Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM:

- Fix the handling of the phycal timer offset when FEAT_ECV and
CNTPOFF_EL2 are

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM:

- Fix the handling of the phycal timer offset when FEAT_ECV and
CNTPOFF_EL2 are implemented

- Restore the functionnality of Permission Indirection that was
broken by the Fine Grained Trapping rework

- Cleanup some PMU event sharing code

MIPS:

- Fix W=1 build

s390:

- One small fix for gisa to avoid stalls

x86:

- Truncate writes to PMU counters to the counter's width to avoid
spurious overflows when emulating counter events in software

- Set the LVTPC entry mask bit when handling a PMI (to match
Intel-defined architectural behavior)

- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work
to kick the guest out of emulated halt

- Fix for loading XSAVE state from an old kernel into a new one

- Fixes for AMD AVIC

selftests:

- Play nice with %llx when formatting guest printf and assert
statements

- Clean up stale test metadata

- Zero-initialize structures in memslot perf test to workaround a
suspected 'may be used uninitialized' false positives from GCC"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: arm64: timers: Correctly handle TGE flip with CNTPOFF_EL2
KVM: arm64: POR{E0}_EL1 do not need trap handlers
KVM: arm64: Add nPIR{E0}_EL1 to HFG traps
KVM: MIPS: fix -Wunused-but-set-variable warning
KVM: arm64: pmu: Drop redundant check for non-NULL kvm_pmu_events
KVM: SVM: Fix build error when using -Werror=unused-but-set-variable
x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()
x86: KVM: SVM: add support for Invalid IPI Vector interception
x86: KVM: SVM: always update the x2avic msr interception
KVM: selftests: Force load all supported XSAVE state in state test
KVM: selftests: Load XSAVE state into untouched vCPU during state test
KVM: selftests: Touch relevant XSAVE state in guest for state test
KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}
x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer
KVM: selftests: Zero-initialize entire test_result in memslot perf test
KVM: selftests: Remove obsolete and incorrect test case metadata
KVM: selftests: Treat %llx like %lx when formatting guest printf
KVM: x86/pmu: Synthesize at most one PMI per VM-exit
KVM: x86: Mask LVTPC when handling a PMI
KVM: x86/pmu: Truncate counter value to allowed width on write
...

show more ...

Merge tag 'kvm-s390-master-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

One small fix for gisa to avoid stalls.

KVM: s390: fix gisa destroy operation might lead to cpu stalls

A GISA cannot be destroyed as long it is linked in the GIB alert list
as this would break the alert list. Just waiting for its removal

KVM: s390: fix gisa destroy operation might lead to cpu stalls

A GISA cannot be destroyed as long it is linked in the GIB alert list
as this would break the alert list. Just waiting for its removal from
the list triggered by another vm is not sufficient as it might be the
only vm. The below shown cpu stall situation might occur when GIB alerts
are delayed and is fixed by calling process_gib_alert_list() instead of
waiting.

At this time the vcpus of the vm are already destroyed and thus
no vcpu can be kicked to enter the SIE again if for some reason an
interrupt is pending for that vm.

Additionally the IAM restore value is set to 0x00. That would be a bug
introduced by incomplete device de-registration, i.e. missing
kvm_s390_gisc_unregister() call.

Setting this value and the IAM in the GISA to 0x00 guarantees that late
interrupts don't bring the GISA back into the alert list.

CPU stall caused by kvm_s390_gisa_destroy():

[ 4915.311372] rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 14-.... } 24533 jiffies s: 5269 root: 0x1/.
[ 4915.311390] rcu: blocking rcu_node structures (internal RCU debug): l=1:0-15:0x4000/.
[ 4915.311394] Task dump for CPU 14:
[ 4915.311395] task:qemu-system-s39 state:R running task stack:0 pid:217198 ppid:1 flags:0x00000045
[ 4915.311399] Call Trace:
[ 4915.311401] [<0000038003a33a10>] 0x38003a33a10
[ 4933.861321] rcu: INFO: rcu_sched self-detected stall on CPU
[ 4933.861332] rcu: 14-....: (42008 ticks this GP) idle=53f4/1/0x4000000000000000 softirq=61530/61530 fqs=14031
[ 4933.861353] rcu: (t=42008 jiffies g=238109 q=100360 ncpus=18)
[ 4933.861357] CPU: 14 PID: 217198 Comm: qemu-system-s39 Not tainted 6.5.0-20230816.rc6.git26.a9d17c5d8813.300.fc38.s390x #1
[ 4933.861360] Hardware name: IBM 8561 T01 703 (LPAR)
[ 4933.861361] Krnl PSW : 0704e00180000000 000003ff804bfc66 (kvm_s390_gisa_destroy+0x3e/0xe0 [kvm])
[ 4933.861414] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
[ 4933.861416] Krnl GPRS: 0000000000000000 00000372000000fc 00000002134f8000 000000000d5f5900
[ 4933.861419] 00000002f5ea1d18 00000002f5ea1d18 0000000000000000 0000000000000000
[ 4933.861420] 00000002134fa890 00000002134f8958 000000000d5f5900 00000002134f8000
[ 4933.861422] 000003ffa06acf98 000003ffa06858b0 0000038003a33c20 0000038003a33bc8
[ 4933.861430] Krnl Code: 000003ff804bfc58: ec66002b007e cij %r6,0,6,000003ff804bfcae
000003ff804bfc5e: b904003a lgr %r3,%r10
#000003ff804bfc62: a7f40005 brc 15,000003ff804bfc6c
>000003ff804bfc66: e330b7300204 lg %r3,10032(%r11)
000003ff804bfc6c: 58003000 l %r0,0(%r3)
000003ff804bfc70: ec03fffb6076 crj %r0,%r3,6,000003ff804bfc66
000003ff804bfc76: e320b7600271 lay %r2,10080(%r11)
000003ff804bfc7c: c0e5fffea339 brasl %r14,000003ff804942ee
[ 4933.861444] Call Trace:
[ 4933.861445] [<000003ff804bfc66>] kvm_s390_gisa_destroy+0x3e/0xe0 [kvm]
[ 4933.861460] ([<00000002623523de>] free_unref_page+0xee/0x148)
[ 4933.861507] [<000003ff804aea98>] kvm_arch_destroy_vm+0x50/0x120 [kvm]
[ 4933.861521] [<000003ff8049d374>] kvm_destroy_vm+0x174/0x288 [kvm]
[ 4933.861532] [<000003ff8049d4fe>] kvm_vm_release+0x36/0x48 [kvm]
[ 4933.861542] [<00000002623cd04a>] __fput+0xea/0x2a8
[ 4933.861547] [<00000002620d5bf8>] task_work_run+0x88/0xf0
[ 4933.861551] [<00000002620b0aa6>] do_exit+0x2c6/0x528
[ 4933.861556] [<00000002620b0f00>] do_group_exit+0x40/0xb8
[ 4933.861557] [<00000002620b0fa6>] __s390x_sys_exit_group+0x2e/0x30
[ 4933.861559] [<0000000262d481f4>] __do_syscall+0x1d4/0x200
[ 4933.861563] [<0000000262d59028>] system_call+0x70/0x98
[ 4933.861565] Last Breaking-Event-Address:
[ 4933.861566] [<0000038003a33b60>] 0x38003a33b60

Fixes: 9f30f6216378 ("KVM: s390: add gib_alert_irq_handler()")
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20230901105823.3973928-1-mimu@linux.ibm.com
Message-ID: <20230901105823.3973928-1-mimu@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM:

- Clean up vCPU targets, always returning generic v8 as the preferred
target

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM:

- Clean up vCPU targets, always returning generic v8 as the preferred
target

- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)

- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.

- Fix vPMU issues related to handling of PMUver.

- Don't unnecessary align non-stack allocations in the EL2 VA space

- Drop HCR_VIRT_EXCP_MASK, which was never used...

- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead

- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

- Remove prototypes without implementations

RISC-V:

- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

- Added ONE_REG interface for SATP mode

- Added ONE_REG interface to enable/disable multiple ISA extensions

- Improved error codes returned by ONE_REG interfaces

- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

- Added get-reg-list selftest for KVM RISC-V

s390:

- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.

- Guest debug fixes (Ilya)

x86:

- Clean up KVM's handling of Intel architectural events

- Intel bugfixes

- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs

- Clean up LBR virtualization code

- Fix a bug where KVM fails to set the target pCPU during an IRTE
update

- Fix fatal bugs in SEV-ES intrahost migration

- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)

- Retry APIC map recalculation if a vCPU is added/enabled

- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM

- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code

- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID

- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU

- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection

- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process

Generic:

- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.

- Drop unused function declarations

Selftests:

- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting

- Clean up the PMU event filter test and add new testcases

- Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...

show more ...

Merge tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:

- A couple of virtual vs physical address confusion fixes

- Rework

Merge tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:

- A couple of virtual vs physical address confusion fixes

- Rework locking in dcssblk driver to address a lockdep warning

- Remove support for "noexec" kernel command line option since there is
no use case where it would make sense

- Simplify kernel mapping setup and get rid of quite a bit of code

- Add architecture specific __set_memory_yy() functions which allow us
to modify kernel mappings. Unlike the set_memory_xx() variants they
take void pointer start and end parameters, which allows using them
without the usual casts, and also to use them on areas larger than
8TB.

Note that the set_memory_xx() family comes with an int num_pages
parameter which overflows with 8TB. This could be addressed by
changing the num_pages parameter to unsigned long, however requires
to change all architectures, since the module code expects an int
parameter (see module_set_memory()).

This was indeed an issue since for debug_pagealloc() we call
set_memory_4k() on the whole identity mapping. Therefore address this
for now with the __set_memory_yy() variant, and address common code
later

- Use dev_set_name() and also fix memory leak in zcrypt driver error
handling

- Remove unused lsi_mask from airq_struct

- Add warning for invalid kernel mapping requests

* tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmem: do not silently ignore mapping limit
s390/zcrypt: utilize dev_set_name() ability to use a formatted string
s390/zcrypt: don't leak memory if dev_set_name() fails
s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
s390/airq: remove lsi_mask from airq_struct
s390/mm: use __set_memory() variants where useful
s390/set_memory: add __set_memory() variant
s390/set_memory: generate all set_memory() functions
s390/mm: improve description of mapping permissions of prefix pages
s390/amode31: change type of __samode31, __eamode31, etc
s390/mm: simplify kernel mapping setup
s390: remove "noexec" option
s390/vmem: fix virtual vs physical address confusion
s390/dcssblk: fix lockdep warning
s390/monreader: fix virtual vs physical address confusion

show more ...

Merge tag 'kvm-s390-next-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to

Merge tag 'kvm-s390-next-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.

- Guest debug fixes (Ilya)

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

s390/airq: remove lsi_mask from airq_struct

Remove the field `lsi_mask` from `struct airq_struct` as it is not
utilized for any adapter interrupt, other than setting it to the default
value of 0xff.

s390/airq: remove lsi_mask from airq_struct

Remove the field `lsi_mask` from `struct airq_struct` as it is not
utilized for any adapter interrupt, other than setting it to the default
value of 0xff.

Because nobody is using this functionality, all it does is cost a little
bit of time with each delivered adapter interrupt.

Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

KVM: s390: interrupt: Fix single-stepping into interrupt handlers

After single-stepping an instruction that generates an interrupt, GDB
ends up on the second instruction of the respective interrupt

KVM: s390: interrupt: Fix single-stepping into interrupt handlers

After single-stepping an instruction that generates an interrupt, GDB
ends up on the second instruction of the respective interrupt handler.

The reason is that vcpu_pre_run() manually delivers the interrupt, and
then __vcpu_run() runs the first handler instruction using the
CPUSTAT_P flag. This causes a KVM_SINGLESTEP exit on the second handler
instruction.

Fix by delaying the KVM_SINGLESTEP exit until after the manual
interrupt delivery.

Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20230725143857.228626-2-iii@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull mm updates from Andrew Morton:

- Yosry Ahmed brought back some cgroup v1 stats in OOM logs

-

Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull mm updates from Andrew Morton:

- Yosry Ahmed brought back some cgroup v1 stats in OOM logs

- Yosry has also eliminated cgroup's atomic rstat flushing

- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability

- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning

- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface

- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree

- Johannes Weiner has done some cleanup work on the compaction code

- David Hildenbrand has contributed additional selftests for
get_user_pages()

- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code

- Baolin Wang has provided some compaction cleanups,

- SeongJae Park continues maintenance work on the DAMON code

- Huang Ying has done some maintenance on the swap code's usage of
device refcounting

- Christoph Hellwig has some cleanups for the filemap/directio code

- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses

- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings

- John Hubbard has a series of fixes to the MM selftesting code

- ZhangPeng continues the folio conversion campaign

- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock

- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8

- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management

- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code

- Vishal Moola also has done some folio conversion work

- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

mm/gup: remove vmas parameter from get_user_pages_remote()

The only instances of get_user_pages_remote() invocations which used the
vmas parameter were for a single page which can instead simply loo

mm/gup: remove vmas parameter from get_user_pages_remote()

The only instances of get_user_pages_remote() invocations which used the
vmas parameter were for a single page which can instead simply look up the
VMA directly. In particular:-

- __update_ref_ctr() looked up the VMA but did nothing with it so we simply
remove it.

- __access_remote_vm() was already using vma_lookup() when the original
lookup failed so by doing the lookup directly this also de-duplicates the
code.

We are able to perform these VMA operations as we already hold the
mmap_lock in order to be able to call get_user_pages_remote().

As part of this work we add get_user_page_vma_remote() which abstracts the
VMA lookup, error handling and decrementing the page reference count should
the VMA lookup fail.

This forms part of a broader set of patches intended to eliminate the vmas
parameter altogether.

[akpm@linux-foundation.org: avoid passing NULL to PTR_ERR]
Link: https://lkml.kernel.org/r/d20128c849ecdbf4dd01cc828fcec32127ed939a.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> (for arm64)
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com> (for s390)
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>