Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM:

- Clean up vCPU targets, always returning generic v8 as the preferred
target

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM:

- Clean up vCPU targets, always returning generic v8 as the preferred
target

- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)

- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.

- Fix vPMU issues related to handling of PMUver.

- Don't unnecessary align non-stack allocations in the EL2 VA space

- Drop HCR_VIRT_EXCP_MASK, which was never used...

- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead

- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

- Remove prototypes without implementations

RISC-V:

- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

- Added ONE_REG interface for SATP mode

- Added ONE_REG interface to enable/disable multiple ISA extensions

- Improved error codes returned by ONE_REG interfaces

- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

- Added get-reg-list selftest for KVM RISC-V

s390:

- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.

- Guest debug fixes (Ilya)

x86:

- Clean up KVM's handling of Intel architectural events

- Intel bugfixes

- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs

- Clean up LBR virtualization code

- Fix a bug where KVM fails to set the target pCPU during an IRTE
update

- Fix fatal bugs in SEV-ES intrahost migration

- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)

- Retry APIC map recalculation if a vCPU is added/enabled

- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM

- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code

- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID

- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU

- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection

- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process

Generic:

- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.

- Drop unused function declarations

Selftests:

- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting

- Clean up the PMU event filter test and add new testcases

- Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...

show more ...

Merge tag 'kvm-riscv-6.6-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 6.6

- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for Guest/VM
- Added ONE_REG interface f

Merge tag 'kvm-riscv-6.6-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 6.6

- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for Guest/VM
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

RISC-V: KVM: return ENOENT in *_one_reg() when reg is unknown

get_one_reg() and set_one_reg() are returning EINVAL errors for almost
everything: if a reg doesn't exist, if a reg ID is malformatted,

RISC-V: KVM: return ENOENT in *_one_reg() when reg is unknown

get_one_reg() and set_one_reg() are returning EINVAL errors for almost
everything: if a reg doesn't exist, if a reg ID is malformatted, if the
associated CPU extension that implements the reg isn't present in the
host, and for set_one_reg() if the value being written is invalid.

This isn't wrong according to the existing KVM API docs (EINVAL can be
used when there's no such register) but adding more ENOENT instances
will make easier for userspace to understand what went wrong.

Existing userspaces can be affected by this error code change. We
checked a few. As of current upstream code, crosvm doesn't check for any
particular errno code when using kvm_(get|set)_one_reg(). Neither does
QEMU. rust-vmm doesn't have kvm-riscv support yet. Thus we have a good
chance of changing these error codes now while the KVM RISC-V ecosystem
is still new, minimizing user impact.

Change all get_one_reg() and set_one_reg() implementations to return
-ENOENT at all "no such register" cases.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM64:

- Eager page splitting optimization for dirty logging, optionally
allowing f

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
"ARM64:

- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.

- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.

- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.

- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.

- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.

- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.

- Ensure timer IRQs are consistently released in the init failure
paths.

- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.

- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.

RISC-V:

- Redirect AMO load/store misaligned traps to KVM guest

- Trap-n-emulate AIA in-kernel irqchip for KVM guest

- Svnapot support for KVM Guest

s390:

- New uvdevice secret API

- CMM selftest and fixes

- fix racy access to target CPU for diag 9c

x86:

- Fix missing/incorrect #GP checks on ENCLS

- Use standard mmu_notifier hooks for handling APIC access page

- Drop now unnecessary TR/TSS load after VM-Exit on AMD

- Print more descriptive information about the status of SEV and
SEV-ES during module load

- Add a test for splitting and reconstituting hugepages during and
after dirty logging

- Add support for CPU pinning in demand paging test

- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way

- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)

- Move handling of PAT out of MTRR code and dedup SVM+VMX code

- Fix output of PIC poll command emulation when there's an interrupt

- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.

- Misc cleanups, fixes and comments

Generic:

- Miscellaneous bugfixes and cleanups

Selftests:

- Generate dependency files so that partial rebuilds work as
expected"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...

show more ...

Merge tag 'kvm-riscv-6.5-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 6.5

- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip

Merge tag 'kvm-riscv-6.5-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 6.5

- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

RISC-V: KVM: Implement device interface for AIA irqchip

We implement KVM device interface for in-kernel AIA irqchip so that
user-space can use KVM device ioctls to create, configure, and destroy
in-

RISC-V: KVM: Implement device interface for AIA irqchip

We implement KVM device interface for in-kernel AIA irqchip so that
user-space can use KVM device ioctls to create, configure, and destroy
in-kernel AIA irqchip.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

show more ...

RISC-V: KVM: Skeletal in-kernel AIA irqchip support

To incrementally implement in-kernel AIA irqchip support, we first
add minimal skeletal support which only compiles but does not provide
any funct

RISC-V: KVM: Skeletal in-kernel AIA irqchip support

To incrementally implement in-kernel AIA irqchip support, we first
add minimal skeletal support which only compiles but does not provide
any functionality.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

show more ...

RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero

We hard-code the kvm_riscv_aia_nr_hgei to zero until IMSIC HW
guest file support is added in KVM RISC-V.

Signed-off-by: Anup Patel <apatel@ventanamicr

RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero

We hard-code the kvm_riscv_aia_nr_hgei to zero until IMSIC HW
guest file support is added in KVM RISC-V.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

show more ...

RISC-V: KVM: Add IMSIC related defines

We add IMSIC related defines in a separate header so that different
parts of KVM code can share it. Once AIA drivers are merged will
have a common IMSIC header

RISC-V: KVM: Add IMSIC related defines

We add IMSIC related defines in a separate header so that different
parts of KVM code can share it. Once AIA drivers are merged will
have a common IMSIC header shared by both KVM and IRQCHIP driver.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

show more ...

RISC-V: KVM: Implement guest external interrupt line management

The RISC-V host will have one guest external interrupt line for each
VS-level IMSICs associated with a HART. The guest external interr

RISC-V: KVM: Implement guest external interrupt line management

The RISC-V host will have one guest external interrupt line for each
VS-level IMSICs associated with a HART. The guest external interrupt
lines are per-HART resources and hypervisor can use HGEIE, HGEIP, and
HIE CSRs to manage these guest external interrupt lines.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>