Merge tag 'v6.6.39' into dev-6.6

This is the 6.6.39 stable release

KVM: s390: fix LPSWEY handling

[ Upstream commit 4c6abb7f7b349f00c0f7ed5045bf67759c012892 ]

in rare cases, e.g. for injecting a machine check we do intercept all
load PSW instructions via ICTL_LPSW

KVM: s390: fix LPSWEY handling

[ Upstream commit 4c6abb7f7b349f00c0f7ed5045bf67759c012892 ]

in rare cases, e.g. for injecting a machine check we do intercept all
load PSW instructions via ICTL_LPSW. With facility 193 a new variant
LPSWEY was added. KVM needs to handle that as well.

Fixes: a3efa8429266 ("KVM: s390: gen_facilities: allow facilities 165, 193, 194 and 196")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20240628163547.2314-1-borntraeger@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.33' into dev-6.6

This is the 6.6.33 stable release

s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests

[ Upstream commit 06201e00ee3e4beacac48aab2b83eff64ebf0bc0 ]

commit fa41ba0d08de ("s390/mm: avoid empty zero pages for KVM guest

s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests

[ Upstream commit 06201e00ee3e4beacac48aab2b83eff64ebf0bc0 ]

commit fa41ba0d08de ("s390/mm: avoid empty zero pages for KVM guests to
avoid postcopy hangs") introduced an undesired side effect when combined
with memory ballooning and VM migration: memory part of the inflated
memory balloon will consume memory.

Assuming we have a 100GiB VM and inflated the balloon to 40GiB. Our VM
will consume ~60GiB of memory. If we now trigger a VM migration,
hypervisors like QEMU will read all VM memory. As s390x does not support
the shared zeropage, we'll end up allocating for all previously-inflated
memory part of the memory balloon: 50 GiB. So we might easily
(unexpectedly) crash the VM on the migration source.

Even worse, hypervisors like QEMU optimize for zeropage migration to not
consume memory on the migration destination: when migrating a
"page full of zeroes", on the migration destination they check whether the
target memory is already zero (by reading the destination memory) and avoid
writing to the memory to not allocate memory: however, s390x will also
allocate memory here, implying that also on the migration destination, we
will end up allocating all previously-inflated memory part of the memory
balloon.

This is especially bad if actual memory overcommit was not desired, when
memory ballooning is used for dynamic VM memory resizing, setting aside
some memory during boot that can be added later on demand. Alternatives
like virtio-mem that would avoid this issue are not yet available on
s390x.

There could be ways to optimize some cases in user space: before reading
memory in an anonymous private mapping on the migration source, check via
/proc/self/pagemap if anything is already populated. Similarly check on
the migration destination before reading. While that would avoid
populating tables full of shared zeropages on all architectures, it's
harder to get right and performant, and requires user space changes.

Further, with posctopy live migration we must place a page, so there,
"avoid touching memory to avoid allocating memory" is not really
possible. (Note that a previously we would have falsely inserted
shared zeropages into processes using UFFDIO_ZEROPAGE where
mm_forbids_zeropage() would have actually forbidden it)

PV is currently incompatible with memory ballooning, and in the common
case, KVM guests don't make use of storage keys. Instead of zapping
zeropages when enabling storage keys / PV, that turned out to be
problematic in the past, let's do exactly the same we do with KSM pages:
trigger unsharing faults to replace the shared zeropages by proper
anonymous folios.

What about added latency when enabling storage kes? Having a lot of
zeropages in applicable environments (PV, legacy guests, unittests) is
unexpected. Further, KSM could today already unshare the zeropages
and unmerging KSM pages when enabling storage kets would unshare the
KSM-placed zeropages in the same way, resulting in the same latency.

[ agordeev: Fixed sparse and checkpatch complaints and error handling ]

Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: fa41ba0d08de ("s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240411161441.910170-3-david@redhat.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.22' into dev-6.6

Linux 6.6.22

KVM: s390: add stat counter for shadow gmap events

[ Upstream commit c3235e2dd6956448a562d6b1112205eeebc8ab43 ]

The shadow gmap tracks memory of nested guests (guest-3). In certain
scenarios, the s

KVM: s390: add stat counter for shadow gmap events

[ Upstream commit c3235e2dd6956448a562d6b1112205eeebc8ab43 ]

The shadow gmap tracks memory of nested guests (guest-3). In certain
scenarios, the shadow gmap needs to be rebuilt, which is a costly operation
since it involves a SIE exit into guest-1 for every entry in the respective
shadow level.

Add kvm stat counters when new shadow structures are created at various
levels. Also add a counter gmap_shadow_create when a completely fresh
shadow gmap is created as well as a counter gmap_shadow_reuse when an
existing gmap is being reused.

Note that when several levels are shadowed at once, counters on all
affected levels will be increased.

Also note that not all page table levels need to be present and a ASCE
can directly point to e.g. a segment table. In this case, a new segment
table will always be equivalent to a new shadow gmap and hence will be
counted as gmap_shadow_create and not as gmap_shadow_segment.

Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20231009093304.2555344-2-nrb@linux.ibm.com
Message-Id: <20231009093304.2555344-2-nrb@linux.ibm.com>
Stable-dep-of: fe752331d4b3 ("KVM: s390: vsie: fix race during shadow creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.16' into dev-6.6

This is the 6.6.16 stable release

KVM: s390: fix setting of fpc register

[ Upstream commit b988b1bb0053c0dcd26187d29ef07566a565cf55 ]

kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control
(fpc) register of a guest

KVM: s390: fix setting of fpc register

[ Upstream commit b988b1bb0053c0dcd26187d29ef07566a565cf55 ]

kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control
(fpc) register of a guest cpu. The new value is tested for validity by
temporarily loading it into the fpc register.

This may lead to corruption of the fpc register of the host process:
if an interrupt happens while the value is temporarily loaded into the fpc
register, and within interrupt context floating point or vector registers
are used, the current fp/vx registers are saved with save_fpu_regs()
assuming they belong to user space and will be loaded into fp/vx registers
when returning to user space.

test_fp_ctl() restores the original user space / host process fpc register
value, however it will be discarded, when returning to user space.

In result the host process will incorrectly continue to run with the value
that was supposed to be used for a guest cpu.

Fix this by simply removing the test. There is another test right before
the SIE context is entered which will handles invalid values.

This results in a change of behaviour: invalid values will now be accepted
instead of that the ioctl fails with -EINVAL. This seems to be acceptable,
given that this interface is most likely not used anymore, and this is in
addition the same behaviour implemented with the memory mapped interface
(replace invalid values with zero) - see sync_regs() in kvm-s390.c.

Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM:

- Clean up vCPU targets, always returning generic v8 as the preferred
target

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM:

- Clean up vCPU targets, always returning generic v8 as the preferred
target

- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)

- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.

- Fix vPMU issues related to handling of PMUver.

- Don't unnecessary align non-stack allocations in the EL2 VA space

- Drop HCR_VIRT_EXCP_MASK, which was never used...

- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead

- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

- Remove prototypes without implementations

RISC-V:

- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

- Added ONE_REG interface for SATP mode

- Added ONE_REG interface to enable/disable multiple ISA extensions

- Improved error codes returned by ONE_REG interfaces

- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

- Added get-reg-list selftest for KVM RISC-V

s390:

- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.

- Guest debug fixes (Ilya)

x86:

- Clean up KVM's handling of Intel architectural events

- Intel bugfixes

- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs

- Clean up LBR virtualization code

- Fix a bug where KVM fails to set the target pCPU during an IRTE
update

- Fix fatal bugs in SEV-ES intrahost migration

- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)

- Retry APIC map recalculation if a vCPU is added/enabled

- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM

- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code

- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID

- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU

- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection

- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process

Generic:

- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.

- Drop unused function declarations

Selftests:

- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting

- Clean up the PMU event filter test and add new testcases

- Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...

show more ...

Merge tag 'kvm-s390-next-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to

Merge tag 'kvm-s390-next-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.

- Guest debug fixes (Ilya)

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

KVM: s390: Add UV feature negotiation

Add a uv_feature list for pv-guests to the KVM cpu-model.
The feature bits 'AP-interpretation for secure guests' and
'AP-interrupt for secure guests' are availa

KVM: s390: Add UV feature negotiation

Add a uv_feature list for pv-guests to the KVM cpu-model.
The feature bits 'AP-interpretation for secure guests' and
'AP-interrupt for secure guests' are available.

Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230815151415.379760-4-seiden@linux.ibm.com
Message-Id: <20230815151415.379760-4-seiden@linux.ibm.com>

show more ...

s390/uv: UV feature check utility

Introduces a function to check the existence of an UV feature.
Refactor feature bit checks to use the new function.

Signed-off-by: Steffen Eiden <seiden@linux.ibm.

s390/uv: UV feature check utility

Introduces a function to check the existence of an UV feature.
Refactor feature bit checks to use the new function.

Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Link: https://lore.kernel.org/r/20230815151415.379760-3-seiden@linux.ibm.com
Message-Id: <20230815151415.379760-3-seiden@linux.ibm.com>

show more ...

KVM: s390: interrupt: Fix single-stepping userspace-emulated instructions

Single-stepping a userspace-emulated instruction that generates an
interrupt causes GDB to land on the instruction following

KVM: s390: interrupt: Fix single-stepping userspace-emulated instructions

Single-stepping a userspace-emulated instruction that generates an
interrupt causes GDB to land on the instruction following it instead of
the respective interrupt handler.

The reason is that after arranging a KVM_EXIT_S390_SIEIC exit,
kvm_handle_sie_intercept() calls kvm_s390_handle_per_ifetch_icpt(),
which sets KVM_GUESTDBG_EXIT_PENDING. This bit, however, is not
processed immediately, but rather persists until the next ioctl(),
causing a spurious single-step exit.

Fix by clearing this bit in ioctl().

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20230725143857.228626-5-iii@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

show more ...

KVM: s390: interrupt: Fix single-stepping into interrupt handlers

After single-stepping an instruction that generates an interrupt, GDB
ends up on the second instruction of the respective interrupt

KVM: s390: interrupt: Fix single-stepping into interrupt handlers

After single-stepping an instruction that generates an interrupt, GDB
ends up on the second instruction of the respective interrupt handler.

The reason is that vcpu_pre_run() manually delivers the interrupt, and
then __vcpu_run() runs the first handler instruction using the
CPUSTAT_P flag. This causes a KVM_SINGLESTEP exit on the second handler
instruction.

Fix by delaying the KVM_SINGLESTEP exit until after the manual
interrupt delivery.

Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20230725143857.228626-2-iii@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Alexander Gordeev:

- Fix virtual vs physical address confusion in vmem_add_range() an

Merge tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Alexander Gordeev:

- Fix virtual vs physical address confusion in vmem_add_range() and
vmem_remove_range() functions

- Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h>
throughout s390 code

- Make all PSW related defines also available for assembler files.
Remove PSW_DEFAULT_KEY define from uapi for that

- When adding an undefined symbol the build still succeeds, but
userspace crashes trying to execute VDSO, because the symbol is not
resolved. Add undefined symbols check to prevent that

- Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
memory when executing s390 crypto adapter IOCTL

- Add -fPIE flag to prevent decompressor misaligned symbol build error
with clang

- Use .balign instead of .align everywhere. This is a no-op for s390,
but with this there no mix in using .align and .balign anymore

- Filter out -mno-pic-data-is-text-relative flag when compiling kernel
to prevent VDSO build error

- Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
mask directly

- Do not retry administrative requests to some s390 crypto cards, since
the firmware assumes replay attacks

- Remove most of the debug code, which is build in when kernel config
option CONFIG_ZCRYPT_DEBUG is enabled

- Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
off the multiple devices support for the s390 zcrypt device driver

- With the conversion to generic entry machine checks are accounted to
the current context instead of irq time. As result, the STCKF
instruction at the beginning of the machine check handler and the
lowcore member are no longer required, therefore remove it

- Fix various typos found with codespell

- Minor cleanups to CPU-measurement Counter and Sampling Facilities
code

- Revert patch that removes VMEM_MAX_PHYS macro, since it causes a
regression

* tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits)
Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"
s390/cpum_sf: remove check on CPU being online
s390/cpum_sf: handle casts consistently
s390/cpum_sf: remove unnecessary debug statement
s390/cpum_sf: remove parameter in call to pr_err
s390/cpum_sf: simplify function setup_pmu_cpu
s390/cpum_cf: remove unneeded debug statements
s390/entry: remove mcck clock
s390: fix various typos
s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option
s390/zcrypt: do not retry administrative requests
s390/zcrypt: cleanup some debug code
s390/entry: rework entering DAT-on mode on CPU restart
s390/mm: fence off VM macros from asm and linker
s390: include linux/io.h instead of asm/io.h
s390/ptrace: make all psw related defines also available for asm
s390/ptrace: remove PSW_DEFAULT_KEY from uapi
s390/vdso: filter out mno-pic-data-is-text-relative cflag
s390: consistently use .balign instead of .align
s390/decompressor: fix misaligned symbol build error
...

show more ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM64:

- Eager page splitting optimization for dirty logging, optionally
allowing f

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM64:

- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.

- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.

- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.

- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.

- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.

- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.

- Ensure timer IRQs are consistently released in the init failure
paths.

- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.

- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.

RISC-V:

- Redirect AMO load/store misaligned traps to KVM guest

- Trap-n-emulate AIA in-kernel irqchip for KVM guest

- Svnapot support for KVM Guest

s390:

- New uvdevice secret API

- CMM selftest and fixes

- fix racy access to target CPU for diag 9c

x86:

- Fix missing/incorrect #GP checks on ENCLS

- Use standard mmu_notifier hooks for handling APIC access page

- Drop now unnecessary TR/TSS load after VM-Exit on AMD

- Print more descriptive information about the status of SEV and
SEV-ES during module load

- Add a test for splitting and reconstituting hugepages during and
after dirty logging

- Add support for CPU pinning in demand paging test

- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way

- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)

- Move handling of PAT out of MTRR code and dedup SVM+VMX code

- Fix output of PIC poll command emulation when there's an interrupt

- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.

- Misc cleanups, fixes and comments

Generic:

- Miscellaneous bugfixes and cleanups

Selftests:

- Generate dependency files so that partial rebuilds work as
expected"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...

show more ...