Merge tag 'v6.6.18' into dev-6.6

This is the 6.6.18 stable release

parisc: Fix random data corruption from exception handler

commit 8b1d72395635af45410b66cc4c4ab37a12c4a831 upstream.

The current exception handler implementation, which assists when accessing
user s

parisc: Fix random data corruption from exception handler

commit 8b1d72395635af45410b66cc4c4ab37a12c4a831 upstream.

The current exception handler implementation, which assists when accessing
user space memory, may exhibit random data corruption if the compiler decides
to use a different register than the specified register %r29 (defined in
ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another
register, the fault handler will nevertheless store -EFAULT into %r29 and thus
trash whatever this register is used for.
Looking at the assembly I found that this happens sometimes in emulate_ldd().

To solve the issue, the easiest solution would be if it somehow is
possible to tell the fault handler which register is used to hold the error
code. Using %0 or %1 in the inline assembly is not posssible as it will show
up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not
convert to an integer.

This patch takes another, better and more flexible approach:
We extend the __ex_table (which is out of the execution path) by one 32-word.
In this word we tell the compiler to insert the assembler instruction
"or %r0,%r0,%reg", where %reg references the register which the compiler
choosed for the error return code.
In case of an access failure, the fault handler finds the __ex_table entry and
can examine the opcode. The used register is encoded in the lowest 5 bits, and
the fault handler can then store -EFAULT into this register.

Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT
config option any longer.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.6' into dev-6.6

This is the 6.6.6 stable release

Signed-off-by: Joel Stanley <joel@jms.id.au>

parisc: Mark ex_table entries 32-bit aligned in uaccess.h

commit a80aeb86542a50aa8521729ea4cc731ee7174f03 upstream.

Add an align statement to tell the linker that all ex_table entries and as
such t

parisc: Mark ex_table entries 32-bit aligned in uaccess.h

commit a80aeb86542a50aa8521729ea4cc731ee7174f03 upstream.

Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge branch 'topic/cs35l41' into for-next

Pull CS35L41 codec updates

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-intel-next

To catch up with recent rounds of pull requests
and get some drm-misc dependencies so we can merge
linux/string_helpers related changes.

Signed-off-by: Rodrig

Merge drm/drm-next into drm-intel-next

To catch up with recent rounds of pull requests
and get some drm-misc dependencies so we can merge
linux/string_helpers related changes.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus one new
device ID for an x86 laptop. Nothing that really stands out with
particularly big impact outside of the affected device.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the 5.18 fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branches 'fixes' and 'misc' into for-linus

Merge branch 'next' into for-linus

Prepare input updates for 5.18 merge window.

Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-gene

Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:

- The set_fs()/get_fs() infrastructure gets removed for good.

This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.

- The nds32 architecture ends its tenure in the Linux kernel.

The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.

- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"

* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...

show more ...

Merge branch 'for-5.18/apple' into for-linus

- Apple magic keyboard support improvements for newer models (José Expósito)
- Apple T2 Macs support improvements (Aun-Ali Zaidi, Paul Pawlowski)

Merge branch 'for-5.18/amd-sfh' into for-linus

- dead code elimination (Christophe JAILLET)

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes that went thru perf/urgent and now are fixed by an
upcoming patch.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redha

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes that went thru perf/urgent and now are fixed by an
upcoming patch.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'for-5.18/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture updates from Helge Deller:

- add vDSO support (allows us to use non-exec

Merge tag 'for-5.18/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture updates from Helge Deller:

- add vDSO support (allows us to use non-executable stacks)

- many TLB and cache flush optimizations (by Dave Anglin)

- fix handling of probe non-access faults (by Dave Anglin)

- fix invalidate/flush vmap routines (by Dave Anglin)

- avoid using hardware single-step in kprobes

- enable ARCH_HAS_DEBUG_VM_PGTABLE

- many cleanups in unaligned handlers, e.g. rewrite of existing
assembly code

- always use the self-extracting kernel feature

- big refacturing and code reductions regarding space-register usage in
get_user() and put_user()

- add fillrect() support to stifb graphics driver

* tag 'for-5.18/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (23 commits)
parisc: Fix invalidate/flush vmap routines
parisc: Avoid flushing cache on cache-less machines
parisc: Avoid using hardware single-step in kprobes
parisc: Improve CPU socket and core bootup info text
parisc: Enable ARCH_HAS_DEBUG_VM_PGTABLE
parisc: Avoid calling SMP cache flush functions on cache-less machines
parisc: Increase parisc_cache_flush_threshold setting
parisc/unaligned: Enhance user-space visible output
parisc/unaligned: Rewrite 32-bit inline assembly of emulate_sth()
parisc/unaligned: Rewrite 32-bit inline assembly of emulate_ldd()
parisc/unaligned: Rewrite inline assembly of emulate_ldw()
parisc/unaligned: Rewrite inline assembly of emulate_ldh()
parisc/unaligned: Use EFAULT fixup handler in unaligned handlers
parisc: Reduce code size by optimizing get_current() function calls
parisc: Use constants to encode the space registers like SR_KERNEL
parisc: Use SR_USER and SR_KERNEL in get_user() and put_user()
parisc: Add defines for various space register
parisc: Always use the self-extracting kernel feature
video/fbdev/stifb: Implement the stifb_fillrect() function
parisc: Add vDSO support
...

show more ...

Merge branch 'edac-amd64' into edac-updates-for-v5.18

Signed-off-by: Borislav Petkov <bp@suse.de>

Merge tag 'spi-nor/for-5.18' into mtd/next

SPI NOR core changes:
- move vendor specific code out of the core into vendor drivers.
- unify all function and object names in the vendor modules.
- make

Merge tag 'spi-nor/for-5.18' into mtd/next

SPI NOR core changes:
- move vendor specific code out of the core into vendor drivers.
- unify all function and object names in the vendor modules.
- make setup() callback optional to improve readability.
- skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

show more ...