Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there a

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.

If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.

New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK

Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver

Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...

show more ...

Merge branches 'clk-bindings', 'clk-starfive', 'clk-rm', 'clk-renesas' and 'clk-cleanup' into clk-next

- Remove OXNAS clk driver

* clk-bindings:
dt-bindings: clock: versal: Convert the xlnx,zynq

Merge branches 'clk-bindings', 'clk-starfive', 'clk-rm', 'clk-renesas' and 'clk-cleanup' into clk-next

- Remove OXNAS clk driver

* clk-bindings:
dt-bindings: clock: versal: Convert the xlnx,zynqmp-clk.txt to yaml
dt-bindings: clock: xlnx,versal-clk: drop select:false
dt-bindings: clock: versal: Add versal-net compatible string
dt-bindings: clock: ast2600: Add I3C and MAC reset definitions
dt-bindings: arm: hisilicon,cpuctrl: Merge "hisilicon,hix5hd2-clock" into parent binding

* clk-starfive:
reset: starfive: jh7110: Add StarFive STG/ISP/VOUT resets support
clk: starfive: Simplify .determine_rate()
clk: starfive: Add StarFive JH7110 Video-Output clock driver
clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver
clk: starfive: Add StarFive JH7110 System-Top-Group clock driver
clk: starfive: jh7110-sys: Add PLL clocks source from DTS
clk: starfive: Add StarFive JH7110 PLL clock driver
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator
dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator
dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs
dt-bindings: soc: starfive: Add StarFive syscon module
dt-bindings: clock: Add StarFive JH7110 PLL clock generator

* clk-rm:
dt-bindings: clk: oxnas: remove obsolete bindings
clk: oxnas: remove obsolete clock driver

* clk-renesas:
clk: renesas: rcar-gen3: Add ADG clocks
clk: renesas: r8a77965: Add 3DGE and ZG support
clk: renesas: r8a7796: Add 3DGE and ZG support
clk: renesas: r8a7795: Add 3DGE and ZG support
clk: renesas: emev2: Remove obsolete clkdev registration
clk: renesas: r9a07g043: Add MTU3a clock and reset entry
clk: renesas: rzg2l: Simplify .determine_rate()
clk: renesas: r9a09g011: Add CSI related clocks
clk: renesas: r8a774b1: Add 3DGE and ZG support
clk: renesas: r8a774e1: Add 3DGE and ZG support
clk: renesas: r8a774a1: Add 3DGE and ZG support
clk: renesas: rcar-gen3: Add support for ZG clock

* clk-cleanup:
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()
clk: Explicitly include correct DT includes

show more ...

clk: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that mer

clk: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'for-6.2/apple' into for-linus

- new quirks for select Apple keyboards (Kerem Karabay, Aditya Garg)

Merge branch 'next' into for-linus

Prepare input updates for 6.2 merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to update drm-misc-next-fixes for the final phase
of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Catch up on 6.1-rc cycle in order to solve the intel_backlight
conflict on linux-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/s

Merge drm/drm-next into drm-intel-gt-next

Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/series/110083/ .

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'main' into zstd-next

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get v6.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly repre

ASoC: jz4752b: Capture fixes

Merge series from Siarhei Volkau <lis8215@gmail.com>:

The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master

show more ...

Merge drm/drm-next into drm-misc-next

Let's kick-off this release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v6.1-rc1' into next

Merge with mainline to bring in the latest changes to twl4030 driver.

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"We have some late breaking reports that a patch series to rework clk
rate

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"We have some late breaking reports that a patch series to rework clk
rate range support broke boot on some devices, so I've left that
branch out of this. Hopefully we can get to that next week, or punt on
it and let it bake another cycle. That means we don't really have any
changes to the core framework this time around besides a few typo
fixes. Instead this is all clk driver updates and fixes.

The usual suspects are here (again), with Qualcomm dominating the
diffstat. We look to have gained support for quite a few new Qualcomm
SoCs and Dmitry worked on updating many of the existing Qualcomm
drivers to use clk_parent_data. After that we have MediaTek drivers
getting some much needed updates, in particular to support GPU DVFS.
There are also quite a few Samsung clk driver patches, but that's
mostly because there was a maintainer change and so last release we
missed some of those patches.

Overall things look normal, but I'm slowly reviewing core framework
code nowadays and that shows given the rate range patches had to be
yanked last minute. Let's hope this situation changes soon.

New Drivers:
- Support for Renesas VersaClock7 clock generator family
- Add Spreadtrum UMS512 SoC clk support
- New clock drivers for MediaTek Helio X10 MT6795
- Display clks for Qualcomm SM6115, SM8450
- GPU clks for Qualcomm SC8280XP
- Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers

Deleted Drivers:
- Remove DaVinci DM644x and DM646x clk driver support

Updates:
- Convert Baikal-T1 CCU driver to platform driver
- Split reset support out of primary Baikal-T1 CCU driver
- Add some missing clks required for RPiVid Video Decoder on
RaspberryPi
- Mark PLLC critical on bcm2835
- More devm helpers for fixed rate registration
- Various PXA168 clk driver fixes
- Add resets for MediaTek MT8195 PCIe and USB
- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to
dt-bindings/clock
- Convert gpio-clk-gate binding to YAML
- Various fixes to AMD/Xilinx Zynqmp clk driver
- Graduate AMD/Xilinx "clocking wizard" driver from staging
- Add missing DPI1_HDMI clock in MT8195 VDOSYS1
- Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
- Fix GPU clock topology on MT8195
- Propogate rate changes from GPU clock gate up the tree
- Clock mux notifiers for GPU-related PLLs
- Conversion of more "simple" drivers to mtk_clk_simple_probe()
- Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
- Fixes to previous |struct clk| to |struct clk_hw| conversion on
MediaTek
- Shrink MT8192 clock driver by deduplicating clock parent lists
- Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
clocks for i.MX8MP
- Drop unnecessary newline in i.MX8MM dt-bindings
- Add more MU1 and SAI clocks dt-bindings Ids
- Introduce slice busy bit check for i.MX93 composite clock
- Introduce white list bit check for i.MX93 composite clock
- Add new i.MX93 clock gate
- Add MU1 and MU2 clocks to i.MX93 clock provider
- Add SAI IPG clocks to i.MX93 clock provider
- add generic clocks for U(S)ART available on SAMA5D2 SoCs
- reset controller support for Polarfire clocks
- .round_rate and .set rate support for clk-mpfs
- code cleanup for clk-mpfs
- PLL support for PolarFire SoC's Clock Conditioning Circuitry
- Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car
V4H
- Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
- Add I2C clocks and resets on RZ/V2M
- Document clock support for the RZ/Five SoC
- mux-variant clock using the table variant to select parents
- clock controller for the rv1126 soc
- conversion of rk3128 to yaml and relicensing of the yaml bindings
to gpl2+MIT (following dt-binding guildelines)
- Exynos7885: add FSYS, TREX and MFC clock controllers
- Exynos850: add IS and AUD (audio) clock controllers with bindings
- ExynosAutov9: add FSYS clock controllers with bindings
- ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
controllers, due to duplicated entries. This is an acceptable ABI
break: recently developed/added platform so without legacies, acked
by known users/developers
- ExynosAutov9: add few missing Peric 0/1 gates
- ExynosAutov9: correct register offsets of few Peric 0/1 clocks
- Minor code improvements (use of_device_get_match_data() helper,
code style)
- Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as
he already maintainers that architecture/platform
- Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving
retention issues during suspend of USB on Qualcomm sc7180/sc7280
and SC8280XP
- Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
- Qualcomm SDM660 SDCC1 moved to floor clk ops
- Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018
was added/fixed
- The Qualcomm MSM8996 CPU clocks are updated with support for ACD
- Support for Qualcomm SDM670 GCC and RPMh clks was added
- Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
num_parents was done for many Qualcomm SoCs
- Support for per-reset defined delay on Qualcomm was introduced"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits)
clk: qcom: gcc-sm6375: Ensure unsigned long type
clk: qcom: gcc-sm6375: Remove unused variables
clk: qcom: kpss-xcc: convert to parent data API
clk: introduce (devm_)hw_register_mux_parent_data_table API
clk: allow building lan966x as a module
clk: clk-xgene: simplify if-if to if-else
clk: ast2600: BCLK comes from EPLL
clk: clocking-wizard: Depend on HAS_IOMEM
clk: clocking-wizard: Use dev_err_probe() helper
clk: nxp: fix typo in comment
clk: pxa: add a check for the return value of kzalloc()
clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
dt-bindings: clock: vc5: Add 5P49V6975
clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clk: Renesas versaclock7 ccf device driver
dt-bindings: Renesas versaclock7 device tree bindings
clk: ti: Balance of_node_get() calls for of_find_node_by_name()
clk: imx: scu: fix memleak on platform_device_add() fails
clk: vc5: Use regmap_{set,clear}_bits() where appropriate
...

show more ...

Merge branches 'clk-ofnode', 'clk-bindings', 'clk-cleanup', 'clk-zynq' and 'clk-xilinx' into clk-next

- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to d

Merge branches 'clk-ofnode', 'clk-bindings', 'clk-cleanup', 'clk-zynq' and 'clk-xilinx' into clk-next

- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock
- Convert gpio-clk-gate binding to YAML
- Various fixes to AMD/Xilinx Zynqmp clk driver
- Graduate AMD/Xilinx "clocking wizard" driver from staging

* clk-ofnode:
clk: ti: Balance of_node_get() calls for of_find_node_by_name()
clk: tegra20: Fix refcount leak in tegra20_clock_init
clk: tegra: Fix refcount leak in tegra114_clock_init
clk: tegra: Fix refcount leak in tegra210_clock_init
clk: sprd: Hold reference returned by of_get_parent()
clk: berlin: Add of_node_put() for of_get_parent()
clk: at91: dt-compat: Hold reference returned by of_get_parent()
clk: qoriq: Hold reference returned by of_get_parent()
clk: oxnas: Hold reference returned by of_get_parent()
clk: st: Hold reference returned by of_get_parent()
clk: tegra: Add missing of_node_put()
clk: meson: Hold reference returned by of_get_parent()
clk: nomadik: Add missing of_node_put()

* clk-bindings:
dt-bindings: clock: drop minItems equal to maxItems
dt-bindings: clock: gpio-gate-clock: Convert to json-schema
dt-bindings: clock: Move versaclock.h to dt-bindings/clock
dt-bindings: clock: Move lochnagar.h to dt-bindings/clock

* clk-cleanup:
clk: allow building lan966x as a module
clk: clk-xgene: simplify if-if to if-else
clk: nxp: fix typo in comment
clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clkdev: Simplify devm_clk_hw_register_clkdev() function
clkdev: Remove never used devm_clk_release_clkdev()
clk: Remove never used devm_of_clk_del_provider()
clk: pistachio: Fix initconst confusion
clk: clk-npcm7xx: Remove unused struct npcm7xx_clk_gate_data and npcm7xx_clk_div_fixed_data
clk: do not initialize ret
clk: remove extra empty line
clk: Fix comment typo
clk: move from strlcpy with unused retval to strscpy

* clk-zynq:
clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
clk: zynqmp: Check the return type zynqmp_pm_query_data
clk: zynqmp: Add a check for NULL pointer
clk: zynqmp: Replaced strncpy() with strscpy()
clk: zynqmp: Fix stack-out-of-bounds in strncpy`
clk: zynqmp: make bestdiv unsigned

* clk-xilinx:
clk: clocking-wizard: Depend on HAS_IOMEM
clk: clocking-wizard: Use dev_err_probe() helper
clk: clocking-wizard: Update the compatible
clk: clocking-wizard: Fix the reconfig for 5.2
clk: clocking-wizard: Rename nr-outputs to xlnx,nr-outputs
clk: clocking-wizard: Move clocking-wizard out
dt-bindings: add documentation of xilinx clocking wizard

show more ...

clk: zynqmp: Check the return type zynqmp_pm_query_data

Check the return type of zynqmp_pm_query_data(qdata, ret_payload);

Addresses-Coverity: Event check_return
Signed-off-by: Shubhrajyoti Datta <

clk: zynqmp: Check the return type zynqmp_pm_query_data

Check the return type of zynqmp_pm_query_data(qdata, ret_payload);

Addresses-Coverity: Event check_return
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220406092211.19017-1-shubhrajyoti.datta@xilinx.com
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: zynqmp: Replaced strncpy() with strscpy()

Replaced strncpy() with strscpy() as the clock names are supposed to
be NULL terminated.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.

clk: zynqmp: Replaced strncpy() with strscpy()

Replaced strncpy() with strscpy() as the clock names are supposed to
be NULL terminated.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220510070154.29528-2-shubhrajyoti.datta@xilinx.com
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: zynqmp: Fix stack-out-of-bounds in strncpy`

"BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68"

Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is
longer than 15 by

clk: zynqmp: Fix stack-out-of-bounds in strncpy`

"BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68"

Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is
longer than 15 bytes, string terminated NULL character will not be received
by Linux. Add explicit NULL character at last byte to fix issues when clock
name is longer.

This fixes below bug reported by KASAN:

==================================================================
BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68
Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1

CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3
Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT)
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xd4/0x108
print_address_description.isra.0+0xbc/0x37c
__kasan_report+0x144/0x198
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
strncpy+0x30/0x68
zynqmp_clock_probe+0x238/0x7b8
platform_drv_probe+0x6c/0xc8
really_probe+0x14c/0x418
driver_probe_device+0x74/0x130
__device_attach_driver+0xc4/0xe8
bus_for_each_drv+0xec/0x150
__device_attach+0x160/0x1d8
device_initial_probe+0x10/0x18
bus_probe_device+0xe0/0xf0
device_add+0x528/0x950
of_device_add+0x5c/0x80
of_platform_device_create_pdata+0x120/0x168
of_platform_bus_create+0x244/0x4e0
of_platform_populate+0x50/0xe8
zynqmp_firmware_probe+0x370/0x3a8
platform_drv_probe+0x6c/0xc8
really_probe+0x14c/0x418
driver_probe_device+0x74/0x130
device_driver_attach+0x94/0xa0
__driver_attach+0x70/0x108
bus_for_each_dev+0xe4/0x158
driver_attach+0x30/0x40
bus_add_driver+0x21c/0x2b8
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
zynqmp_firmware_driver_init+0x1c/0x24
do_one_initcall+0xa4/0x234
kernel_init_freeable+0x1b0/0x24c
kernel_init+0x10/0x110
ret_from_fork+0x10/0x18

The buggy address belongs to the page:
page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff
page dumped because: kasan: bad access detected

addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame:
zynqmp_clock_probe+0x0/0x7b8

this frame has 3 objects:
[32, 44) 'response'
[64, 80) 'ret_payload'
[96, 112) 'name'

Memory state around the buggy address:
ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2
>ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Signed-off-by: Ian Nam <young.kwan.nam@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220510070154.29528-3-shubhrajyoti.datta@xilinx.com
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge branch 'for-5.16-vsprintf-pgp' into for-linus