Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'clocksource.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull clocksource watchdog updates from Paul McKenney:

- Handle negative skews in "skew is too

Merge tag 'clocksource.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull clocksource watchdog updates from Paul McKenney:

- Handle negative skews in "skew is too large" messages

- Extend watchdog check exemption to 4-Socket platforms

* tag 'clocksource.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
x86/tsc: Extend watchdog check exemption to 4-Sockets platform
clocksource: Handle negative skews in "skew is too large" messages

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

x86/tsc: Extend watchdog check exemption to 4-Sockets platform

There were reports again that the tsc clocksource on 4 sockets x86
servers was wrongly judged as 'unstable' by 'jiffies' and other
watc

x86/tsc: Extend watchdog check exemption to 4-Sockets platform

There were reports again that the tsc clocksource on 4 sockets x86
servers was wrongly judged as 'unstable' by 'jiffies' and other
watchdogs, and disabled [1][2].

Commit b50db7095fe0 ("x86/tsc: Disable clocksource watchdog for TSC
on qualified platorms") was introduce to deal with these false
alarms of tsc unstable issues, covering qualified platforms for 2
sockets or smaller ones. And from history of chasing TSC issues,
Thomas and Peter only saw real TSC synchronization issue on 8 socket
machines.

So extend the exemption to 4 sockets to fix the issue.

Rui also proposed another way to disable 'jiffies' as clocksource
watchdog [3], which can also solve problem in [1]. in an architecture
independent way, but can't cure the problem in [2]. whose watchdog
is HPET or PMTIMER, while 'jiffies' is mostly used as watchdog in
boot phase.

'nr_online_nodes' has known inaccurate problem for cases like
platform with cpu-less memory nodes, sub numa cluster enabled,
fakenuma, kernel cmdline parameter 'maxcpus=', etc. The harmful case
is the 'maxcpus' one which could possibly under estimates the package
number, and disable the watchdog, but bright side is it is mostly
for debug usage. All these will be addressed in other patches, as
discussed in thread [4].

[1]. https://lore.kernel.org/all/9d3bf570-3108-0336-9c52-9bee15767d29@huawei.com/
[2]. https://lore.kernel.org/lkml/06df410c-2177-4671-832f-339cff05b1d9@paulmck-laptop/
[3]. https://lore.kernel.org/all/bd5b97f89ab2887543fc262348d1c7cafcaae536.camel@intel.com/
[4]. https://lore.kernel.org/all/20221021062131.1826810-1-feng.tang@intel.com/

Reported-by: Yu Liao <liaoyu15@huawei.com>
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

show more ...

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:

- Avoid unnecessar

Merge tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:

- Avoid unnecessary migrations within SMT domains on hybrid systems.

Problem:

On hybrid CPU systems, (processors with a mixture of
higher-frequency SMT cores and lower-frequency non-SMT cores),
under the old code lower-priority CPUs pulled tasks from the
higher-priority cores if more than one SMT sibling was busy -
resulting in many unnecessary task migrations.

Solution:

The new code improves the load balancer to recognize SMT cores
with more than one busy sibling and allows lower-priority CPUs
to pull tasks, which avoids superfluous migrations and lets
lower-priority cores inspect all SMT siblings for the busiest
queue.

- Implement the 'runnable boosting' feature in the EAS balancer:
consider CPU contention in frequency, EAS max util & load-balance
busiest CPU selection.

This improves CPU utilization for certain workloads, while leaves
other key workloads unchanged.

Scheduler infrastructure improvements:

- Rewrite the scheduler topology setup code by consolidating it into
the build_sched_topology() helper function and building it
dynamically on the fly.

- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.

Fixes:

- Fix a kthread_park() race with wait_woken()

- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations
- Fix task_struct::saved_state handling

- Fix various rq clock update bugs, unearthed by turning on the rq
clock debugging code.

- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
by creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or
CAP_SYS_RESOURCE.

- Propagate SMT flags in the topology when removing degenerate domain

- Fix grub_reclaim() calculation bug in the deadline scheduler code

- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().

- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.

- Fix the sched-debug printing of rq->nr_uninterruptible

Cleanups:

- Address various -Wmissing-prototype warnings, as a preparation to
(maybe) enable this warning in the future.

- Remove unused code

- Mark more functions __init

- Fix shadow-variable warnings"

* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
sched/core: Fixed missing rq clock update before calling set_rq_offline()
sched/deadline: Update GRUB description in the documentation
sched/deadline: Fix bandwidth reclaim equation in GRUB
sched/wait: Fix a kthread_park race with wait_woken()
sched/topology: Mark set_sched_topology() __init
sched/fair: Rename variable cpu_util eff_util
arm64/arch_timer: Fix MMIO byteswap
sched/fair, cpufreq: Introduce 'runnable boosting'
sched/fair: Refactor CPU utilization functions
cpuidle: Use local_clock_noinstr()
sched/clock: Provide local_clock_noinstr()
x86/tsc: Provide sched_clock_noinstr()
clocksource: hyper-v: Provide noinstr sched_clock()
clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
x86/vdso: Fix gettimeofday masking
math64: Always inline u128 version of mul_u64_u64_shr()
s390/time: Provide sched_clock_noinstr()
loongarch: Provide noinstr sched_clock_read()
...

show more ...

Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:

- Parallel CPU bringup

Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:

- Parallel CPU bringup

The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.

The current fully serialized bringup does the following per AP:

1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state

There are two significant delays:

#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.

#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.

On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.

This can be reduced significantly by splitting the bringup
mechanism into two parts:

1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.

The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)

2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.

Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.

If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.

The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.

For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.

- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"

* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...

show more ...

x86/tsc: Provide sched_clock_noinstr()

With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code

x86/tsc: Provide sched_clock_noinstr()

With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by providing a noinstr sched_clock_noinstr()
function.

Specifically, preempt_enable_*() calls out to schedule(), which upsets
noinstr validation efforts.

vmlinux.o: warning: objtool: native_sched_clock+0x96: call to preempt_schedule_notrace_thunk() leaves .noinstr.text section
vmlinux.o: warning: objtool: kvm_clock_read+0x22: call to preempt_schedule_notrace_thunk() leaves .noinstr.text section

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.910937674@infradead.org

show more ...

x86/smpboot: Avoid pointless delay calibration if TSC is synchronized

When TSC is synchronized across sockets then there is no reason to
calibrate the delay for the first CPU which comes up on a soc

x86/smpboot: Avoid pointless delay calibration if TSC is synchronized

When TSC is synchronized across sockets then there is no reason to
calibrate the delay for the first CPU which comes up on a socket.

Just reuse the existing calibration value.

This removes 100ms pointlessly wasted time from CPU hotplug per socket.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205255.608773568@linutronix.de

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get latest upstream.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.3-rc1 and sync with the other DRM trees.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next

To pick up perf-tools fixes just merged upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'linus' into objtool/core, to pick up Xen dependencies

Pick up dependencies - freshly merged upstream via xen-next - before applying
dependent objtool changes.

Signed-off-by: Ingo Moln

Merge branch 'linus' into objtool/core, to pick up Xen dependencies

Pick up dependencies - freshly merged upstream via xen-next - before applying
dependent objtool changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:

Merge tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:

Core:

- Yet another round of improvements to make the clocksource watchdog
more robust:

- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.

- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.

- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.

Sigh!

- Initialize the restart block in the nanosleep syscalls to be
directed to the no restart function instead of doing a partial
setup on entry.

This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a
user space bug, preventing this is a correctness issue and caters
to the least suprise principle.

- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.

Drivers:

- The obligatory new driver bindings for Mediatek, Rockchip and
RISC-V variants.

- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.

- Set up a static key in the RISC-V timer correctly before first use.

- The usual small improvements and fixes all over the place"

* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/em_sti: Mark driver as non-removable
clocksource/drivers/sh_tmu: Mark driver as non-removable
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
clocksource/drivers/timer-microchip-pit64b: Add delay timer
clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
dt-bindings: timer: mediatek,mtk-timer: add MT8365
clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
clocksource/drivers/sh_cmt: Mark driver as non-removable
clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
clocksource/drivers/riscv: Increase the clock source rating
clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
dt-bindings: timer: Add bindings for the RISC-V timer device
RISC-V: time: initialize hrtimer based broadcast clock event device
dt-bindings: timer: rk-timer: Add rktimer for rv1126
time/debug: Fix memory leak with using debugfs_lookup()
clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
clocksource: Verify HPET and PMTMR when TSC unverified
...

show more ...

Merge tag 'x86-cleanups-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull miscellaneous x86 cleanups from Thomas Gleixner:

- Correct the common copy and pasted mishandling

Merge tag 'x86-cleanups-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull miscellaneous x86 cleanups from Thomas Gleixner:

- Correct the common copy and pasted mishandling of kstrtobool() in the
strict_sas_size() setup function

- Make recalibrate_cpu_khz() an GPL only export

- Check TSC feature before doing anything else which avoids pointless
code execution if TSC is not available

- Remove or fixup stale and misleading comments

- Remove unused or pointelessly duplicated variables

- Spelling and typo fixes

* tag 'x86-cleanups-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hotplug: Remove incorrect comment about mwait_play_dead()
x86/tsc: Do feature check as the very first thing
x86/tsc: Make recalibrate_cpu_khz() export GPL only
x86/cacheinfo: Remove unused trace variable
x86/Kconfig: Fix spellos & punctuation
x86/signal: Fix the value returned by strict_sas_size()
x86/cpu: Remove misleading comment
x86/setup: Move duplicate boot_cpu_data definition out of the ifdeffery
x86/boot/e820: Fix typo in e820.c comment

show more ...