Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part o

Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).

CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.

The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.

For more information, refer to the links below for the earlier
versions of this patch set"

Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/

* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...

show more ...

x86/ibt: Convert IBT selftest to asm

The following warning is reported when frame pointers and kernel IBT are
enabled:

vmlinux.o: warning: objtool: ibt_selftest+0x11: sibling call from callable i

x86/ibt: Convert IBT selftest to asm

The following warning is reported when frame pointers and kernel IBT are
enabled:

vmlinux.o: warning: objtool: ibt_selftest+0x11: sibling call from callable instruction with modified stack frame

The problem is that objtool interprets the indirect branch in
ibt_selftest() as a sibling call, and GCC inserts a (partial) frame
pointer prologue before it:

0000 000000000003f550 <ibt_selftest>:
0000 3f550: f3 0f 1e fa endbr64
0004 3f554: e8 00 00 00 00 call 3f559 <ibt_selftest+0x9> 3f555: R_X86_64_PLT32 __fentry__-0x4
0009 3f559: 55 push %rbp
000a 3f55a: 48 8d 05 02 00 00 00 lea 0x2(%rip),%rax # 3f563 <ibt_selftest_ip>
0011 3f561: ff e0 jmp *%rax

Note the inline asm is missing ASM_CALL_CONSTRAINT, so the 'push %rbp'
happens before the indirect branch and the 'mov %rsp, %rbp' happens
afterwards.

Simplify the generated code and make it easier to understand for both
tools and humans by moving the selftest to proper asm.

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/99a7e16b97bda97bf0a04aa141d6241cd8a839a2.1680912949.git.jpoimboe@kernel.org

show more ...

x86/shstk: Add user control-protection fault handler

A control-protection fault is triggered when a control-flow transfer
attempt violates Shadow Stack or Indirect Branch Tracking constraints.
For e

x86/shstk: Add user control-protection fault handler

A control-protection fault is triggered when a control-flow transfer
attempt violates Shadow Stack or Indirect Branch Tracking constraints.
For example, the return address for a RET instruction differs from the copy
on the shadow stack.

There already exists a control-protection fault handler for handling kernel
IBT faults. Refactor this fault handler into separate user and kernel
handlers, like the page fault handler. Add a control-protection handler
for usermode. To avoid ifdeffery, put them both in a new file cet.c, which
is compiled in the case of either of the two CET features supported in the
kernel: kernel IBT or user mode shadow stack. Move some static inline
functions from traps.c into a header so they can be used in cet.c.

Opportunistically fix a comment in the kernel IBT part of the fault
handler that is on the end of the line instead of preceding it.

Keep the same behavior for the kernel side of the fault handler, except for
converting a BUG to a WARN in the case of a #CP happening when the feature
is missing. This unifies the behavior with the new shadow stack code, and
also prevents the kernel from crashing under this situation which is
potentially recoverable.

The control-protection fault handler works in a similar way as the general
protection fault handler. It provides the si_code SEGV_CPERR to the signal
handler.

Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-28-rick.p.edgecombe%40intel.com

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signe

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAIN

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAINTAINERS entry

show more ...

Merge v5.19-rc1 into drm-misc-fixes

Let's kick-off the start of the 5.19 fix cycle

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.19-rc1' into asoc-5.19

Linux 5.19-rc1

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge tag 'x86_asm_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 asm updates from Borislav Petkov:

- A bunch of changes towards streamlining low level asm helper

Merge tag 'x86_asm_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 asm updates from Borislav Petkov:

- A bunch of changes towards streamlining low level asm helpers'
calling conventions so that former can be converted to C eventually

- Simplify PUSH_AND_CLEAR_REGS so that it can be used at the system
call entry paths instead of having opencoded, slightly different
variants of it everywhere

- Misc other fixes

* tag 'x86_asm_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix register corruption in compat syscall
objtool: Fix STACK_FRAME_NON_STANDARD reloc type
linkage: Fix issue with missing symbol size
x86/entry: Remove skip_r11rcx
x86/entry: Use PUSH_AND_CLEAR_REGS for compat
x86/entry: Simplify entry_INT80_compat()
x86/mm: Simplify RESERVE_BRK()
x86/entry: Convert SWAPGS to swapgs and remove the definition of SWAPGS
x86/entry: Don't call error_entry() for XENPV
x86/entry: Move CLD to the start of the idtentry macro
x86/entry: Move PUSH_AND_CLEAR_REGS out of error_entry()
x86/entry: Switch the stack after error_entry() returns
x86/traps: Use pt_regs directly in fixup_bad_iret()

show more ...

x86/traps: Use pt_regs directly in fixup_bad_iret()

Always stash the address error_entry() is going to return to, in %r12
and get rid of the void *error_entry_ret; slot in struct bad_iret_stack
whic

x86/traps: Use pt_regs directly in fixup_bad_iret()

Always stash the address error_entry() is going to return to, in %r12
and get rid of the void *error_entry_ret; slot in struct bad_iret_stack
which was supposed to account for it and pt_regs pushed on the stack.

After this, both fixup_bad_iret() and sync_regs() can work on a struct
pt_regs pointer directly.

[ bp: Rewrite commit message, touch ups. ]

Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220503032107.680190-2-jiangshanlai@gmail.com

show more ...

Merge branch 'topic/cs35l41' into for-next

Pull CS35L41 codec updates

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>