Merge tag 'v6.6.9' into dev-6.6

This is the 6.6.9 stable release

x86/smpboot/64: Handle X2APIC BIOS inconsistency gracefully

commit 69a7386c1ec25476a0c78ffeb59de08a2a08f495 upstream.

Chris reported that a Dell PowerEdge T340 system stopped to boot when upgrading

x86/smpboot/64: Handle X2APIC BIOS inconsistency gracefully

commit 69a7386c1ec25476a0c78ffeb59de08a2a08f495 upstream.

Chris reported that a Dell PowerEdge T340 system stopped to boot when upgrading
to a kernel which contains the parallel hotplug changes. Disabling parallel
hotplug on the kernel command line makes it boot again.

It turns out that the Dell BIOS has x2APIC enabled and the boot CPU comes up in
X2APIC mode, but the APs come up inconsistently in xAPIC mode.

Parallel hotplug requires that the upcoming CPU reads out its APIC ID from the
local APIC in order to map it to the Linux CPU number.

In this particular case the readout on the APs uses the MMIO mapped registers
because the BIOS failed to enable x2APIC mode. That readout results in a page
fault because the kernel does not have the APIC MMIO space mapped when X2APIC
mode was enabled by the BIOS on the boot CPU and the kernel switched to X2APIC
mode early. That page fault can't be handled on the upcoming CPU that early and
results in a silent boot failure.

If parallel hotplug is disabled the system boots because in that case the APIC
ID read is not required as the Linux CPU number is provided to the AP in the
smpboot control word. When the kernel uses x2APIC mode then the APs are
switched to x2APIC mode too slightly later in the bringup process, but there is
no reason to do it that late.

Cure the BIOS bogosity by checking in the parallel bootup path whether the
kernel uses x2APIC mode and if so switching over the APs to x2APIC mode before
the APIC ID readout.

Fixes: 0c7ffa32dbd6 ("x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it")
Reported-by: Chris Lindee <chris.lindee@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Chris Lindee <chris.lindee@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/CA%2B2tU59853R49EaU_tyvOZuOTDdcU0RshGyydccp9R1NX9bEeQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'x86_boot_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 boot updates from Borislav Petkov:
"Avoid the baremetal decompressor code when booting on an EFI

Merge tag 'x86_boot_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 boot updates from Borislav Petkov:
"Avoid the baremetal decompressor code when booting on an EFI machine.

This is mandated by the current tightening of EFI executables
requirements when used in a secure boot scenario. More specifically,
an EFI executable cannot have a single section with RWX permissions,
which conflicts with the in-place kernel decompression that is done
today.

Instead, the things required by the booting kernel image are done in
the EFI stub now.

Work by Ard Biesheuvel"

* tag 'x86_boot_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/efistub: Avoid legacy decompressor when doing EFI boot
x86/efistub: Perform SNP feature test while running in the firmware
efi/libstub: Add limit argument to efi_random_alloc()
x86/decompressor: Factor out kernel decompression and relocation
x86/decompressor: Move global symbol references to C code
decompress: Use 8 byte alignment
x86/efistub: Prefer EFI memory attributes protocol over DXE services
x86/efistub: Perform 4/5 level paging switch from the stub
x86/decompressor: Merge trampoline cleanup with switching code
x86/decompressor: Pass pgtable address to trampoline directly
x86/decompressor: Only call the trampoline when changing paging levels
x86/decompressor: Call trampoline directly from C code
x86/decompressor: Avoid the need for a stack in the 32-bit trampoline
x86/decompressor: Use standard calling convention for trampoline
x86/decompressor: Call trampoline as a normal function
x86/decompressor: Assign paging related global variables earlier
x86/decompressor: Store boot_params pointer in callee save register
x86/efistub: Clear BSS in EFI handover protocol entrypoint
x86/decompressor: Avoid magic offsets for EFI handover entrypoint
x86/efistub: Simplify and clean up handover entry code
...

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

x86/head_64: Store boot_params pointer in callee save register

Instead of pushing/popping %RSI to/from the stack every time a function
is called from startup_64(), store it in a callee preserved reg

x86/head_64: Store boot_params pointer in callee save register

Instead of pushing/popping %RSI to/from the stack every time a function
is called from startup_64(), store it in a callee preserved register
and grab it from there when its value is actually needed.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-3-ardb@kernel.org

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge branch 'master' into mm-hotfixes-stable

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge tag 'v6.4' into rdma.git for-next

Linux 6.4

Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:

drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622

Merge tag 'v6.4' into rdma.git for-next

Linux 6.4

Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:

drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622115246.365d30ad@canb.auug.org.au

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:

- Parallel CPU bringup

Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:

- Parallel CPU bringup

The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.

The current fully serialized bringup does the following per AP:

1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state

There are two significant delays:

#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.

#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.

On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.

This can be reduced significantly by splitting the bringup
mechanism into two parts:

1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.

The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)

2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.

Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.

If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.

The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.

For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.

- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"

* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...

show more ...

Add Renesas PMIC RAA215300 and built-in RTC

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this

Add Renesas PMIC RAA215300 and built-in RTC

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.

The details of PMIC can be found here[1].

Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Rem

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <airlied@redhat.c

Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <airlied@redhat.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

include/linux/mlx5/driver.h
617f5db1a626 ("RDMA/mlx5: Fix affinity ass

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

include/linux/mlx5/driver.h
617f5db1a626 ("RDMA/mlx5: Fix affinity assignment")
dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/

tools/testing/selftests/net/mptcp/mptcp_join.sh
47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")
45b1a1227a7a ("mptcp: introduces more address related mibs")
0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

regmap: Merge up v6.4-rc6

The fix for maple tree RCU locking on sync is a dependency for the
block sync code for the maple tree.

Merge tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:

- Set up the kernel CS earlier in the boot process in case EFI boots

Merge tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:

- Set up the kernel CS earlier in the boot process in case EFI boots
the kernel after bypassing the decompressor and the CS descriptor
used ends up being the EFI one which is not mapped in the identity
page table, leading to early SEV/SNP guest communication exceptions
resulting in the guest crashing

* tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed

show more ...