Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:

- A couple of virtual vs physical address confusion fixes

- Rework

Merge tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:

- A couple of virtual vs physical address confusion fixes

- Rework locking in dcssblk driver to address a lockdep warning

- Remove support for "noexec" kernel command line option since there is
no use case where it would make sense

- Simplify kernel mapping setup and get rid of quite a bit of code

- Add architecture specific __set_memory_yy() functions which allow us
to modify kernel mappings. Unlike the set_memory_xx() variants they
take void pointer start and end parameters, which allows using them
without the usual casts, and also to use them on areas larger than
8TB.

Note that the set_memory_xx() family comes with an int num_pages
parameter which overflows with 8TB. This could be addressed by
changing the num_pages parameter to unsigned long, however requires
to change all architectures, since the module code expects an int
parameter (see module_set_memory()).

This was indeed an issue since for debug_pagealloc() we call
set_memory_4k() on the whole identity mapping. Therefore address this
for now with the __set_memory_yy() variant, and address common code
later

- Use dev_set_name() and also fix memory leak in zcrypt driver error
handling

- Remove unused lsi_mask from airq_struct

- Add warning for invalid kernel mapping requests

* tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmem: do not silently ignore mapping limit
s390/zcrypt: utilize dev_set_name() ability to use a formatted string
s390/zcrypt: don't leak memory if dev_set_name() fails
s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
s390/airq: remove lsi_mask from airq_struct
s390/mm: use __set_memory() variants where useful
s390/set_memory: add __set_memory() variant
s390/set_memory: generate all set_memory() functions
s390/mm: improve description of mapping permissions of prefix pages
s390/amode31: change type of __samode31, __eamode31, etc
s390/mm: simplify kernel mapping setup
s390: remove "noexec" option
s390/vmem: fix virtual vs physical address confusion
s390/dcssblk: fix lockdep warning
s390/monreader: fix virtual vs physical address confusion

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

s390: remove "noexec" option

Do the same like x86 with commit 76ea0025a214 ("x86/cpu: Remove "noexec"")
and remove the "noexec" kernel command line option.

Reviewed-by: Alexander Gordeev <agordeev@

s390: remove "noexec" option

Do the same like x86 with commit 76ea0025a214 ("x86/cpu: Remove "noexec"")
and remove the "noexec" kernel command line option.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

- Add vfio-ap support to pass-through crypto devices to secure
executio

Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

- Add vfio-ap support to pass-through crypto devices to secure
execution guests

- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly

- Add missing secure/has_secure sysfs files for the case where it is
not possible to figure where a system has been booted from. Existing
user space relies on that these files are always present

- Fix DCSS block device driver list corruption, caused by incorrect
error handling

- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking

- Cleanups, improvements, and minor fixes to the kernel mapping setup

- Fix various virtual vs physical address confusions

- Move pfault code to separate file, since it has nothing to do with
regular fault handling

- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already

- Add HAVE_FUNCTION_GRAPH_RETVAL support

- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future

- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver

- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space

- Couple of other small fixes and improvements all over the place

* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390/pci: use builtin_misc_device macro to simplify the code
s390/vfio-ap: make sure nib is shared
KVM: s390: export kvm_s390_pv*_is_protected functions
s390/uv: export uv_pin_shared for direct usage
s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
s390/vfio-ap: handle queue state change in progress on reset
s390/vfio-ap: use work struct to verify queue reset
s390/vfio-ap: store entire AP queue status word with the queue object
s390/vfio-ap: remove upper limit on wait for queue reset to complete
s390/vfio-ap: allow deconfigured queue to be passed through to a guest
s390/vfio-ap: wait for response code 05 to clear on queue reset
s390/vfio-ap: clean up irq resources if possible
s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
s390/ipl: refactor deprecated strncpy
s390/ipl: fix virtual vs physical address confusion
s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
...

show more ...

s390/mm: move pfault code to own C file

The pfault code has nothing to do with regular fault handling.

Therefore move it to an own C file. Also add an own pfault header
file. This way changes to se

s390/mm: move pfault code to own C file

The pfault code has nothing to do with regular fault handling.

Therefore move it to an own C file. Also add an own pfault header
file. This way changes to setup.h don't cause a recompile of the
pfault code and vice versa.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/mm: rework arch_get_mappable_range() callback

As per description in mm/memory_hotplug.c platforms should define
arch_get_mappable_range() that provides maximum possible addressable
physical mem

s390/mm: rework arch_get_mappable_range() callback

As per description in mm/memory_hotplug.c platforms should define
arch_get_mappable_range() that provides maximum possible addressable
physical memory range for which the linear mapping could be created.

The current implementation uses VMEM_MAX_PHYS macro as the maximum
mappable physical address and it is simply a cast to vmemmap. Since
the address is in physical address space the natural upper limit of
MAX_PHYSMEM_BITS is honoured:

vmemmap_start = min(vmemmap_start, 1UL << MAX_PHYSMEM_BITS);

Further, to make sure the identity mapping would not overlay with
vmemmap, the size of identity mapping could be stripped like this:

ident_map_size = min(ident_map_size, vmemmap_start);

Similarily, any other memory that could be added (e.g DCSS segment)
should not overlay with vmemmap as well and that is prevented by
using vmemmap (VMEM_MAX_PHYS macro) as the upper limit.

However, while the use of VMEM_MAX_PHYS brings the desired result
it actually poses two issues:

1. As described, vmemmap is handled as a physical address, although
it is actually a pointer to struct page in virtual address space.

2. As vmemmap is a virtual address it could have been located
anywhere in the virtual address space. However, the desired
necessity to honour MAX_PHYSMEM_BITS limit prevents that.

Rework arch_get_mappable_range() callback in a way it does not
use VMEM_MAX_PHYS macro and does not confuse the notion of virtual
vs physical address spacees as result. That paves the way for moving
vmemmap elsewhere and optimizing the virtual address space layout.

Introduce max_mappable preserved boot variable and let function
setup_kernel_memory_layout() set it up. As result, the rest of the
code is does not need to know the virtual memory layout specifics.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for stackleak feature. Also allow specifying
architecture-

Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add support for stackleak feature. Also allow specifying
architecture-specific stackleak poison function to enable faster
implementation. On s390, the mvc-based implementation helps decrease
typical overhead from a factor of 3 to just 25%

- Convert all assembler files to use SYM* style macros, deprecating the
ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS

- Improve KASLR to also randomize module and special amode31 code base
load addresses

- Rework decompressor memory tracking to support memory holes and
improve error handling

- Add support for protected virtualization AP binding

- Add support for set_direct_map() calls

- Implement set_memory_rox() and noexec module_alloc()

- Remove obsolete overriding of mem*() functions for KASAN

- Rework kexec/kdump to avoid using nodat_stack to call purgatory

- Convert the rest of the s390 code to use flexible-array member
instead of a zero-length array

- Clean up uaccess inline asm

- Enable ARCH_HAS_MEMBARRIER_SYNC_CORE

- Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
DEBUG_FORCE_FUNCTION_ALIGN_64B

- Resolve last_break in userspace fault reports

- Simplify one-level sysctl registration

- Clean up branch prediction handling

- Rework CPU counter facility to retrieve available counter sets just
once

- Other various small fixes and improvements all over the code

* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
s390/stackleak: provide fast __stackleak_poison() implementation
stackleak: allow to specify arch specific stackleak poison function
s390: select ARCH_USE_SYM_ANNOTATIONS
s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
s390: wire up memfd_secret system call
s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
s390/mm: use BIT macro to generate SET_MEMORY bit masks
s390/relocate_kernel: adjust indentation
s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
s390/entry: use SYM* macros instead of ENTRY(), etc.
s390/purgatory: use SYM* macros instead of ENTRY(), etc.
s390/kprobes: use SYM* macros instead of ENTRY(), etc.
s390/reipl: use SYM* macros instead of ENTRY(), etc.
s390/head64: use SYM* macros instead of ENTRY(), etc.
s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
s390/mcount: use SYM* macros instead of ENTRY(), etc.
s390/crc32le: use SYM* macros instead of ENTRY(), etc.
s390/crc32be: use SYM* macros instead of ENTRY(), etc.
s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
s390/amode31: use SYM* macros instead of ENTRY(), etc.
...

show more ...

s390/kaslr: provide kaslr_enabled() function

Just like other architectures provide a kaslr_enabled() function, instead
of directly accessing a global variable.

Also pass the renamed __kaslr_enabled

s390/kaslr: provide kaslr_enabled() function

Just like other architectures provide a kaslr_enabled() function, instead
of directly accessing a global variable.

Also pass the renamed __kaslr_enabled variable from the decompressor to the
kernel, so that kalsr_enabled() is available there too. This will be used
by a subsequent patch which randomizes the module base load address.

Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge branch 'decompressor-memory-tracking' into features

Vasily Gorbik says:

===================
Combine and generalize all methods for finding unused memory in
decompressor, while decreasing comp

Merge branch 'decompressor-memory-tracking' into features

Vasily Gorbik says:

===================
Combine and generalize all methods for finding unused memory in
decompressor, while decreasing complexity, add memory holes support,
while improving error handling (especially in low-memory conditions)
and debug-ability.
===================

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/boot: rework decompressor reserved tracking

Currently several approaches for finding unused memory in decompressor
are utilized. While "safe_addr" grows towards higher addresses, vmem
code allo

s390/boot: rework decompressor reserved tracking

Currently several approaches for finding unused memory in decompressor
are utilized. While "safe_addr" grows towards higher addresses, vmem
code allocates paging structures top down. The former requires careful
ordering. In addition to that ipl report handling code verifies potential
intersections with secure boot certificates on its own. Neither of two
approaches are memory holes aware and consistent with each other in low
memory conditions.

To solve that, existing approaches are generalized and combined
together, as well as online memory ranges are now taken into
consideration.

physmem_info has been extended to contain reserved memory ranges. New
set of functions allow to handle reserves and find unused memory.
All reserves and memory allocations are "typed". In case of out of
memory condition decompressor fails with detailed info on current
reserved ranges and usable online memory.

Linux version 6.2.0 ...
Kernel command line: ... mem=100M
Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000
Reserved memory ranges:
0000000000000000 0000000003e33000 DECOMPRESSOR
0000000003f00000 00000000057648a3 INITRD
00000000063e0000 00000000063e8000 VMEM
00000000063eb000 00000000063f4000 VMEM
00000000063f7800 0000000006400000 VMEM
0000000005800000 0000000006300000 KASAN
Usable online memory ranges (info source: sclp read info [3]):
0000000000000000 0000000006400000
Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d
Call Trace:
(sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c)
sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a
sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e
sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424
sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4
sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4

physmem_alloc_range allows to find free memory in specified range. It
should be used for one time allocations only like finding position for
amode31 and vmlinux.
physmem_alloc_top_down can be used just like physmem_alloc_range, but
it also allows multiple allocations per type and tries to merge sequential
allocations together. Which is useful for paging structures allocations.
If sequential allocations cannot be merged together they are "chained",
allowing easy per type reserved ranges enumeration and migration to
memblock later. Extra "struct reserved_range" allocated for chaining are
not tracked or reserved but rely on the fact that both
physmem_alloc_range and physmem_alloc_top_down search for free memory
only below current top down allocator position. All reserved ranges
should be transferred to memblock before memblock allocations are
enabled.

The startup code has been reordered to delay any memory allocations until
online memory ranges are detected and occupied memory ranges are marked as
reserved to be excluded from follow-up allocations.
Ipl report certificates are a special case, ipl report certificates list
is checked together with other memory reserves until certificates are
saved elsewhere.
KASAN required memory for shadow memory allocation and mapping is reserved
as 1 large chunk which is later passed to KASAN early initialization code.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...

s390/boot: remove non-functioning image bootable check

check_image_bootable() has been introduced with commit 627c9b62058e
("s390/boot: block uncompressed vmlinux booting attempts") to make sure
tha

s390/boot: remove non-functioning image bootable check

check_image_bootable() has been introduced with commit 627c9b62058e
("s390/boot: block uncompressed vmlinux booting attempts") to make sure
that users don't try to boot uncompressed vmlinux ELF image in qemu. It
used to be possible quite some time ago. That commit prevented confusion
with uncompressed vmlinux image starting to boot and even printing
kernel messages until it crashed. Users might have tried to report the
problem without realizing they are doing something which was not intended.
Since commit f1d3c5323772 ("s390/boot: move sclp early buffer from fixed
address in asm to C") check_image_bootable() doesn't function properly
anymore, as well as booting uncompressed vmlinux image in qemu doesn't
really produce any output and crashes. Moving forward it doesn't make
sense to fix check_image_bootable() anymore, so simply remove it.

Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

show more ...