Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM:

- Clean up vCPU targets, always returning generic v8 as the preferred
target

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM:

- Clean up vCPU targets, always returning generic v8 as the preferred
target

- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)

- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.

- Fix vPMU issues related to handling of PMUver.

- Don't unnecessary align non-stack allocations in the EL2 VA space

- Drop HCR_VIRT_EXCP_MASK, which was never used...

- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead

- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

- Remove prototypes without implementations

RISC-V:

- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

- Added ONE_REG interface for SATP mode

- Added ONE_REG interface to enable/disable multiple ISA extensions

- Improved error codes returned by ONE_REG interfaces

- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

- Added get-reg-list selftest for KVM RISC-V

s390:

- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.

- Guest debug fixes (Ilya)

x86:

- Clean up KVM's handling of Intel architectural events

- Intel bugfixes

- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs

- Clean up LBR virtualization code

- Fix a bug where KVM fails to set the target pCPU during an IRTE
update

- Fix fatal bugs in SEV-ES intrahost migration

- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)

- Retry APIC map recalculation if a vCPU is added/enabled

- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM

- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code

- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID

- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU

- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection

- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process

Generic:

- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.

- Drop unused function declarations

Selftests:

- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting

- Clean up the PMU event filter test and add new testcases

- Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...

show more ...

Merge tag 'kvm-riscv-6.6-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 6.6

- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for Guest/VM
- Added ONE_REG interface f

Merge tag 'kvm-riscv-6.6-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 6.6

- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for Guest/VM
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

RISC-V: KVM: do not EOPNOTSUPP in set KVM_REG_RISCV_TIMER_REG

The KVM_REG_RISCV_TIMER_REG can be read via get_one_reg(). But trying to
write anything in this reg via set_one_reg() results in an EOPN

RISC-V: KVM: do not EOPNOTSUPP in set KVM_REG_RISCV_TIMER_REG

The KVM_REG_RISCV_TIMER_REG can be read via get_one_reg(). But trying to
write anything in this reg via set_one_reg() results in an EOPNOTSUPP.

Change the API to behave like cbom_block_size: instead of always
erroring out with EOPNOTSUPP, allow userspace to write the same value
(riscv_timebase) back, throwing an EINVAL if a different value is
attempted.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

show more ...

RISC-V: KVM: return ENOENT in *_one_reg() when reg is unknown

get_one_reg() and set_one_reg() are returning EINVAL errors for almost
everything: if a reg doesn't exist, if a reg ID is malformatted,

RISC-V: KVM: return ENOENT in *_one_reg() when reg is unknown

get_one_reg() and set_one_reg() are returning EINVAL errors for almost
everything: if a reg doesn't exist, if a reg ID is malformatted, if the
associated CPU extension that implements the reg isn't present in the
host, and for set_one_reg() if the value being written is invalid.

This isn't wrong according to the existing KVM API docs (EINVAL can be
used when there's no such register) but adding more ENOENT instances
will make easier for userspace to understand what went wrong.

Existing userspaces can be affected by this error code change. We
checked a few. As of current upstream code, crosvm doesn't check for any
particular errno code when using kvm_(get|set)_one_reg(). Neither does
QEMU. rust-vmm doesn't have kvm-riscv support yet. Thus we have a good
chance of changing these error codes now while the KVM RISC-V ecosystem
is still new, minimizing user impact.

Change all get_one_reg() and set_one_reg() implementations to return
-ENOENT at all "no such register" cases.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge branch 'i2c/for-current' into i2c/for-mergewindow

This should have been in 6.3, but sadly I missed it.

Merge branch 'v6.3-rc7'

Sync with the urgent patches; in particular:

a53ce18cacb4 ("sched/fair: Sanitize vruntime of entity being migrated")

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

We were stuck on rc2, should at least attempt to track drm-fixes
slightly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

We were stuck on rc2, should at least attempt to track drm-fixes
slightly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Add support for Rockchip RK860X regulators

Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:

This patch series introduces support for the Rockchip RK860X regulators,
while al

Add support for Rockchip RK860X regulators

Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:

This patch series introduces support for the Rockchip RK860X regulators,
while also providing a few fixes and improvements to the existing fan53555
driver.

RK8600/RK8601 are quite similar to the FAN53555 regulators.

RK8602/RK8603 are a bit different, having a wider output voltage
selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They are used
in the Rock 5B board to power the ARM Cortex-A76 cores and the NPU.

show more ...

Merge 6.3-rc6 into usb-next

We need the USB fixes in here for testing, and this resolves two merge
conflicts, one pointed out by linux-next:

drivers/usb/dwc3/dwc3-pci.c
drivers/usb/host/xhci-pci.

Merge 6.3-rc6 into usb-next

We need the USB fixes in here for testing, and this resolves two merge
conflicts, one pointed out by linux-next:

drivers/usb/dwc3/dwc3-pci.c
drivers/usb/host/xhci-pci.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge 6.3-rc6 into tty-next

We need the tty/serial fixes in here for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.3-rc6 into char-misc-next

We need it here to apply other char/misc driver changes to.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'iommufd/for-rc' into for-next

The following selftest patch requires both the bug fixes and the
improvements of the selftest framework.

* iommufd/for-rc:
iommufd: Do not corrupt the

Merge branch 'iommufd/for-rc' into for-next

The following selftest patch requires both the bug fixes and the
improvements of the selftest framework.

* iommufd/for-rc:
iommufd: Do not corrupt the pfn list when doing batch carry
iommufd: Fix unpinning of pages when an access is present
iommufd: Check for uptr overflow
Linux 6.3-rc5

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge 6.3-rc5 into driver-core-next

We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxf

Merge 6.3-rc5 into driver-core-next

We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Conflicts:

drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Conflicts:

drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e2d ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"RISC-V:

- Fix VM hang in case of timer delta being zero

ARM:

- MMU fixes:

- R

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"RISC-V:

- Fix VM hang in case of timer delta being zero

ARM:

- MMU fixes:

- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA

- Disable interrupts when walking user page tables to protect
against the page table being freed

- Read the MTE permissions for the VMA within the mmap lock
critical section, avoiding the use of a potentally stale VMA
pointer

- vPMU fixes:

- Return the sum of the current perf event value and PMC snapshot
for reads from userspace

- Don't save the value of guest writes to PMCR_EL0.{C,P}, which
could otherwise lead to userspace erroneously resetting the vPMU
during VM save/restore"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
riscv/kvm: Fix VM hang in case of timer delta being zero.
KVM: arm64: Check for kvm_vma_mte_allowed in the critical section
KVM: arm64: Disable interrupts while walking userspace PTs
KVM: arm64: Retry fault if vma_lookup() results become invalid
KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU
KVM: arm64: PMU: Fix GET_ONE_REG for vPMC regs to return the current value

show more ...