Merge tag 'v6.6.39' into dev-6.6

This is the 6.6.39 stable release

riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma

[ Upstream commit 20e03d702e00a3e0269a1d6f9549c2e370492054 ]

commit 3f1e782998cd ("riscv: add ASID-based tlbflushing methods") adde

riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma

[ Upstream commit 20e03d702e00a3e0269a1d6f9549c2e370492054 ]

commit 3f1e782998cd ("riscv: add ASID-based tlbflushing methods") added
calls to the sfence.vma instruction with rs2 != x0. These single-ASID
instruction variants are also affected by SiFive errata CIP-1200.

Until now, the errata workaround was not needed for the single-ASID
sfence.vma variants, because they were only used when the ASID allocator
was enabled, and the affected SiFive platforms do not support multiple
ASIDs. However, we are going to start using those sfence.vma variants
regardless of ASID support, so now we need alternatives covering them.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-8-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.17' into dev-6.6

This is the 6.6.17 stable release

riscv: mm: execute local TLB flush after populating vmemmap

[ Upstream commit d9807d60c145836043ffa602328ea1d66dc458b1 ]

The spare_init() calls memmap_populate() many times to create VA to PA
mappi

riscv: mm: execute local TLB flush after populating vmemmap

[ Upstream commit d9807d60c145836043ffa602328ea1d66dc458b1 ]

The spare_init() calls memmap_populate() many times to create VA to PA
mapping for the VMEMMAP area, where all "struct page" are located once
CONFIG_SPARSEMEM_VMEMMAP is defined. These "struct page" are later
initialized in the zone_sizes_init() function. However, during this
process, no sfence.vma instruction is executed for this VMEMMAP area.
This omission may cause the hart to fail to perform page table walk
because some data related to the address translation is invisible to the
hart. To solve this issue, the local_flush_tlb_kernel_range() is called
right after the sparse_init() to execute a sfence.vma instruction for this
VMEMMAP area, ensuring that all data related to the address translation
is visible to the hart.

Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem")
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240117140333.2479667-1-vincent.chen@sifive.com
Fixes: 7a92fc8b4d20 ("mm: Introduce flush_cache_vmap_early()")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

mm: Introduce flush_cache_vmap_early()

[ Upstream commit 7a92fc8b4d20680e4c20289a670d8fca2d1f2c1b ]

The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot

mm: Introduce flush_cache_vmap_early()

[ Upstream commit 7a92fc8b4d20680e4c20289a670d8fca2d1f2c1b ]

The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot process, so early that it cannot use the
flush_cache_vmap() function which may depend on structures not yet
initialized (for example in riscv, we currently send an IPI to flush
other cpus TLB).

But on some architectures, we must call flush_cache_vmap(): for example,
in riscv, some uarchs can cache invalid TLB entries so we need to flush
the new established mapping to avoid taking an exception.

So fix this by introducing a new function flush_cache_vmap_early() which
is called right after setting the new page table entry and before
accessing this new mapping. This new function implements a local flush
tlb on riscv and is no-op for other architectures (same as today).

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

riscv: Improve flush_tlb_kernel_range()

[ Upstream commit 5e22bfd520ea8740e9a20314d2a890baf304c9d2 ]

This function used to simply flush the whole tlb of all harts, be more
subtile and try to only f

riscv: Improve flush_tlb_kernel_range()

[ Upstream commit 5e22bfd520ea8740e9a20314d2a890baf304c9d2 ]

This function used to simply flush the whole tlb of all harts, be more
subtile and try to only flush the range.

The problem is that we can only use PAGE_SIZE as stride since we don't know
the size of the underlying mapping and then this function will be improved
only if the size of the region to flush is < threshold * PAGE_SIZE.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb

[ Upstream commit 9d4e8d5fa7dbbb606b355f40d918a1feef821bc5 ]

Currently, when the range to flush covers more than one

riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb

[ Upstream commit 9d4e8d5fa7dbbb606b355f40d918a1feef821bc5 ]

Currently, when the range to flush covers more than one page (a 4K page or
a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole
tlb comes with a greater cost than flushing a single entry so we should
flush single entries up to a certain threshold so that:
threshold * cost of flushing a single entry < cost of flushing the whole
tlb.

Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

riscv: Improve tlb_flush()

[ Upstream commit c5e9b2c2ae82231d85d9650854e7b3e97dde33da ]

For now, tlb_flush() simply calls flush_tlb_mm() which results in a
flush of the whole TLB. So let's use mmu_

riscv: Improve tlb_flush()

[ Upstream commit c5e9b2c2ae82231d85d9650854e7b3e97dde33da ]

For now, tlb_flush() simply calls flush_tlb_mm() which results in a
flush of the whole TLB. So let's use mmu_gather fields to provide a more
fine-grained flush of the TLB.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge tag 'kvmarm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for 6.4

- Numerous fixes for the pathological lock inversion issue that
plagued K

Merge tag 'kvmarm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for 6.4

- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.

- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.

- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.

- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.

- The usual selftest fixes and improvements.

show more ...

Merge tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull interrupt updates from Thomas Gleixner:
"Core:

- Add tracepoints for tasklet callbacks which makes

Merge tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull interrupt updates from Thomas Gleixner:
"Core:

- Add tracepoints for tasklet callbacks which makes it possible to
analyze individual tasklet functions instead of guess working from
the overall duration of tasklet processing

- Ensure that secondary interrupt threads have their affinity
adjusted correctly

Drivers:

- A large rework of the RISC-V IPI management to prepare for a new
RISC-V interrupt architecture

- Small fixes and enhancements all over the place

- Removal of support for various obsolete hardware platforms and the
related code"

* tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip/st: Remove stih415/stih416 and stid127 platforms support
irqchip/gic-v3: Add Rockchip 3588001 erratum workaround
genirq: Update affinity of secondary threads
softirq: Add trace points for tasklet entry/exit
irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling
irqchip/loongson-pch-pic: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent
irqchip/loongson-eiointc: Fix returned value on parsing MADT
irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers
RISC-V: Use IPIs for remote icache flush when possible
RISC-V: Use IPIs for remote TLB flush when possible
RISC-V: Allow marking IPIs as suitable for remote FENCEs
RISC-V: Treat IPIs as normal Linux IRQs
irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
RISC-V: Clear SIP bit only when using SBI IPI operations
irqchip/irq-sifive-plic: Add syscore callbacks for hibernation
irqchip: Use of_property_read_bool() for boolean properties
irqchip/bcm-6345-l1: Request memory region
irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4
...

show more ...

Merge branch 'i2c/for-current' into i2c/for-mergewindow

This should have been in 6.3, but sadly I missed it.

Merge branches 'edac-drivers', 'edac-amd64' and 'edac-misc' into edac-updates

Combine all queued EDAC changes for submission into v6.4:

* ras/edac-drivers:
EDAC/i10nm: Add Intel Sierra Forest ser

Merge branches 'edac-drivers', 'edac-amd64' and 'edac-misc' into edac-updates

Combine all queued EDAC changes for submission into v6.4:

* ras/edac-drivers:
EDAC/i10nm: Add Intel Sierra Forest server support
EDAC/skx: Fix overflows on the DRAM row address mapping arrays

* ras/edac-amd64: (27 commits)
EDAC/amd64: Fix indentation in umc_determine_edac_cap()
EDAC/amd64: Add get_err_info() to pvt->ops
EDAC/amd64: Split dump_misc_regs() into dct/umc functions
EDAC/amd64: Split init_csrows() into dct/umc functions
EDAC/amd64: Split determine_edac_cap() into dct/umc functions
EDAC/amd64: Rename f17h_determine_edac_ctl_cap()
EDAC/amd64: Split setup_mci_misc_attrs() into dct/umc functions
EDAC/amd64: Split ecc_enabled() into dct/umc functions
EDAC/amd64: Split read_mc_regs() into dct/umc functions
EDAC/amd64: Split determine_memory_type() into dct/umc functions
EDAC/amd64: Split read_base_mask() into dct/umc functions
EDAC/amd64: Split prep_chip_selects() into dct/umc functions
EDAC/amd64: Rework hw_info_{get,put}
EDAC/amd64: Merge struct amd64_family_type into struct amd64_pvt
EDAC/amd64: Do not discover ECC symbol size for Family 17h and later
EDAC/amd64: Drop dbam_to_cs() for Family 17h and later
EDAC/amd64: Split get_csrow_nr_pages() into dct/umc functions
EDAC/amd64: Rename debug_display_dimm_sizes()

* ras/edac-misc:
EDAC/altera: Remove MODULE_LICENSE in non-module
EDAC: Sanitize MODULE_AUTHOR strings
EDAC/amd81[13]1: Remove trailing newline from MODULE_AUTHOR
EDAC/i5100: Fix typo in comment
EDAC/altera: Remove redundant error logging

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>

show more ...

Merge tag 'irqchip-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip changes from Marc Zyngier:

- Large RISC-V IPI rework to make way for a new int

Merge tag 'irqchip-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip changes from Marc Zyngier:

- Large RISC-V IPI rework to make way for a new interrupt
architecture

- More Loongarch fixes from Lianmin Lv, fixing issues in the so
called "dual-bridge" systems.

- Workaround for the nvidia T241 chip that gets confused in
3 and 4 socket configurations, leading to the GIC
malfunctionning in some contexts

- Drop support for non-firmware driven GIC configurarations
now that the old ARM11MP Cavium board is gone

- Workaround for the Rockchip 3588 chip that doesn't
correctly deal with the shareability attributes.

- Replace uses of of_find_property() with the more appropriate
of_property_read_bool()

- Make bcm-6345-l1 request its MMIO region

- Add suspend support to the SiFive PLIC

- Drop support for stih415, stih416 and stid127 platforms

Link: https://lore.kernel.org/lkml/20230421132104.3021536-1-maz@kernel.org

show more ...

Merge branch irq/riscv-ipi into irq/irqchip-next

* irq/riscv-ipi:
: .
: RISC-V IPI rework from Anup Patel:
:
: "This series aims to improve IPI support in Linux RISC-V in following ways:
:

Merge branch irq/riscv-ipi into irq/irqchip-next

* irq/riscv-ipi:
: .
: RISC-V IPI rework from Anup Patel:
:
: "This series aims to improve IPI support in Linux RISC-V in following ways:
: 1) Treat IPIs as normal per-CPU interrupts instead of having custom RISC-V
: specific hooks. This also makes Linux RISC-V IPI support aligned with
: other architectures.
: 2) Remote TLB flushes and icache flushes should prefer local IPIs instead
: of SBI calls whenever we have specialized hardware (such as RISC-V AIA
: IMSIC and RISC-V SWI) which allows S-mode software to directly inject
: IPIs without any assistance from M-mode runtime firmware."
: .
irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers
RISC-V: Use IPIs for remote icache flush when possible
RISC-V: Use IPIs for remote TLB flush when possible
RISC-V: Allow marking IPIs as suitable for remote FENCEs
RISC-V: Treat IPIs as normal Linux IRQs
irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
RISC-V: Clear SIP bit only when using SBI IPI operations

Signed-off-by: Marc Zyngier <maz@kernel.org>

show more ...

Merge branch 'v6.3-rc7'

Sync with the urgent patches; in particular:

a53ce18cacb4 ("sched/fair: Sanitize vruntime of entity being migrated")

Signed-off-by: Peter Zijlstra <peterz@infradead.org>