Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- The kernel now dynamically probes for misaligned

Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.

- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.

- Support for the V extension in ptrace(), again.

- Support for KASLR.

- Support for the BPF prog pack allocator in RISC-V.

- A handful of bug fixes and cleanups.

* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...

show more ...

Merge patch series "riscv: Introduce KASLR"

Alexandre Ghiti <alexghiti@rivosinc.com> says:

The following KASLR implementation allows to randomize the kernel mapping:

- virtually: we expect the boo

Merge patch series "riscv: Introduce KASLR"

Alexandre Ghiti <alexghiti@rivosinc.com> says:

The following KASLR implementation allows to randomize the kernel mapping:

- virtually: we expect the bootloader to provide a seed in the device-tree
- physically: only implemented in the EFI stub, it relies on the firmware to
provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation
hence the patch 3 factorizes KASLR related functions for riscv to take
advantage.

The new virtual kernel location is limited by the early page table that only
has one PUD and with the PMD alignment constraint, the kernel can only take
< 512 positions.

* b4-shazam-merge:
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR

Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

riscv: Introduce virtual kernel mapping KASLR

KASLR implementation relies on a relocatable kernel so that we can move
the kernel mapping.

The seed needed to virtually move the kernel is taken from

riscv: Introduce virtual kernel mapping KASLR

KASLR implementation relies on a relocatable kernel so that we can move
the kernel mapping.

The seed needed to virtually move the kernel is taken from the device tree,
so we rely on the bootloader to provide a correct seed. Zkr could be used
unconditionnally instead if implemented, but that's for another patch.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge tag 'arm-vfp-refactor-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

Refactor VFP support code and reimplement in C

The VFP related changes to permit k

Merge tag 'arm-vfp-refactor-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

Refactor VFP support code and reimplement in C

The VFP related changes to permit kernel mode NEON in softirq context
resulted in some issues regarding en/disabling of sofirqs from asm code,
and this made it clear that it would be better to handle more of it from
C code.

Given that we already have infrastructure that associates undefined
instruction exceptions with handler code based on value/mask pairs, we
can easily move the dispatch of VFP and NEON instructions to C code once
we reimplement the actual VFP support routine (which reasons about how
to deal with the exception and whether any emulation is needed) in C
code first.

With those out of the way, we can drop the partial decoding logic in asm
that reasons about which ISA is being used by user space, as the
remaining cases are all 32-bit ARM only. This leaves a FPE specific
routine with some iWMMXT logic that is easily duplicated in C as well,
allowing us to move the FPE asm code into the FPE asm source file, and
out of the shared entry code.

show more ...

Merge branch 'for-next' into for-linus

Pull the 6.5-devel branch for upstreaming.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'irqchip-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- A number of Loogson/Loogarch fixes

- Allow th

Merge tag 'irqchip-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

- A number of Loogson/Loogarch fixes

- Allow the core code to retrigger an interrupt that has
fired while the same interrupt is being handled on another
CPU, papering over a GICv3 architecture issue

- Work around an integration problem on ASR8601, where the CPU
numbering isn't representable in the GIC implementation...

- Add some missing interrupt to the STM32 irqchip

- A bunch of warning squashing triggered by W=1 builds

Link: https://lore.kernel.org/r/20230623224345.3577134-1-maz@kernel.org

show more ...

Merge patch series "Add Sipeed Lichee Pi 4A RISC-V board support"

Jisheng Zhang <jszhang@kernel.org> says:

Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered

Merge patch series "Add Sipeed Lichee Pi 4A RISC-V board support"

Jisheng Zhang <jszhang@kernel.org> says:

Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered by T-HEAD's TH1520 SoC. Add minimal device
tree files for the core module and the development board.

Support basic uart/gpio/dmac drivers, so supports booting to a basic
shell.

This also pulls in -rc2, because of some maintainers re-jigging that
went on in the interim in commit 80e62bc8487b ("MAINTAINERS: re-sort
all entries and fields").

Link: https://lore.kernel.org/r/20230617161529.2092-1-jszhang@kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging from drm-next to get commit e24e6d695377 ("drm/i915/display:
Implement fb_mmap callback function").

Signed-off-by: Thomas Zimmermann <tzimmermann@s

Merge drm/drm-next into drm-misc-next

Backmerging from drm-next to get commit e24e6d695377 ("drm/i915/display:
Implement fb_mmap callback function").

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Merge tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' into perf-tools-next

perf tools fixes for v6.4: 2nd batch

- Fix BPF CO-RE naming convention for checking the availability of fields on
'union pe

Merge tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' into perf-tools-next

perf tools fixes for v6.4: 2nd batch

- Fix BPF CO-RE naming convention for checking the availability of fields on
'union perf_mem_data_src' on the running kernel.

- Remove the use of llvm-strip on BPF skel object files, not needed, fixes a
build breakage when the llvm package, that contains it in most distros, isn't
installed.

- Fix tools that use both evsel->{bpf_counter_list,bpf_filters}, removing them from a
union.

- Remove extra "--" from the 'perf ftrace latency' --use-nsec option,
previously it was working only when using the '-n' alternative.

- Don't stop building when both binutils-devel and a C++ compiler isn't
available to compile the alternative C++ demangle support code, disable that
feature instead.

- Sync the linux/in.h and coresight-pmu.h header copies with the kernel sources.

- Fix relative include path to cs-etm.h.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-next

Sync the drm-intel-gt-next changes back to drm-intel-next via drm-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge 6.4-rc4 into usb-next

We need the USB fixes in here and this resolves merge conflicts in:
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/udc/core.c

Signed-off-by: Greg Kroah-Hartman <gregkh@l

Merge 6.4-rc4 into usb-next

We need the USB fixes in here and this resolves merge conflicts in:
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/udc/core.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge v6.4-rc4 into char-misc-next

We need the binder fixes in here for future changes and testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.4-rc3 into tty-next

We need the serial/tty fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: Merge up v6.4-rc3

Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.

regulator: Merge up v6.4-rc3

Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.

regmap: Merge up v6.4-rc3

Merge up v6.4-rc3 to get fixes which make my CI more stable.

Merge branch 'topic/midi20' into for-next

This is a (largish) patch set for adding the support of MIDI 2.0
functionality, mainly targeted for USB devices. MIDI 2.0 is a
complete overhaul of the 40-

Merge branch 'topic/midi20' into for-next

This is a (largish) patch set for adding the support of MIDI 2.0
functionality, mainly targeted for USB devices. MIDI 2.0 is a
complete overhaul of the 40-years old MIDI 1.0. Unlike MIDI 1.0 byte
stream, MIDI 2.0 uses packets in 32bit words for Universal MIDI Packet
(UMP) protocol. It supports both MIDI 1.0 commands for compatibility
and the extended MIDI 2.0 commands for higher resolutions and more
functions.

For supporting the UMP, the patch set extends the existing ALSA
rawmidi and sequencer interfaces, and adds the USB MIDI 2.0 support to
the standard USB-audio driver.

The rawmidi for UMP has a different device name (/dev/snd/umpC*D*) and
it reads/writes UMP packet data in 32bit CPU-native endianness. For
the old MIDI 1.0 applications, the legacy rawmidi interface is
provided, too.

As default, USB-audio driver will take the alternate setting for MIDI
2.0 interface, and the compatibility with MIDI 1.0 is provided via the
rawmidi common layer. However, user may let the driver falling back
to the old MIDI 1.0 interface by a module option, too.

A UMP-capable rawmidi device can create the corresponding ALSA
sequencer client(s) to support the UMP Endpoint and UMP Group
connections. As a nature of ALSA sequencer, arbitrary connections
between clients/ports are allowed, and the ALSA sequencer core
performs the automatic conversions for the connections between a new
UMP sequencer client and a legacy MIDI 1.0 sequencer client. It
allows the existing application to use MIDI 2.0 devices without
changes.

The MIDI-CI, which is another major extension in MIDI 2.0, isn't
covered by this patch set. It would be implemented rather in
user-space.

Roughly speaking, the first half of this patch set is for extending
the rawmidi and USB-audio, and the second half is for extending the
ALSA sequencer interface.

The patch set is based on 6.4-rc2 kernel, but all patches can be
cleanly applicable on 6.2 and 6.3 kernels, too (while 6.1 and older
kernels would need minor adjustment for uapi header changes).

The updates for alsa-lib and alsa-utils will follow shortly later.

The author thanks members of MIDI Association OS/API Working Group,
especially Andrew Mee, for great helps for the initial design and
debugging / testing the drivers.

Link: https://lore.kernel.org/r/20230523075358.9672-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...