Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Resource management:

- Add pci_dev_for_each_resource() and pci_bus_fo

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Resource management:

- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators

PCIe native device hotplug:

- Fix AB-BA deadlock between reset_lock and device_lock

Power management:

- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices

- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset

Error handling:

- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native

ASPM:

- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0

Freescale i.MX6 PCIe controller driver:

- Install imprecise external abort handler only when DT indicates
PCIe support

Freescale Layerscape PCIe controller driver:

- Add ls1028a endpoint mode support

Qualcomm PCIe controller driver:

- Add SM8550 DT binding and driver support

- Add SDX55 DT binding and driver support

- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3

- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0

- Add DT "mhi" register region for supported SoCs

- Expose link transition counts via debugfs to help debug low power
issues

- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices

- Enable async probe by default to reduce boot time

Miscellaneous:

- Sort controller Kconfig entries by vendor"

* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...

show more ...

Merge branch 'pci/controller/kconfig'

- Use uniform language in Kconfig menu entries (Bjorn Helgaas)

- Sort controller Kconfig entries by vendor (Bjorn Helgaas)

* pci/controller/kconfig:
PCI: xi

Merge branch 'pci/controller/kconfig'

- Use uniform language in Kconfig menu entries (Bjorn Helgaas)

- Sort controller Kconfig entries by vendor (Bjorn Helgaas)

* pci/controller/kconfig:
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
PCI/PM: Increase wait time after resume
PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock
PCI: Fix up L1SS capability for Intel Apollo Lake Root Port
PCI: qcom: Expose link transition counts via debugfs
dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs
PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version
PCI: qcom: Use macros for defining total no. of clocks & supplies
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0
PCI: qcom: Use lower case for hex
PCI: qcom: Add missing macros for register fields
PCI: qcom: Use bitfield definitions for register fields
PCI: qcom: Sort and group registers and bitfield definitions
PCI: qcom: Remove PCIE20_ prefix from register definitions
PCI: qcom: Fix the incorrect register usage in v2.7.0 config
PCI/EDR: Add edr_handle_event() comments
PCI/EDR: Clear Device Status after EDR error recovery
efi/cper: Remove unnecessary aer.h include
dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema
PCI/P2PDMA: Fix pci_p2pmem_find_many() kernel-doc
EISA: Drop unused pci_bus_for_each_resource() index argument
PCI: Make pci_bus_for_each_resource() index optional
PCI: Document pci_bus_for_each_resource()
PCI: Introduce pci_dev_for_each_resource()
PCI: Introduce pci_resource_n()
PCI: ixp4xx: Use PCI_CONF1_ADDRESS() macro
PCI: mt7621: Use dev_info() to log PCIe card detection
PCI: imx6: Install the fault handler only on compatible match
PCI: layerscape: Add EP mode support for ls1028a
PCI: rcar: Avoid defines prefixed with CONFIG
dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema
PCI: kirin: Select REGMAP_MMIO

show more ...

Merge branch 'pci/resource'

- Add pci_dev_for_each_resource() and pci_bus_for_each_resource() iterators
to simplify loops (Andy Shevchenko)

* pci/resource:
EISA: Drop unused pci_bus_for_each_re

Merge branch 'pci/resource'

- Add pci_dev_for_each_resource() and pci_bus_for_each_resource() iterators
to simplify loops (Andy Shevchenko)

* pci/resource:
EISA: Drop unused pci_bus_for_each_resource() index argument
PCI: Make pci_bus_for_each_resource() index optional
PCI: Document pci_bus_for_each_resource()
PCI: Introduce pci_dev_for_each_resource()
PCI: Introduce pci_resource_n()

show more ...

PCI: Introduce pci_dev_for_each_resource()

Instead of open-coding it everywhere introduce a tiny helper that can be
used to iterate over each resource of a PCI device, and convert the most
obvious u

PCI: Introduce pci_dev_for_each_resource()

Instead of open-coding it everywhere introduce a tiny helper that can be
used to iterate over each resource of a PCI device, and convert the most
obvious users into it.

While at it drop doubled empty line before pdev_sort_resources().

No functional changes intended.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230330162434.35055-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>

show more ...

Merge tag 'v4.20' into for-linus

Sync with mainline to get linux/overflow.h among other things.

Merge tag 'v4.20' into next

Merge with mainline to bring in the new APIs.

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'v4.18-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.18-rc2

Merge tag 'v4.18-rc2' into next-general

Merge to Linux 4.18-rc2 for security subsystem developers.

Merge branch 'linus' into x86/urgent

Required to queue a dependent fix.

Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

- unify AER decoding for native and ACPI CPER sources (Alexandru

Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

- unify AER decoding for native and ACPI CPER sources (Alexandru
Gagniuc)

- add TLP header info to AER tracepoint (Thomas Tai)

- add generic pcie_wait_for_link() interface (Oza Pawandeep)

- handle AER ERR_FATAL by removing and re-enumerating devices, as
Downstream Port Containment does (Oza Pawandeep)

- factor out common code between AER and DPC recovery (Oza Pawandeep)

- stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep)

- share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep)

- disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)

- respect platform ownership of LTR (Bjorn Helgaas)

- clear interrupt status in top half to avoid interrupt storm (Oza
Pawandeep)

- neaten pci=earlydump output (Andy Shevchenko)

- avoid errors when extended config space inaccessible (Gilles Buloz)

- prevent sysfs disable of device while driver attached (Christoph
Hellwig)

- use core interface to report PCIe link properties in bnx2x, bnxt_en,
cxgb4, ixgbe (Bjorn Helgaas)

- remove unused pcie_get_minimum_link() (Bjorn Helgaas)

- fix use-before-set error in ibmphp (Dan Carpenter)

- fix pciehp timeouts caused by Command Completed errata (Bjorn
Helgaas)

- fix refcounting in pnv_php hotplug (Julia Lawall)

- clear pciehp Presence Detect and Data Link Layer Status Changed on
resume so we don't miss hotplug events (Mika Westerberg)

- only request pciehp control if we support it, so platform can use
ACPI hotplug otherwise (Mika Westerberg)

- convert SHPC to be builtin only (Mika Westerberg)

- request SHPC control via _OSC if we support it (Mika Westerberg)

- simplify SHPC handoff from firmware (Mika Westerberg)

- fix an SHPC quirk that mistakenly included *all* AMD bridges as well
as devices from any vendor with device ID 0x7458 (Bjorn Helgaas)

- assign a bus number even to non-native hotplug bridges to leave
space for acpiphp additions, to fix a common Thunderbolt xHCI
hot-add failure (Mika Westerberg)

- keep acpiphp from scanning native hotplug bridges, to fix common
Thunderbolt hot-add failures (Mika Westerberg)

- improve "partially hidden behind bridge" messages from core (Mika
Westerberg)

- add macros for PCIe Link Control 2 register (Frederick Lawler)

- replace IB/hfi1 custom macros with PCI core versions (Frederick
Lawler)

- remove dead microblaze and xtensa code (Bjorn Helgaas)

- use dev_printk() when possible in xtensa and mips (Bjorn Helgaas)

- remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn
Helgaas)

- add managed interface to get PCI host bridge resources from OF (Jan
Kiszka)

- add support for unbinding generic PCI host controller (Jan Kiszka)

- fix memory leaks when unbinding generic PCI host controller (Jan
Kiszka)

- request legacy VGA framebuffer only for VGA devices to avoid false
device conflicts (Bjorn Helgaas)

- turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device()
like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)

- add generic enable function for simple SR-IOV hardware (Alexander
Duyck)

- use generic SR-IOV enable for ena, nvme (Alexander Duyck)

- add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)

- add ACS quirk for Intel 300 series (Mika Westerberg)

- enable register clock for Armada 7K/8K (Gregory CLEMENT)

- reduce Keystone "link already up" log level (Fabio Estevam)

- move private DT functions to drivers/pci/ (Rob Herring)

- factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)

- add DesignWare support to the endpoint test driver (Gustavo
Pimentel)

- add DesignWare support for endpoint mode (Gustavo Pimentel)

- use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
artpec6 (Gustavo Pimentel)

- fix Qualcomm bitwise NOT issue (Dan Carpenter)

- add Qualcomm runtime PM support (Srinivas Kandagatla)

- fix DesignWare enumeration below bridges (Koen Vandeputte)

- use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)

- add configfs entries for pci_epf_driver device IDs (Kishon Vijay
Abraham I)

- clean up pci_endpoint_test driver (Gustavo Pimentel)

- update Layerscape maintainer email addresses (Minghuan Lian)

- add COMPILE_TEST to improve build test coverage (Rob Herring)

- fix Hyper-V bus registration failure caused by domain/serial number
confusion (Sridhar Pitchai)

- improve Hyper-V refcounting and coding style (Stephen Hemminger)

- avoid potential Hyper-V hang waiting for a response that will never
come (Dexuan Cui)

- implement Mediatek chained IRQ handling (Honghui Zhang)

- fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)

- add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)

- add Mobiveil MSI support (Subrahmanya Lingappa)

- clean up clocks, MSI, IRQ mappings in R-Car probe failure paths
(Marek Vasut)

- poll more frequently (5us vs 5ms) while waiting for R-Car data link
active (Marek Vasut)

- use generic OF parsing interface in R-Car (Vladimir Zapolskiy)

- add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)

- add R-Car gen3 PHY support (Sergei Shtylyov)

- improve R-Car PHYRDY polling (Sergei Shtylyov)

- clean up R-Car macros (Marek Vasut)

- use runtime PM for R-Car controller clock (Dien Pham)

- update arm64 defconfig for Rockchip (Shawn Lin)

- refactor Rockchip code to facilitate both root port and endpoint
mode (Shawn Lin)

- add Rockchip endpoint mode driver (Shawn Lin)

- support VMD "membar shadow" feature (Jon Derrick)

- support VMD bus number offsets (Jon Derrick)

- add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)

- remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
selections (Bjorn Helgaas)

- clean up quirks.c organization and whitespace (Bjorn Helgaas)

* tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits)
PCI/AER: Replace struct pcie_device with pci_dev
PCI/AER: Remove unused parameters
PCI: qcom: Include gpio/consumer.h
PCI: Improve "partially hidden behind bridge" log message
PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
PCI: Move resource distribution for single bridge outside loop
PCI: Account for all bridges on bus when distributing bus numbers
ACPI / hotplug / PCI: Drop unnecessary parentheses
ACPI / hotplug / PCI: Mark stale PCI devices disconnected
ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
PCI: hotplug: Add hotplug_is_native()
PCI: shpchp: Add shpchp_is_native()
PCI: shpchp: Fix AMD POGO identification
PCI: mobiveil: Add MSI support
PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
PCI/AER: Decode Error Source Requester ID
PCI/AER: Remove aer_recover_work_func() forward declaration
PCI/DPC: Use the generic pcie_do_fatal_recovery() path
PCI/AER: Pass service type to pcie_do_fatal_recovery()
PCI/DPC: Disable ERR_NONFATAL handling by DPC
...

show more ...

Merge branch 'pci/sparc'

- request legacy VGA framebuffer only for VGA devices to avoid false
device conflicts (Bjorn Helgaas)

- turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_de

Merge branch 'pci/sparc'

- request legacy VGA framebuffer only for VGA devices to avoid false
device conflicts (Bjorn Helgaas)

- turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like
everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)

* pci/sparc:
sparc/PCI: Use dev_printk() when possible
sparc32/PCI/PCIC: Converge device enable path
sparc32/PCI/LEON: Converge device enable path
sparc/PCI: Request legacy VGA framebuffer only for VGA devices

show more ...

sparc/PCI: Use dev_printk() when possible

Use the pci_info() and pci_err() wrappers for dev_printk() when possible.

Log PCI device vendor and device IDs and BAR information in the same format
used

sparc/PCI: Use dev_printk() when possible

Use the pci_info() and pci_err() wrappers for dev_printk() when possible.

Log PCI device vendor and device IDs and BAR information in the same format
used by other architectures.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

show more ...

sparc32/PCI/PCIC: Converge device enable path

Most architectures turn on PCI_COMMAND_IO and PCI_COMMAND_MEMORY in
pci_enable_device() when a driver claims the device. Sparc PCIC did it in
pcibios_f

sparc32/PCI/PCIC: Converge device enable path

Most architectures turn on PCI_COMMAND_IO and PCI_COMMAND_MEMORY in
pci_enable_device() when a driver claims the device. Sparc PCIC did it in
pcibios_fixup_bus(), which is called during enumeration, before any drivers
are attached.

Implement pcibios_enable_device() for PCIC so it will do the same as other
architectures. This implementation is copied verbatim from sparc64.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

show more ...

Merge branch 'fix/intel' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel

Merge tag 'v4.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.15-rc5