Merge tag 'v6.6.6' into dev-6.6

This is the 6.6.6 stable release

Signed-off-by: Joel Stanley <joel@jms.id.au>

KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers

commit dc158d23b33df9033bcc8e7117e8591dd2f9d125 upstream.

Before running a guest, the host process (e.g., QEMU) FP/VEC registers
ar

KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers

commit dc158d23b33df9033bcc8e7117e8591dd2f9d125 upstream.

Before running a guest, the host process (e.g., QEMU) FP/VEC registers
are saved if they were being used, similarly to when the kernel uses FP
registers. The guest values are then loaded into regs, and the host
process registers will be restored lazily when it uses FP/VEC.

KVM HV has a bug here: the host process registers do get saved, but the
user MSR bits remain enabled, which indicates the registers are valid
for the process. After they are clobbered by running the guest, this
valid indication causes the host process to take on the FP/VEC register
values of the guest.

Fixes: 34e119c96b2b ("KVM: PPC: Book3S HV P9: Reduce mtmsrd instructions required to save host SPRs")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231122025811.2973-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

powerpc: Hide empty pt_regs at base of the stack

[ Upstream commit d45c4b48dafb5820e5cc267ff9a6d7784d13a43c ]

A thread started via eg. user_mode_thread() runs in the kernel to begin
with and then m

powerpc: Hide empty pt_regs at base of the stack

[ Upstream commit d45c4b48dafb5820e5cc267ff9a6d7784d13a43c ]

A thread started via eg. user_mode_thread() runs in the kernel to begin
with and then may later return to userspace. While it's running in the
kernel it has a pt_regs at the base of its kernel stack, but that
pt_regs is all zeroes.

If the thread oopses in that state, it leads to an ugly stack trace with
a big block of zero GPRs, as reported by Joel:

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3
Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV
Call Trace:
[c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable)
[c0000000036afb30] [c00000000013c524] panic+0x178/0x424
[c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324
[c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344
[c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac
[c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
NIP: 0000000000000000 LR: 0000000000000000 CTR: 0000000000000000
REGS: c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129e3de-dirty)
MSR: 0000000000000000 <> CR: 00000000 XER: 00000000
CFAR: 0000000000000000 IRQMASK: 0
GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
NIP [0000000000000000] 0x0
LR [0000000000000000] 0x0
--- interrupt: 0

The all-zero pt_regs looks ugly and conveys no useful information, other
than its presence. So detect that case and just show the presence of the
frame by printing the interrupt marker, eg:

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
Call Trace:
[c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable)
[c000000003aabb30] [c00000000014c624] panic+0x178/0x424
[c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324
[c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344
[c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac
[c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0

To avoid ever suppressing a valid pt_regs make sure the pt_regs has a
zero MSR and TRAP value, and is located at the very base of the stack.

Fixes: 6895dfc04741 ("powerpc: copy_thread fill in interrupt frame marker and back chain")
Reported-by: Joel Stanley <joel@jms.id.au>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230824064210.907266-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Extend KCSAN support to 32-bit and BookE. Add some KCSAN anno

Merge tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations

- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
use the -mprofile-kernel option (kernel specific ftrace ABI) for big
endian ELFv2 kernels

- Add initial Dynamic Execution Control Register (DEXCR) support, and
allow the ROP protection instructions to be used on Power 10

- Various other small features and fixes

Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.

* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
powerpc: remove checks for binutils older than 2.25
powerpc: Fail build if using recordmcount with binutils v2.37
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
powerpc/iommu: Only build sPAPR access functions on pSeries
powerpc: powernv: Annotate data races in opal events
powerpc: Mark writes registering ipi to host cpu through kvm and polling
powerpc: Annotate accesses to ipi message flags
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
powerpc: qspinlock: Mark accesses to qnode lock checks
powerpc/powernv/pci: Remove last IODA1 defines
powerpc/powernv/pci: Remove MVE code
powerpc/powernv/pci: Remove ioda1 support
powerpc: 52xx: Make immr_id DT match tables static
powerpc: mpc512x: Remove open coded "ranges" parsing
powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
powerpc: fsl: Use of_property_read_reg() to parse "reg"
powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
macintosh: Use of_property_read_reg() to parse "reg"
...

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

powerpc/dexcr: Support userspace ROP protection

The ISA 3.1B hashst and hashchk instructions use a per-cpu SPR HASHKEYR
to hold a key used in the hash calculation. This key should be different
for e

powerpc/dexcr: Support userspace ROP protection

The ISA 3.1B hashst and hashchk instructions use a per-cpu SPR HASHKEYR
to hold a key used in the hash calculation. This key should be different
for each process to make it harder for a malicious process to recreate
valid hash values for a victim process.

Add support for storing a per-thread hash key, and setting/clearing
HASHKEYR appropriately.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-6-bgray@linux.ibm.com

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Add support for building the kernel using PC-relative address

Merge tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

- Add support for building the kernel using PC-relative addressing on
Power10.

- Allow HV KVM guests on Power10 to use prefixed instructions.

- Unify support for the P2020 CPU (85xx) into a single machine
description.

- Always build the 64-bit kernel with 128-bit long double.

- Drop support for several obsolete 2000's era development boards as
identified by Paul Gortmaker.

- A series fixing VFIO on Power since some generic changes.

- Various other small features and fixes.

Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.

* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
powerpc/64s: Disable pcrel code model on Clang
powerpc: Fix merge conflict between pcrel and copy_thread changes
powerpc/configs/powernv: Add IGB=y
powerpc/configs/64s: Drop JFS Filesystem
powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
powerpc/configs: Make pseries_le an alias for ppc64le_guest
powerpc/configs: Incorporate generic kvm_guest.config into guest configs
powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
powerpc/configs/64s: Enable Device Mapper options
powerpc/configs/64s: Enable PSTORE
powerpc/configs/64s: Enable VLAN support
powerpc/configs/64s: Enable BLK_DEV_NVME
powerpc/configs/64s: Drop REISERFS
powerpc/configs/64s: Use SHA512 for module signatures
powerpc/configs/64s: Enable IO_STRICT_DEVMEM
powerpc/configs/64s: Enable SCHEDSTATS
powerpc/configs/64s: Enable DEBUG_VM & other options
powerpc/configs/64s: Enable EMULATED_STATS
powerpc/configs/64s: Enable KUNIT and most tests
...

show more ...

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

powerpc: copy_thread don't set PPR in user interrupt frame regs

syscalls do not set the PPR field in their interrupt frame and
return from syscall always sets the default PPR for userspace,
so setti

powerpc: copy_thread don't set PPR in user interrupt frame regs

syscalls do not set the PPR field in their interrupt frame and
return from syscall always sets the default PPR for userspace,
so setting the value in the ret_from_fork frame is not necessary
and mildly inconsistent. Remove it.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-9-npiggin@gmail.com

show more ...