ handling
ssd130x: - Support per-controller default resolution plus DT bindings - Reduce memory-allocation overhead - Improve intermediate buffer size computation - Fix allocation of temporary buffers - Fix pitch computation - Fix shadow plane allocation
tegra: - use fbdev DMA helpers - Convert to devm_platform_ioremap_resource() - support bridge/connector - enable PM
tidss: - Support TI AM625 plus DT bindings - Implement new connector model plus driver updates
vkms: - improve write back support - docs fixes - support gamma LUT
zynqmp-dpsub: - misc fixes"
* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits) drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() drm/tests/drm_kunit_helpers: Place correct function name in the comment header drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly drm/nouveau: uvmm: fix unset region pointer on remap drm/nouveau: sched: avoid job races between entities drm/i915: Fix HPD polling, reenabling the output poll work as needed drm: Add an HPD poll helper to reschedule the poll work drm/i915: Fix TLB-Invalidation seqno store drm/ttm/tests: Fix type conversion in ttm_pool_test drm/msm/a6xx: Bail out early if setting GPU OOB fails drm/msm/a6xx: Move LLC accessors to the common header drm/msm/a6xx: Introduce a6xx_llc_read drm/ttm/tests: Require MMU when testing drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amdgpu: Add memory vendor information drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: Remove gfxoff check in GFX v9.4.3 drm/amd/pm: Update pci link speed for smu v13.0.6 ...
show more ...
|
Revision tags: v6.1.50, v6.5, v6.1.49, v6.1.48 |
|
#
a057efde |
| 24-Aug-2023 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-linus' into for-next
Back-merge the 6.5-devel branch for the clean patch application for 6.6 and resolving merge conflicts.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
#
38f88732 |
| 23-Aug-2023 |
Dave Airlie <airlied@redhat.com> |
Merge tag 'drm-msm-next-2023-08-20' of https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.6, which includes a backmerge of msm-fixes to avoid conficts.
Core: - SM6125 MDSS support
Merge tag 'drm-msm-next-2023-08-20' of https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.6, which includes a backmerge of msm-fixes to avoid conficts.
Core: - SM6125 MDSS support
DPU: - SM6125 DPU support - Added subblocks to display snapshot - Use UBWC data from MDSS driver rather than duplicating it - dpu_core_perf cleanup
DSI: - Enabled burst mode to fix CMD mode panels - Runtime PM support - refgen regulator support
DSI PHY: - SM6125 support in 14nm DSI PHY driver
GPU: - Rework GPU identification to prepare for a7xx, and other a7xx prep - Cleanups and fixes - Disallow legacy relocs on a6xx and newer - a690: switch to using a660_gmu.bin fw as this is what we have in linux-firmware and we see no evidence that it should be different from other a660 family (a6xx subgen 4) devices - Submit overhead opts, 1.6x faster for NO_IMPLICIT_SYNC commits with 100 BOs to 2.5x faster for 1000 BOs
Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv_01g-edjdfKLWWcb-rO5aSyLsv5FpbKrTkXVL9+ngTQ@mail.gmail.com
show more ...
|
#
fdebffeb |
| 23-Aug-2023 |
Dave Airlie <airlied@redhat.com> |
BackMerge tag 'v6.5-rc7' into drm-next
Linux 6.5-rc7
This is needed for the CI stuff and the msm pull has fixes in it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
#
a3dd14c0 |
| 21-Aug-2023 |
Georgi Djakov <djakov@kernel.org> |
Merge tag 'v6.5-rc6' into icc-next
The fixes that got merged into v6.5-rc6 are needed here.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
Revision tags: v6.1.46 |
|
#
a35762dd |
| 15-Aug-2023 |
Jason Gunthorpe <jgg@nvidia.com> |
Merge tag 'v6.5-rc6' into iommufd for-next
Required for following patches.
Resolve merge conflict by using the hunk from the for-next branch and shifting the iommufd_object_deref_user() into iommuf
Merge tag 'v6.5-rc6' into iommufd for-next
Required for following patches.
Resolve merge conflict by using the hunk from the for-next branch and shifting the iommufd_object_deref_user() into iommufd_hw_pagetable_put()
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
show more ...
|
Revision tags: v6.1.45, v6.1.44 |
|
#
2612e3bb |
| 07-Aug-2023 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catching-up with drm-next and drm-intel-gt-next. It will unblock a code refactor around the platform definitions (names vs acronyms).
Signed-off-by: Rodrigo V
Merge drm/drm-next into drm-intel-next
Catching-up with drm-next and drm-intel-gt-next. It will unblock a code refactor around the platform definitions (names vs acronyms).
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
show more ...
|
#
fa0f4d07 |
| 07-Aug-2023 |
Rob Clark <robdclark@chromium.org> |
Merge branch 'msm-fixes' into msm-next
Back-merge msm-fixes to resolve conflicts.
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
#
9f771739 |
| 07-Aug-2023 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as a dependency for https://patchwork.freedesktop.org/series/1
Merge drm/drm-next into drm-intel-gt-next
Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as a dependency for https://patchwork.freedesktop.org/series/121735/
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
#
bf184299 |
| 04-Aug-2023 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'torvalds/master' into perf-tools-next
To pick up the fixes that were just merged from perf-tools/perf-tools for v6.5.
Signed-off-by: Arnaldo Carvalho de Melo <acme@red
Merge remote-tracking branch 'torvalds/master' into perf-tools-next
To pick up the fixes that were just merged from perf-tools/perf-tools for v6.5.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show more ...
|
#
4d84f763 |
| 04-Aug-2023 |
Takashi Iwai <tiwai@suse.de> |
Merge tag 'asoc-fix-v6.5-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fix for v6.5
Not really a fix, but rather a licensing update for the fsl_micfil d
Merge tag 'asoc-fix-v6.5-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fix for v6.5
Not really a fix, but rather a licensing update for the fsl_micfil driver.
show more ...
|
#
35b1b1fd |
| 03-Aug-2023 |
Jakub Kicinski <kuba@kernel.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.
Conflicts:
net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using ph
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.
Conflicts:
net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/
net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/
drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace")
drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
Revision tags: v6.1.43 |
|
#
6f410b24 |
| 28-Jul-2023 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
drm/msm/mdss: populate missing data
As we are going to use MDSS data for DPU programming, populate missing MDSS data. The UBWC 1.0 and no UBWC cases do not require MDSS programming, so skip them.
S
drm/msm/mdss: populate missing data
As we are going to use MDSS data for DPU programming, populate missing MDSS data. The UBWC 1.0 and no UBWC cases do not require MDSS programming, so skip them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/550055/ Link: https://lore.kernel.org/r/20230728213320.97309-5-dmitry.baryshkov@linaro.org
show more ...
|
#
71e00fc0 |
| 28-Jul-2023 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
drm/msm/mdss: export UBWC data
DPU programming requires knowledge of some of UBWC parameters. This results in duplication of UBWC data between MDSS and DPU drivers. Export the required data from MDS
drm/msm/mdss: export UBWC data
DPU programming requires knowledge of some of UBWC parameters. This results in duplication of UBWC data between MDSS and DPU drivers. Export the required data from MDSS driver.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550052/ Link: https://lore.kernel.org/r/20230728213320.97309-4-dmitry.baryshkov@linaro.org
show more ...
|