Merge tag 'v6.6.64' into for/openbmc/dev-6.6

This is the 6.6.64 stable release

arm64: dts: ti: k3-j721s2: Fix clock IDs for MCSPI instances

[ Upstream commit 891874f015e98f67ab2fda76f2e859921e136621 ]

The clock IDs for multiple MCSPI instances across wakeup domain
in J721s2 a

arm64: dts: ti: k3-j721s2: Fix clock IDs for MCSPI instances

[ Upstream commit 891874f015e98f67ab2fda76f2e859921e136621 ]

The clock IDs for multiple MCSPI instances across wakeup domain
in J721s2 are incorrect when compared with documentation [1]. Fix the
clock IDs to their appropriate values.

[1]https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j721s2/clocks.html

Fixes: 04d7cb647b85 ("arm64: dts: ti: k3-j721s2: Add MCSPI nodes")

Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Link: https://lore.kernel.org/r/20241023104532.3438851-4-a-dutta@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, main

Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.

Only a few new SoC got added:

- TI AM62P5, a variant of the existing Sitara AM62x family

- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.

- Qualcomm ipq5018 is used in wireless access points

- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.

In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.

Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"

* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v6.6

New Boards:
- TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL ca

Merge tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v6.6

New Boards:
- TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL carrier board
- TI's AM62P5 Starter Kit (SK)

New features:
AM625:
- Support for Display (parallel only) - hdmi+audio support for
AM625-SK/BeaglePlay, TC358778 DPI to MIPI-DSI bridge support
for verdin.
- MCU MCAN support and enable of Toradex Verdin
- Toradex Verdin Dahlia audio support
AM62A7:
- MCU MCAN support
- Enable USB Dual Role Device(DRD) support for AM62A7
Starter Kit(SK).
AM64:
- TQ group's tqma64xxl: Overlays for SD-card and wlan.
J721E:
- Main domain CPSW9G and correponding gateway/ethernet
switch expansion - GESI board.
J721S2/AM68:
- New CAN instances, ehrpwm, Display (DSS) and am68-sk HDMI support
- Main domain CPSW2G and correponding gateway/ethernet
switch expansion - GESI board.
J784S4/AM69:
- Boot phase tag marking in device tree
- UFS support

Cleanups and non-urgent fixes:
- Cosmetic style fixups around "=" and "{" whitespace usage.
- Fixups across multiple SoCs/boards for pwm-tbclk to matchup with
bindings
- Serdes header file include/dt-bindings/mux/ti-serdes.h is now
deprecated, use k3-serdes.h in soc dtsi folder.
- All SoCs: Enable GPIO/SDHCI/OSPI/TSADC/C6/C7 DSP nodes at the
board level.
- Fixups for AM62: Crypto powerdomains are conditional to better
represent control of the crypto engines by security controller.
- Fixups for j721e: Duplicate wakeup_i2c node dropped for SoM board.
- Fixups for j721s2/am68: pimux offsets for OSPI.
- Fixups for j784s4/am69: Fixups for pinmux for ospi/adc interrupt
ranges for wkup/main gpios

* tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (68 commits)
arm64: dts: ti: verdin-am62: Add DSI display support
arm64: dts: ti: Add support for the AM62P5 Starter Kit
arm64: dts: ti: Introduce AM62P5 family of SoCs
dt-bindings: arm: ti: Add bindings for AM62P5 SoCs
arm64: dts: ti: k3-am69-sk: Add phase tags marking
arm64: dts: ti: k3-j784s4-evm: Add phase tags marking
arm64: dts: ti: k3-j784s4: Add phase tags marking
arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
arm64: dts: ti: k3-am62-main: Add node for DSS
arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level
arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-*: fix fss node dtbs check warnings
arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level
...

Link: https://lore.kernel.org/r/20230814160651.frxohyshd2evp2k4@expenses
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: ti: k3-j721s2: Enable GPIO nodes at the board level

GPIO nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmu

arm64: dts: ti: k3-j721s2: Enable GPIO nodes at the board level

GPIO nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.

Disable the GPIO nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-10-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3-j721s2: Enable SDHCI nodes at the board level

SDHCI nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and will not be functional unless they are extended.

As th

arm64: dts: ti: k3-j721s2: Enable SDHCI nodes at the board level

SDHCI nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and will not be functional unless they are extended.

As the attached SD/eMMC is only known about at the board integration level,
these nodes should only be enabled when provided with this information.

Disable the SDHCI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-4-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3: Add cfg reg region to ringacc node

Add register range of ringacc cfg node to all k3 SoC dtsi files. This is
normally under Device Management firmware control but some entities li

arm64: dts: ti: k3: Add cfg reg region to ringacc node

Add register range of ringacc cfg node to all k3 SoC dtsi files. This is
normally under Device Management firmware control but some entities like
bootloader have to access directly and thus required to be present in DT.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230809175932.2553156-3-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

arm64: dts: ti: k3-j721s2-main: Add DSS node

Add DSS node for J721S2 SoC. DSS IP in J721S2 is
same as DSS IP in J721E, so same compatible is used.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.co

arm64: dts: ti: k3-j721s2-main: Add DSS node

Add DSS node for J721S2 SoC. DSS IP in J721S2 is
same as DSS IP in J721E, so same compatible is used.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230803081800.368582-2-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node

TI's J721S2 SoC has a MAIN CPSW2G instance of the CPSW Ethernet Switch.
Add devicetree node for it.

Signed-off-by: Kishon Vijay Abrah

arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node

TI's J721S2 SoC has a MAIN CPSW2G instance of the CPSW Ethernet Switch.
Add devicetree node for it.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20230726065407.378455-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

arm64: dts: ti: k3-j721s2-main: Add dts nodes for EHRPWMs

Add dts nodes for 6 EHRPWM instances on SoC. Disable EHRPWM nodes in the
dtsi files and only enable the ones that are actually pinned out on

arm64: dts: ti: k3-j721s2-main: Add dts nodes for EHRPWMs

Add dts nodes for 6 EHRPWM instances on SoC. Disable EHRPWM nodes in the
dtsi files and only enable the ones that are actually pinned out on a
given board in the board dts file.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Link: https://lore.kernel.org/r/20230721082150.12599-1-sinthu.raja@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files,

Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.

The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.

There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.

- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.

- Amlogic C3 is a Cortex-A35 based smart IP camera chip

- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.

- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.

- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.

All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:

- Marantec Maveo board based on dhcor imx6ull module

- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

- Epson Moverio BT-200 AR glasses based on TI OMAP4

- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

- ICnova ADB4006 board based on Allwinner A20

On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:

- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.

- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)

- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards

Other changes to existing boards contain the usual minor improvements
along with

- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names

- support for devicetree overlays on at91, bcm283x

- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1

As usual, a lot more detail is available in the individual merge
commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...

show more ...

Merge tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v6.5

New Boards:
phyBOARD-Lyra-AM625 Board support
Toradex Verdin

Merge tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v6.5

New Boards:
phyBOARD-Lyra-AM625 Board support
Toradex Verdin AM62 COM, carrier and dev boards

New features:
Across K3 SoCs:
- Error Signaling Module(ESM) and Secproxy IPC modules
- On board I2C EEPROM
- Voltage Temp Monitoring (VTM) module
- DM timers (GP Timers)
J784s4:
- R5 and C7x DSP remoteproc, ADC, QSPI
AM69:
- Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al
J721s2:
- USB, Serdes, OSPI, PCIe
AM62a:
- Watchdog
J721e:
- HyperFlash/HyperBus
AM62:
- Type-C USB0 port

Cleanups and non-urgent fixes
Particularly large set of cleanups to get rid of dtbs_check errors and
dtc warnings:
- Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A,
J721e, J7200 that are used by bootloader
- Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4
- Drop bootargs and unneeded aliases across all K3 SoCs
- Move aliases to board dts files from SoC dtsi files
- Move to generic node name for can, rtc nodes on am65
- s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update
- Fix pinctrl phandle references to use <> as separator where multiple
entries are present

* tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (153 commits)
arm64: dts: ti: Unify pin group node names for make dtbs checks
arm64: dts: ti: add verdin am62 yavia
arm64: dts: ti: add verdin am62 dahlia
arm64: dts: ti: add verdin am62
dt-bindings: arm: ti: add toradex,verdin-am62 et al.
arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625
dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware
arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename
arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-am64: Add ESM support
arm64: dts: ti: k3-am62: Add ESM support
arm64: dts: ti: k3-j7200: Add ESM support
arm64: dts: ti: k3-j721e: Add ESM support
dt-bindings: misc: esm: Add ESM support for TI K3 devices
arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux
arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom
arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux
arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header
arm64: dts: ti: k3-j721s2: Fix wkup pinmux range
...

Link: https://lore.kernel.org/r/7fe0c6de-cb99-9c89-8583-b3855fde16f8@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

arm64: dts: ti: k3-j721s2: Change CPTS clock parent

MAIN_PLL0 has a flag set in DM (Device Manager) that removes it's
capability to re-initialise clock frequencies. CPTS and RGMII has
MAIN_PLL3 as t

arm64: dts: ti: k3-j721s2: Change CPTS clock parent

MAIN_PLL0 has a flag set in DM (Device Manager) that removes it's
capability to re-initialise clock frequencies. CPTS and RGMII has
MAIN_PLL3 as their parent which does not have this flag. While RGMII
needs this reinitialisation to default frequency to be able to get
250MHz with its divider, CPTS can not get its required 200MHz with its
divider. Thus, move CPTS clock parent on J721S2 from MAIN_PLL3_HSDIV1 to
MAIN_PLL0_HSDIV6.

(Note: even GTC will be moved from MAIN_PLL3 to MAIN_PLL0 in U-Boot side
for the same reason)

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20230605110443.84568-1-n-francis@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-j721s2: Configure pinctrl for timer IO

There are timer IO pads in the MCU domain, and in the MAIN domain. These
pads can be muxed for the related timers.

The details of the multi

arm64: dts: ti: k3-j721s2: Configure pinctrl for timer IO

There are timer IO pads in the MCU domain, and in the MAIN domain. These
pads can be muxed for the related timers.

The details of the multiplexing can be found in the register
documentation and Technical Reference Manual[1].

These are similar to J721e/J7200, but have different mux capabilities.

[1] https://www.ti.com/lit/zip/spruj28

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-j721s2: Add general purpose timers

There are 20 general purpose timers on j721s2 that can be used for
things like PWM using pwm-omap-dmtimer driver. There are also
additional ten

arm64: dts: ti: k3-j721s2: Add general purpose timers

There are 20 general purpose timers on j721s2 that can be used for
things like PWM using pwm-omap-dmtimer driver. There are also
additional ten timers in the MCU domain which are meant for MCU
firmware usage and hence marked reserved by default.

Though the count is similar to J721e/J7200, the device IDs and clocks
used in j721s2 are different with the option of certain clocks having
options of additional clock muxes. Since there is very minimal reuse,
it is cleaner to integrate as part of SoC files itself. The defaults
are configured for clocking the timers from system clock(HFOSC0).

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...