Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

- Add vfio-ap support to pass-through crypto devices to secure
executio

Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

- Add vfio-ap support to pass-through crypto devices to secure
execution guests

- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly

- Add missing secure/has_secure sysfs files for the case where it is
not possible to figure where a system has been booted from. Existing
user space relies on that these files are always present

- Fix DCSS block device driver list corruption, caused by incorrect
error handling

- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking

- Cleanups, improvements, and minor fixes to the kernel mapping setup

- Fix various virtual vs physical address confusions

- Move pfault code to separate file, since it has nothing to do with
regular fault handling

- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already

- Add HAVE_FUNCTION_GRAPH_RETVAL support

- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future

- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver

- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space

- Couple of other small fixes and improvements all over the place

* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390/pci: use builtin_misc_device macro to simplify the code
s390/vfio-ap: make sure nib is shared
KVM: s390: export kvm_s390_pv*_is_protected functions
s390/uv: export uv_pin_shared for direct usage
s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
s390/vfio-ap: handle queue state change in progress on reset
s390/vfio-ap: use work struct to verify queue reset
s390/vfio-ap: store entire AP queue status word with the queue object
s390/vfio-ap: remove upper limit on wait for queue reset to complete
s390/vfio-ap: allow deconfigured queue to be passed through to a guest
s390/vfio-ap: wait for response code 05 to clear on queue reset
s390/vfio-ap: clean up irq resources if possible
s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
s390/ipl: refactor deprecated strncpy
s390/ipl: fix virtual vs physical address confusion
s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
...

show more ...

s390: remove unneeded #include <asm/export.h>

There is no EXPORT_SYMBOL line there, hence #include <asm/export.h>
is unneeded.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lo

s390: remove unneeded #include <asm/export.h>

There is no EXPORT_SYMBOL line there, hence #include <asm/export.h>
is unneeded.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230806151641.394720-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/ftrace: use la instead of aghik in return_to_handler()

Nathan Chancellor reported the following build error when compiling the
kernel with CONFIG_MARCH_Z10=y:

arch/s390/kernel/mcount.S: Asse

s390/ftrace: use la instead of aghik in return_to_handler()

Nathan Chancellor reported the following build error when compiling the
kernel with CONFIG_MARCH_Z10=y:

arch/s390/kernel/mcount.S: Assembler messages:
arch/s390/kernel/mcount.S:140: Error: Unrecognized opcode: `aghik'

The aghik instruction is only available since z196. Use the la instruction
instead which is available for all machines.

Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20230725211105.GA224840@dev-arch.thelio-3990X
Fixes: 1256e70a082a ("s390/ftrace: enable HAVE_FUNCTION_GRAPH_RETVAL")
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Link: https://lore.kernel.org/r/20230726061834.1300984-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/tracing: pass struct ftrace_regs to ftrace_trace_function

ftrace_trace_function expects a struct ftrace_regs, but the s390
architecure code passes struct pt_regs. This isn't a problem with the

s390/tracing: pass struct ftrace_regs to ftrace_trace_function

ftrace_trace_function expects a struct ftrace_regs, but the s390
architecure code passes struct pt_regs. This isn't a problem with the
current code because struct ftrace_regs contains only one member:
struct pt_regs. To avoid issues in the future this should be fixed.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/ftrace: enable HAVE_FUNCTION_GRAPH_RETVAL

Add support for tracing return values in the function graph tracer.
This requires return_to_handler() to record gpr2 and the frame pointer

Signed-off-

s390/ftrace: enable HAVE_FUNCTION_GRAPH_RETVAL

Add support for tracing return values in the function graph tracer.
This requires return_to_handler() to record gpr2 and the frame pointer

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for stackleak feature. Also allow specifying
architecture-

Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for stackleak feature. Also allow specifying
architecture-specific stackleak poison function to enable faster
implementation. On s390, the mvc-based implementation helps decrease
typical overhead from a factor of 3 to just 25%

- Convert all assembler files to use SYM* style macros, deprecating the
ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS

- Improve KASLR to also randomize module and special amode31 code base
load addresses

- Rework decompressor memory tracking to support memory holes and
improve error handling

- Add support for protected virtualization AP binding

- Add support for set_direct_map() calls

- Implement set_memory_rox() and noexec module_alloc()

- Remove obsolete overriding of mem*() functions for KASAN

- Rework kexec/kdump to avoid using nodat_stack to call purgatory

- Convert the rest of the s390 code to use flexible-array member
instead of a zero-length array

- Clean up uaccess inline asm

- Enable ARCH_HAS_MEMBARRIER_SYNC_CORE

- Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
DEBUG_FORCE_FUNCTION_ALIGN_64B

- Resolve last_break in userspace fault reports

- Simplify one-level sysctl registration

- Clean up branch prediction handling

- Rework CPU counter facility to retrieve available counter sets just
once

- Other various small fixes and improvements all over the code

* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
s390/stackleak: provide fast __stackleak_poison() implementation
stackleak: allow to specify arch specific stackleak poison function
s390: select ARCH_USE_SYM_ANNOTATIONS
s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
s390: wire up memfd_secret system call
s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
s390/mm: use BIT macro to generate SET_MEMORY bit masks
s390/relocate_kernel: adjust indentation
s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
s390/entry: use SYM* macros instead of ENTRY(), etc.
s390/purgatory: use SYM* macros instead of ENTRY(), etc.
s390/kprobes: use SYM* macros instead of ENTRY(), etc.
s390/reipl: use SYM* macros instead of ENTRY(), etc.
s390/head64: use SYM* macros instead of ENTRY(), etc.
s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
s390/mcount: use SYM* macros instead of ENTRY(), etc.
s390/crc32le: use SYM* macros instead of ENTRY(), etc.
s390/crc32be: use SYM* macros instead of ENTRY(), etc.
s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
s390/amode31: use SYM* macros instead of ENTRY(), etc.
...

show more ...

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
"ACPI:

- Improve error reporting when failing to manage SDEI on AGDI

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
"ACPI:

- Improve error reporting when failing to manage SDEI on AGDI device
removal

Assembly routines:

- Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR

- Allow the compiler to allocate the registers used for CAS
instructions

CPU features and system registers:

- Cleanups to the way in which CPU features are identified from the
ID register fields

- Extend system register definition generation to handle Enum types
when defining shared register fields

- Generate definitions for new _EL2 registers and add new fields for
ID_AA64PFR1_EL1

- Allow SVE to be disabled separately from SME on the kernel
command-line

Tracing:

- Support for "direct calls" in ftrace, which enables BPF tracing for
arm64

Kdump:

- Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce TLB
pressure when a crashkernel is loaded.

Memory management:

- Try again to remove data cache invalidation from the coherent DMA
allocation path

- Simplify the fixmap code by mapping at page granularity

- Allow the kfence pool to be allocated early, preventing the rest of
the linear mapping from being forced to page granularity

Perf and PMU:

- Move CPU PMU code out to drivers/perf/ where it can be reused by
the 32-bit ARM architecture when running on ARMv8 CPUs

- Fix race between CPU PMU probing and pKVM host de-privilege

- Add support for Apple M2 CPU PMU

- Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports

- Minor fixes and cleanups to system PMU drivers

Stack tracing:

- Use the XPACLRI instruction to strip PAC from pointers, rather than
rolling our own function in C

- Remove redundant PAC removal for toolchains that handle this in
their builtins

- Make backtracing more resilient in the face of instrumentation

Miscellaneous:

- Fix single-step with KGDB

- Remove harmless warning when 'nokaslr' is passed on the kernel
command-line

- Minor fixes and cleanups across the board"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
arm64: kexec: include reboot.h
arm64: delete dead code in this_cpu_set_vectors()
arm64/cpufeature: Use helper macro to specify ID register for capabilites
drivers/perf: hisi: add NULL check for name
drivers/perf: hisi: Remove redundant initialized of pmu->name
arm64/cpufeature: Consistently use symbolic constants for min_field_value
arm64/cpufeature: Pull out helper for CPUID register definitions
arm64/sysreg: Convert HFGITR_EL2 to automatic generation
ACPI: AGDI: Improve error reporting for problems during .remove()
arm64: kernel: Fix kernel warning when nokaslr is passed to commandline
perf/arm-cmn: Fix port detection for CMN-700
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
arm64: move PAC masks to <asm/pointer_auth.h>
arm64: use XPACLRI to strip PAC
arm64: avoid redundant PAC stripping in __builtin_return_address()
arm64/sme: Fix some comments of ARM SME
arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2()
arm64/signal: Use system_supports_tpidr2() to check TPIDR2
arm64/idreg: Don't disable SME when disabling SVE
...

show more ...

Merge branch 'for-next/ftrace' into for-next/core

* for-next/ftrace:
arm64: ftrace: Simplify get_ftrace_plt
arm64: ftrace: Add direct call support
ftrace: selftest: remove broken trace_direct_

Merge branch 'for-next/ftrace' into for-next/core

* for-next/ftrace:
arm64: ftrace: Simplify get_ftrace_plt
arm64: ftrace: Add direct call support
ftrace: selftest: remove broken trace_direct_tramp
ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS
ftrace: Store direct called addresses in their ops
ftrace: Rename _ftrace_direct_multi APIs to _ftrace_direct APIs
ftrace: Remove the legacy _ftrace_direct API
ftrace: Replace uses of _ftrace_direct APIs with _ftrace_direct_multi
ftrace: Let unregister_ftrace_direct_multi() call ftrace_free_filter()

show more ...

s390/mcount: use SYM* macros instead of ENTRY(), etc.

Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <

s390/mcount: use SYM* macros instead of ENTRY(), etc.

Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

Merge tag 'trace-direct-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace into for-next/ftrace

Pull in ftrace trampoline updates from Steve so that we can implement
suppor

Merge tag 'trace-direct-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace into for-next/ftrace

Pull in ftrace trampoline updates from Steve so that we can implement
support for direct calls for arm64 on top:

tracing: Direct trampoline updates

Updates to the direct trampoline to allow ARM64 to have direct
trampolines.

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

ftrace: selftest: remove broken trace_direct_tramp

The ftrace selftest code has a trace_direct_tramp() function which it
uses as a direct call trampoline. This happens to work on x86, since the
dire

ftrace: selftest: remove broken trace_direct_tramp

The ftrace selftest code has a trace_direct_tramp() function which it
uses as a direct call trampoline. This happens to work on x86, since the
direct call's return address is in the usual place, and can be returned
to via a RET, but in general the calling convention for direct calls is
different from regular function calls, and requires a trampoline written
in assembly.

On s390, regular function calls place the return address in %r14, and an
ftrace patch-site in an instrumented function places the trampoline's
return address (which is within the instrumented function) in %r0,
preserving the original %r14 value in-place. As a regular C function
will return to the address in %r14, using a C function as the trampoline
results in the trampoline returning to the caller of the instrumented
function, skipping the body of the instrumented function.

Note that the s390 issue is not detcted by the ftrace selftest code, as
the instrumented function is trivial, and returning back into the caller
happens to be equivalent.

On arm64, regular function calls place the return address in x30, and
an ftrace patch-site in an instrumented function saves this into r9
and places the trampoline's return address (within the instrumented
function) in x30. A regular C function will return to the address in
x30, but will not restore x9 into x30. Consequently, using a C function
as the trampoline results in returning to the trampoline's return
address having corrupted x30, such that when the instrumented function
returns, it will return back into itself.

To avoid future issues in this area, remove the trace_direct_tramp()
function, and require that each architecture with direct calls provides
a stub trampoline, named ftrace_stub_direct_tramp. This can be written
to handle the architecture's trampoline calling convention, and in
future could be used elsewhere (e.g. in the ftrace ops sample, to
measure the overhead of direct calls), so we may as well always build it
in.

Link: https://lkml.kernel.org/r/20230321140424.345218-8-revest@chromium.org

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Florent Revest <revest@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...