Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These rework cpuidle governors to call tick_nohz_get_slee

Merge tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These rework cpuidle governors to call tick_nohz_get_sleep_length()
less often and fix one of them, rework hibernation to avoid storing
pages filled with zeros in hibernation images, switch over some
cpufreq drivers to use void remove callbacks, fix and clean up
multiple cpufreq drivers, fix the devfreq core, update the cpupower
utility and make other assorted improvements.

Specifics:

- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki)

- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang)

- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal)

- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang)

- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies)

- Migrate cpufreq drivers for various platforms to use void remove
callback (Yangtao Li)

- Add online/offline/exit hooks for Tegra driver (Sumit Gupta)

- Explicitly include correct DT includes in cpufreq (Rob Herring)

- Frequency domain updates for qcom-hw driver (Neil Armstrong)

- Modify AMD pstate driver return the highest_perf value (Meng Li)

- Generic cleanups for cppc, mediatek and powernow driver (Liao
Chang, Konrad Dybcio)

- Add more platforms to cpufreq-arm driver's blocklist
(AngeloGioacchino Del Regno and Konrad Dybcio)

- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)

- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson)

- Rework hibernation memory snapshotting to avoid storing pages
filled with zeros in hibernation image files (Brian Geffon)

- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin)

- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin)

- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi)

- Fix memory leak in devfreq_dev_release() (Boris Brezillon)

- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam)

- Explicitly include correct DT includes in devfreq (Rob Herring)

- Remove unsued pm_runtime_update_max_time_suspended() extern
declaration (YueHaibing)

- Add turbo-boost support to cpupower (Wyes Karny)

- Add support for amd_pstate mode change to cpupower (Wyes Karny)

- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati)

- Clean up OPP code and add new frequency related APIs to it (Viresh
Kumar, Manivannan Sadhasivam)

- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)"

* tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq: tegra194: remove opp table in exit hook
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
cpufreq: tegra194: add online/offline hooks
cpuidle: teo: Avoid unnecessary variable assignments
cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
cpufreq: amd-pstate-ut: Remove module parameter access
cpufreq: Use clamp() helper macro to improve the code readability
PM: sleep: Add helpers to allow a device to remain powered-on
PM: QoS: Add check to make sure CPU latency is non-negative
PM: runtime: Remove unsued extern declaration of pm_runtime_update_max_time_suspended()
cpufreq: intel_pstate: set stale CPU frequency to minimum
cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
dt-bindings: cpufreq: Convert ti-cpufreq to json schema
dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
OPP: Fix argument name in doc comment
cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
...

show more ...

Merge branches 'pm-devfreq' and 'pm-tools'

Merge devfreq changes and power management tools changes for 6.6-rc1:

- Fix memory leak in devfreq_dev_release() (Boris Brezillon).

- Rewrite devfreq_m

Merge branches 'pm-devfreq' and 'pm-tools'

Merge devfreq changes and power management tools changes for 6.6-rc1:

- Fix memory leak in devfreq_dev_release() (Boris Brezillon).

- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam).

- Explicitly include correct DT includes in devfreq (Rob Herring).

- Add turbo-boost support to cpupower (Wyes Karny).

- Add support for amd_pstate mode change to cpupower (Wyes Karny).

- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati).

* pm-devfreq:
PM / devfreq: Fix leak in devfreq_dev_release()
PM / devfreq: Reword the kernel-doc comment for devfreq_monitor_start() API
PM / devfreq: Explicitly include correct DT includes

* pm-tools:
cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation.
cpupower: Add turbo-boost support in cpupower
cpupower: Add support for amd_pstate mode change
cpupower: Add EPP value change support
cpupower: Add is_valid_path API
cpupower: Recognise amd-pstate active mode driver
cpupower: Bump soname version

show more ...

Merge tag 'devfreq-next-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux

Pull devfreq iupdates for v6.6 from Chanwoo Choi:

"- Include correct DT header explicitly for imx-bus

Merge tag 'devfreq-next-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux

Pull devfreq iupdates for v6.6 from Chanwoo Choi:

"- Include correct DT header explicitly for imx-bus/imx8m-ddrc/
mtk-cci/tegra30 tegra drivers.

- Reword the kernel-doc comment for devfreq_monitor_start() API using
to specify the default timer as deferrable timer because devfreq core
supports both delayed timer and deferrable timer according to devfreq
device profile.

- Add missing srcu_cleanup_notifier_head() when releasing devfreq
device. srcu_init_notifier_head() allocates resources that need to
be released with a srcu_cleanup_notifier_head() call."

* tag 'devfreq-next-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: Fix leak in devfreq_dev_release()
PM / devfreq: Reword the kernel-doc comment for devfreq_monitor_start() API
PM / devfreq: Explicitly include correct DT includes

show more ...

PM / devfreq: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of

PM / devfreq: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'for-6.1/nvdimm' into libnvdimm-for-next

Add v6.1 content on top of some straggling updates that missed v6.0.

Merge branch 'mlx5-vfio' into mlx5-next

Merge net/mlx5 dependencies for device DMA logging.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Merge branch 'for-6.0/dax' into libnvdimm-fixes

Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.

Merge tag 'v6.0-rc6' into locking/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-misc-next

We need 6.0-rc1 to merge the backlight rework PR.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'am5748-fix' into fixes

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
q

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
queueing up new commits.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'sched/warnings' into sched/core, to pick up WARN_ON_ONCE() conversion commit

Merge in the BUG_ON() => WARN_ON_ONCE() conversion commit.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info pri

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info printing from time stamp logging") yet, only
drm-intel-gt-next, will need to do that as part of the merge here to
build.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging for v6.0-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other drive

Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.

Highlights include:

- large set of IIO driver updates, additions, and cleanups

- new habanalabs device support added (loads of register maps much
like GPUs have)

- soundwire driver updates

- phy driver updates

- slimbus driver updates

- tiny virt driver fixes and updates

- misc driver fixes and updates

- interconnect driver updates

- hwtracing driver updates

- fpga driver updates

- extcon driver updates

- firmware driver updates

- counter driver update

- mhi driver fixes and updates

- binder driver fixes and updates

- speakup driver fixes

All of these have been in linux-next for a while without any reported
problems"

* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...

show more ...

Merge tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These are mostly minor improvements all over including n

Merge tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These are mostly minor improvements all over including new CPU IDs for
the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
updates, documentation cleanups and a new version of the pm-graph
suite of utilities.

Specifics:

- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).

- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).

- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).

- Print a warning message on attempts to free an active cpufreq
policy which should never happen (Viresh Kumar).

- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).

- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).

- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).

- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).

- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).

- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).

- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).

- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).

- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).

- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).

- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).

- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).

- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).

- Address kernel-doc warnings by adding the description for unused
function parameters in devfreq core (Mauro Carvalho Chehab).

- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).

- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).

- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).

- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).

- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello)"

* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
PM: QoS: Add check to make sure CPU freq is non-negative
PM: hibernate: defer device probing when resuming from hibernation
intel_idle: make SPR C1 and C1E be independent
cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
cpufreq: loongson2: fix Kconfig "its" grammar
pm-graph v5.9
cpufreq: Warn users while freeing active policy
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
PM: domains: Ensure genpd_debugfs_dir exists before remove
PM: runtime: Extend support for wakeirq for force_suspend|resume
...

show more ...

Merge branches 'pm-devfreq', 'pm-qos', 'pm-tools' and 'pm-docs'

Merge devfreq changes, PM QoS change, and power management tools and
documentation changes for v5.20-rc1:

- Add new devfreq driver f

Merge branches 'pm-devfreq', 'pm-qos', 'pm-tools' and 'pm-docs'

Merge devfreq changes, PM QoS change, and power management tools and
documentation changes for v5.20-rc1:

- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).

- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).

- Address kernel-doc warnings by adding the description for unused
fucntion parameters in devfreq core (Mauro Carvalho Chehab).

- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).

- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).

- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).

- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).

- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello).

* pm-devfreq:
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings

* pm-qos:
PM: QoS: Add check to make sure CPU freq is non-negative

* pm-tools:
pm-graph v5.9

* pm-docs:
Documentation: PM: Drop pme_interrupt reference

show more ...

Merge tag 'devfreq-next-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux

Pull devfreq updates for v5.20 from Chanwoo Choi:

"1. Add new Mediatek CCI (Cache Coherent Interconn

Merge tag 'devfreq-next-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux

Pull devfreq updates for v5.20 from Chanwoo Choi:

"1. Add new Mediatek CCI (Cache Coherent Interconnect) devfreq driver

- Add new MediaTek Cache Coherent Interconnect (CCI) devfreq drviver
which supports the dynamic voltage and clock scaling.

This driver uses the passive devfreq governor to get target
frequencies and adjust voltages because it depends on MediaTek
CPU frequency driver. In MT8183 and MT8186, the MediaTek CCI is
supplied by the same regulators with the little core CPUs.

2. Update devfreq drivers

- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c.

- Remove kernel-doc warnings by adding the description for unused
fucntion parameters on devfreq core.

- Use NULL to pass a null pointer rather than zero according to
function propotype on imx-bus.c.

- Print error message instead of error interger value on
tegra30-devfreq.c."

* tag 'devfreq-next-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings

show more ...

Merge tag 'icc-5.20-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

Georgi writes:

interconnect changes for 5.20

Here are the interconnect changes for the 5

Merge tag 'icc-5.20-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

Georgi writes:

interconnect changes for 5.20

Here are the interconnect changes for the 5.20-rc1 merge window consisting
of two new drivers, misc driver improvements and new device managed API.

Core change:
- Add device managed bulk API

Driver changes:
- New driver for NXP i.MX8MP platforms
- New driver for Qualcomm SM6350 platforms
- Multiple bucket support for Qualcomm RPM-based drivers.

Signed-off-by: Georgi Djakov <djakov@kernel.org>

* tag 'icc-5.20-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
PM / devfreq: imx: Register i.MX8MP interconnect device
interconnect: imx: Add platform driver for imx8mp
interconnect: imx: configure NoC mode/prioriry/ext_control
interconnect: imx: introduce imx_icc_provider
interconnect: imx: set src node
interconnect: imx: fix max_node_id
interconnect: qcom: icc-rpm: Set bandwidth and clock for bucket values
interconnect: qcom: icc-rpm: Support multiple buckets
interconnect: qcom: icc-rpm: Change to use qcom_icc_xlate_extended()
interconnect: qcom: Move qcom_icc_xlate_extended() to a common file
dt-bindings: interconnect: Update property for icc-rpm path tag
interconnect: icc-rpm: Set destination bandwidth as well as source bandwidth
interconnect: qcom: msm8939: Use icc_sync_state
interconnect: add device managed bulk API
dt-bindings: interconnect: add fsl,imx8mp.h
dt-bindings: interconnect: imx8m: Add bindings for imx8mp noc
interconnect: qcom: Add SM6350 driver support
dt-bindings: interconnect: Add Qualcomm SM6350 NoC support
dt-bindings: interconnect: qcom: Split out rpmh-common bindings
interconnect: qcom: icc-rpmh: Support child NoC device probe

show more ...