Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'x86_boot_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 boot updates from Borislav Petkov:
"Avoid the baremetal decompressor code when booting on an EFI

Merge tag 'x86_boot_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 boot updates from Borislav Petkov:
"Avoid the baremetal decompressor code when booting on an EFI machine.

This is mandated by the current tightening of EFI executables
requirements when used in a secure boot scenario. More specifically,
an EFI executable cannot have a single section with RWX permissions,
which conflicts with the in-place kernel decompression that is done
today.

Instead, the things required by the booting kernel image are done in
the EFI stub now.

Work by Ard Biesheuvel"

* tag 'x86_boot_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/efistub: Avoid legacy decompressor when doing EFI boot
x86/efistub: Perform SNP feature test while running in the firmware
efi/libstub: Add limit argument to efi_random_alloc()
x86/decompressor: Factor out kernel decompression and relocation
x86/decompressor: Move global symbol references to C code
decompress: Use 8 byte alignment
x86/efistub: Prefer EFI memory attributes protocol over DXE services
x86/efistub: Perform 4/5 level paging switch from the stub
x86/decompressor: Merge trampoline cleanup with switching code
x86/decompressor: Pass pgtable address to trampoline directly
x86/decompressor: Only call the trampoline when changing paging levels
x86/decompressor: Call trampoline directly from C code
x86/decompressor: Avoid the need for a stack in the 32-bit trampoline
x86/decompressor: Use standard calling convention for trampoline
x86/decompressor: Call trampoline as a normal function
x86/decompressor: Assign paging related global variables earlier
x86/decompressor: Store boot_params pointer in callee save register
x86/efistub: Clear BSS in EFI handover protocol entrypoint
x86/decompressor: Avoid magic offsets for EFI handover entrypoint
x86/efistub: Simplify and clean up handover entry code
...

show more ...

x86/decompressor: Pass pgtable address to trampoline directly

The only remaining use of the trampoline address by the trampoline
itself is deriving the page table address from it, and this involves

x86/decompressor: Pass pgtable address to trampoline directly

The only remaining use of the trampoline address by the trampoline
itself is deriving the page table address from it, and this involves
adding an offset of 0x0. So simplify this, and pass the new CR3 value
directly.

This makes the fact that the page table happens to be at the start of
the trampoline allocation an implementation detail of the caller.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-15-ardb@kernel.org

show more ...

x86/decompressor: Avoid the need for a stack in the 32-bit trampoline

The 32-bit trampoline no longer uses the stack for anything except
performing a far return back to long mode, and preserving the

x86/decompressor: Avoid the need for a stack in the 32-bit trampoline

The 32-bit trampoline no longer uses the stack for anything except
performing a far return back to long mode, and preserving the caller's
stack pointer value. Currently, the trampoline stack is placed in the
same page that carries the trampoline code, which means this page must
be mapped writable and executable, and the stack is therefore executable
as well.

Replace the far return with a far jump, so that the return address can
be pre-calculated and patched into the code before it is called. This
removes the need for a 32-bit addressable stack entirely, and in a later
patch, this will be taken advantage of by removing writable permissions
from (and adding executable permissions to) the trampoline code page
when booting via the EFI stub.

Note that the value of RSP still needs to be preserved explicitly across
the switch into 32-bit mode, as the register may get truncated to 32
bits.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-12-ardb@kernel.org

show more ...

x86/decompressor: Use standard calling convention for trampoline

Update the trampoline code so its arguments are passed via RDI and RSI,
which matches the ordinary SysV calling convention for x86_64

x86/decompressor: Use standard calling convention for trampoline

Update the trampoline code so its arguments are passed via RDI and RSI,
which matches the ordinary SysV calling convention for x86_64. This will
allow this code to be called directly from C.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-11-ardb@kernel.org

show more ...

x86/decompressor: Call trampoline as a normal function

Move the long return to switch to 32-bit mode into the trampoline code
so it can be called as an ordinary function. This will allow it to be
ca

x86/decompressor: Call trampoline as a normal function

Move the long return to switch to 32-bit mode into the trampoline code
so it can be called as an ordinary function. This will allow it to be
called directly from C code in a subsequent patch.

While at it, reorganize the code somewhat to keep the prologue and
epilogue of the function together, making the code a bit easier to
follow. Also, given that the trampoline is now entered in 64-bit mode, a
simple RIP-relative reference can be used to take the address of the
exit point.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20230807162720.545787-10-ardb@kernel.org

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signe

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAIN

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAINTAINERS entry

show more ...

Merge v5.19-rc1 into drm-misc-fixes

Let's kick-off the start of the 5.19 fix cycle

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.19-rc1' into asoc-5.19

Linux 5.19-rc1

Merge tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull Intel TDX support from Borislav Petkov:
"Intel Trust Domain Extensions (TDX) support.

This is the

Merge tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull Intel TDX support from Borislav Petkov:
"Intel Trust Domain Extensions (TDX) support.

This is the Intel version of a confidential computing solution called
Trust Domain Extensions (TDX). This series adds support to run the
kernel as part of a TDX guest. It provides similar guest protections
to AMD's SEV-SNP like guest memory and register state encryption,
memory integrity protection and a lot more.

Design-wise, it differs from AMD's solution considerably: it uses a
software module which runs in a special CPU mode called (Secure
Arbitration Mode) SEAM. As the name suggests, this module serves as
sort of an arbiter which the confidential guest calls for services it
needs during its lifetime.

Just like AMD's SNP set, this series reworks and streamlines certain
parts of x86 arch code so that this feature can be properly
accomodated"

* tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
x86/tdx: Fix RETs in TDX asm
x86/tdx: Annotate a noreturn function
x86/mm: Fix spacing within memory encryption features message
x86/kaslr: Fix build warning in KASLR code in boot stub
Documentation/x86: Document TDX kernel architecture
ACPICA: Avoid cache flush inside virtual machines
x86/tdx/ioapic: Add shared bit for IOAPIC base address
x86/mm: Make DMA memory shared for TD guest
x86/mm/cpa: Add support for TDX shared memory
x86/tdx: Make pages shared in ioremap()
x86/topology: Disable CPU online/offline control for TDX guests
x86/boot: Avoid #VE during boot for TDX platforms
x86/boot: Set CR0.NE early and keep it set during the boot
x86/acpi/x86/boot: Add multiprocessor wake-up support
x86/boot: Add a trampoline for booting APs via firmware handoff
x86/tdx: Wire up KVM hypercalls
x86/tdx: Port I/O: Add early boot support
x86/tdx: Port I/O: Add runtime hypercalls
x86/boot: Port I/O: Add decompression-time support for TDX
x86/boot: Port I/O: Allow to hook up alternative helpers
...

show more ...

x86/boot: Avoid #VE during boot for TDX platforms

There are a few MSRs and control register bits that the kernel
normally needs to modify during boot. But, TDX disallows
modification of these regist

x86/boot: Avoid #VE during boot for TDX platforms

There are a few MSRs and control register bits that the kernel
normally needs to modify during boot. But, TDX disallows
modification of these registers to help provide consistent security
guarantees. Fortunately, TDX ensures that these are all in the correct
state before the kernel loads, which means the kernel does not need to
modify them.

The conditions to avoid are:

* Any writes to the EFER MSR
* Clearing CR4.MCE

This theoretically makes the guest boot more fragile. If, for instance,
EFER was set up incorrectly and a WRMSR was performed, it will trigger
early exception panic or a triple fault, if it's before early
exceptions are set up. However, this is likely to trip up the guest
BIOS long before control reaches the kernel. In any case, these kinds
of problems are unlikely to occur in production environments, and
developers have good debug tools to fix them quickly.

Change the common boot code to work on TDX and non-TDX systems.
This should have no functional effect on non-TDX systems.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-24-kirill.shutemov@linux.intel.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.3 merge window.

Merge tag 'v5.1' into next

Sync up with mainline to bring in the latest APIs.

Merge tag 'drm-intel-next-2019-04-04' into gvt-next

Merge back drm-intel-next for engine name definition refinement
and 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
tha

Merge tag 'drm-intel-next-2019-04-04' into gvt-next

Merge back drm-intel-next for engine name definition refinement
and 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
that would need gvt fixes to depend on.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

show more ...

Merge tag 'v5.1-rc2' into next-general

Merge to Linux 5.1-rc2 for subsystems to work with.