Merge tag 'v6.6.60' into for/openbmc/dev-6.6

This is the 6.6.60 stable release

cxl/port: Fix use-after-free, permit out-of-order decoder shutdown

commit 101c268bd2f37e965a5468353e62d154db38838e upstream.

In support of investigating an initialization failure report [1],
cxl_te

cxl/port: Fix use-after-free, permit out-of-order decoder shutdown

commit 101c268bd2f37e965a5468353e62d154db38838e upstream.

In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:

cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]

At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.

The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.

In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.

A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously.

Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: stable@vger.kernel.org
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.37' into dev-6.6

This is the 6.6.37 stable release

cxl/region: check interleave capability

[ Upstream commit 84328c5acebc10c8cdcf17283ab6c6d548885bfc ]

Since interleave capability is not verified, if the interleave
capability of a target does not m

cxl/region: check interleave capability

[ Upstream commit 84328c5acebc10c8cdcf17283ab6c6d548885bfc ]

Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.

In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.

Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.

Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.

Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
eIW means encoded Interleave Ways.
eIG means encoded Interleave Granularity.

in HPA:
if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
the interleave bits are none, the following check is ignored.

if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.

if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW - 1.

if the interleave mask is insufficient to cover the required interleave
bits, the target cannot be attached to the region.

Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240614084755.59503-2-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.11' into dev-6.6

This is the 6.6.11 stable release

Merge tag 'v6.6.8' into dev-6.6

This is the 6.6.8 stable release

cxl/hdm: Fix a benign lockdep splat

commit 36a1c2ee50f573972aea3c3019555f47ee0094c0 upstream.

The new helper "cxl_num_decoders_committed()" added a lockdep assertion
to validate that port->commit_e

cxl/hdm: Fix a benign lockdep splat

commit 36a1c2ee50f573972aea3c3019555f47ee0094c0 upstream.

The new helper "cxl_num_decoders_committed()" added a lockdep assertion
to validate that port->commit_end is protected against modification.
That assertion fires in init_hdm_decoder() where it is initializing
port->commit_end. Given that it is both accessing and writing that
property it obstensibly needs the lock.

In practice, CXL decoder commit rules (must commit in order) and the
in-order discovery of device decoders makes the manipulation of
->commit_end in init_hdm_decoder() safe. However, rather than rely on
the subtle rules of CXL hardware, just make the implementation obviously
correct from a software perspective.

The Fixes: tag is only for cleaning up a lockdep splat, there is no
functional issue addressed by this fix.

Fixes: 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170025232811.2147250.16376901801315194121.stgit@djiang5-mobl3
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

cxl: Add cxl_decoders_committed() helper

[ Upstream commit 458ba8189cb4380aa6a6cc4d52ab067f80a64829 ]

Add a helper to retrieve the number of decoders committed for the port.
Replace all the open co

cxl: Add cxl_decoders_committed() helper

[ Upstream commit 458ba8189cb4380aa6a6cc4d52ab067f80a64829 ]

Add a helper to retrieve the number of decoders committed for the port.
Replace all the open coding of the calculation with the helper.

Link: https://lore.kernel.org/linux-cxl/651c98472dfed_ae7e729495@dwillia2-xfh.jf.intel.com.notmuch/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/169747906849.272156.1729290904857372335.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5558b92e8d39 ("cxl/core: Always hold region_rwsem while reading poison lists")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

cxl/hdm: Fix dpa translation locking

commit 6f5c4eca48ffe18307b4e1d375817691c9005c87 upstream.

The helper, cxl_dpa_resource_start(), snapshots the dpa-address of an
endpoint-decoder after acquiring

cxl/hdm: Fix dpa translation locking

commit 6f5c4eca48ffe18307b4e1d375817691c9005c87 upstream.

The helper, cxl_dpa_resource_start(), snapshots the dpa-address of an
endpoint-decoder after acquiring the cxl_dpa_rwsem. However, it is
sufficient to assert that cxl_dpa_rwsem is held rather than acquire it
in the helper. Otherwise, it triggers multiple lockdep reports:

1/ Tracing callbacks are in an atomic context that can not acquire sleeping
locks:

BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1525
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1288, name: bash
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
[..]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023
Call Trace:
<TASK>
dump_stack_lvl+0x71/0x90
__might_resched+0x1b2/0x2c0
down_read+0x1a/0x190
cxl_dpa_resource_start+0x15/0x50 [cxl_core]
cxl_trace_hpa+0x122/0x300 [cxl_core]
trace_event_raw_event_cxl_poison+0x1c9/0x2d0 [cxl_core]

2/ The rwsem is already held in the inject poison path:

WARNING: possible recursive locking detected
6.7.0-rc2+ #12 Tainted: G W OE N
--------------------------------------------
bash/1288 is trying to acquire lock:
ffffffffc05f73d0 (cxl_dpa_rwsem){++++}-{3:3}, at: cxl_dpa_resource_start+0x15/0x50 [cxl_core]

but task is already holding lock:
ffffffffc05f73d0 (cxl_dpa_rwsem){++++}-{3:3}, at: cxl_inject_poison+0x7d/0x1e0 [cxl_core]
[..]
Call Trace:
<TASK>
dump_stack_lvl+0x71/0x90
__might_resched+0x1b2/0x2c0
down_read+0x1a/0x190
cxl_dpa_resource_start+0x15/0x50 [cxl_core]
cxl_trace_hpa+0x122/0x300 [cxl_core]
trace_event_raw_event_cxl_poison+0x1c9/0x2d0 [cxl_core]
__traceiter_cxl_poison+0x5c/0x80 [cxl_core]
cxl_inject_poison+0x1bc/0x1e0 [cxl_core]

This appears to have been an issue since the initial implementation and
uncovered by the new cxl-poison.sh test [1]. That test is now passing with
these changes.

Fixes: 28a3ae4ff66c ("cxl/trace: Add an HPA to cxl_poison trace events")
Link: http://lore.kernel.org/r/e4f2716646918135ddbadf4146e92abb659de734.1700615159.git.alison.schofield@intel.com [1]
Cc: <stable@vger.kernel.org>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.6' into dev-6.6

This is the 6.6.6 stable release

Signed-off-by: Joel Stanley <joel@jms.id.au>

cxl/hdm: Remove broken error path

[ Upstream commit 5d09c63f11f083707b60c8ea0bb420651c47740f ]

Dan reports that cxl_decoder_commit() potentially leaks a hold of
cxl_dpa_rwsem. The potential error c

cxl/hdm: Remove broken error path

[ Upstream commit 5d09c63f11f083707b60c8ea0bb420651c47740f ]

Dan reports that cxl_decoder_commit() potentially leaks a hold of
cxl_dpa_rwsem. The potential error case is a "should not" happen
scenario, turn it into a "can not" happen scenario by adding the error
check to cxl_port_setup_targets() where other setting validation occurs.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: http://lore.kernel.org/r/63295673-5d63-4919-b851-3b06d48734c0@moroto.mountain
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

cxl/core/regs: Rename @dev to @host in struct cxl_register_map

[ Upstream commit dd22581f89537163f065e8ef7c125ce0fddf62cc ]

The primary role of @dev is to host the mappings for devm operations.
@de

cxl/core/regs: Rename @dev to @host in struct cxl_register_map

[ Upstream commit dd22581f89537163f065e8ef7c125ce0fddf62cc ]

The primary role of @dev is to host the mappings for devm operations.
@dev is too ambiguous as a name. I.e. when does @dev refer to the
'struct device *' instance that the registers belong, and when does
@dev refer to the 'struct device *' instance hosting the mapping for
devm operations?

Clarify the role of @dev in cxl_register_map by renaming it to @host.
Also, rename local variables to 'host' where map->host is used.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-3-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 33d9c987bf8f ("cxl/port: Fix @host confusion in cxl_dport_setup_regs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

cxl/memdev: Fix sanitize vs decoder setup locking

[ Upstream commit 339818380868e34ff2c482db05031bf47a67d609 ]

The sanitize operation is destructive and the expectation is that the
device is unmapp

cxl/memdev: Fix sanitize vs decoder setup locking

[ Upstream commit 339818380868e34ff2c482db05031bf47a67d609 ]

The sanitize operation is destructive and the expectation is that the
device is unmapped while in progress. The current implementation does a
lockless check for decoders being active, but then does nothing to
prevent decoders from racing to be committed. Introduce state tracking
to resolve this race.

This incidentally cleans up unpriveleged userspace from triggering mmio
read cycles by spinning on reading the 'security/state' attribute. Which
at a minimum is a waste since the kernel state machine can cache the
completion result.

Lastly cxl_mem_sanitize() was mistakenly marked EXPORT_SYMBOL() in the
original implementation, but an export was never required.

Fixes: 0c36b6ad436a ("cxl/mbox: Add sanitization handling machinery")
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL

Merge tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL Performance Monitor definition that appeared in CXL 3.0,
support for device sanitization (wiping all data from a device),
secure-erase (re-keying encryption of user data), and support for
firmware update. The firmware update support is notable as it reuses
the simple sysfs_upload interface to just cat(1) a blob to a sysfs
file and pipe that to the device.

Additionally there are a substantial number of cleanups and
reorganizations to get ready for RCH error handling (RCH == Restricted
CXL Host == current shipping hardware generation / pre CXL-2.0
topologies) and type-2 (accelerator / vendor specific) devices.

For vendor specific devices they implement a subset of what the
generic type-3 (generic memory expander) driver expects. As a result
the rework decouples optional infrastructure from the core driver
context.

For RCH topologies, where the specification working group did not want
to confuse pre-CXL-aware operating systems, many of the standard
registers are hidden which makes support standard bus features like
AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
the driver to help the PCI-AER core. Bjorn is on board with this
direction but a late regression disocvery means the completion of this
functionality needs to cook a bit longer, so it is code
reorganizations only for now.

Summary:

- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update

- Introduce a CXL performance monitoring unit driver based on the
common definition in the specification.

- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.

- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)

- Fix region reconfiguration vs CXL decoder ordering rules"

* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
cxl: Fix one kernel-doc comment
cxl/pci: Use correct flag for sanitize polling
docs: perf: Minimal introduction the the CXL PMU device and driver
perf: CXL Performance Monitoring Unit driver
tools/testing/cxl: add firmware update emulation to CXL memdevs
tools/testing/cxl: Use named effects for the Command Effect Log
tools/testing/cxl: Fix command effects for inject/clear poison
cxl: add a firmware update mechanism using the sysfs firmware loader
cxl/test: Add Secure Erase opcode support
cxl/mem: Support Secure Erase
cxl/test: Add Sanitize opcode support
cxl/mem: Wire up Sanitization support
cxl/mbox: Add sanitization handling machinery
cxl/mem: Introduce security state sysfs file
cxl/mbox: Allow for IRQ_NONE case in the isr
Revert "cxl/port: Enable the HDM decoder capability for switch ports"
cxl/memdev: Formalize endpoint port linkage
cxl/pci: Unconditionally unmask 256B Flit errors
cxl/region: Manage decoder target_type at decoder-attach time
cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
...

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge branch 'for-6.5/cxl-rch-eh' into for-6.5/cxl

Pick up the first half of the RCH error handling series. The back half
needs some fixups for test regressions. Small conflicts with the PMU
work ar

Merge branch 'for-6.5/cxl-rch-eh' into for-6.5/cxl

Pick up the first half of the RCH error handling series. The back half
needs some fixups for test regressions. Small conflicts with the PMU
work around register enumeration and setup helpers.

show more ...

Merge branch 'for-6.5/cxl-type-2' into for-6.5/cxl

Pick up the driver cleanups identified in preparation for CXL "type-2"
(accelerator) device support. The major change here from a conflict
generati

Merge branch 'for-6.5/cxl-type-2' into for-6.5/cxl

Pick up the driver cleanups identified in preparation for CXL "type-2"
(accelerator) device support. The major change here from a conflict
generation perspective is the split of 'struct cxl_memdev_state' from
the core 'struct cxl_dev_state'. Since an accelerator may not care about
all the optional features that are standard on a CXL "type-3" (host-only
memory expander) device.

A silent conflict also occurs with the move of the endpoint port to be a
formal property of a 'struct cxl_memdev' rather than drvdata.

show more ...