Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios

[ Upstream commit 584a327c5cffc36369b2a8953d9448826240f1ac ]

Bindings allow a "wake", not "enable", GPIO. Schematics also use WAKE
name for

arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios

[ Upstream commit 584a327c5cffc36369b2a8953d9448826240f1ac ]

Bindings allow a "wake", not "enable", GPIO. Schematics also use WAKE
name for the pin:

sdm845-db845c.dtb: pcie@1c00000: Unevaluated properties are not allowed ('enable-gpio' was unexpected)

Fixes: 4a657c264b78 ("arm64: dts: qcom: db845c: Enable PCIe controllers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240108131216.53867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.14' into dev-6.6

This is the 6.6.14 stable release

arm64: dts: qcom: sdm845-db845c: correct LED panic indicator

[ Upstream commit 0c90c75e663246203a2b7f6dd9e08a110f4c3c43 ]

There is no "panic-indicator" default trigger but a property with that
name

arm64: dts: qcom: sdm845-db845c: correct LED panic indicator

[ Upstream commit 0c90c75e663246203a2b7f6dd9e08a110f4c3c43 ]

There is no "panic-indicator" default trigger but a property with that
name:

sdm845-db845c.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)

Fixes: 3f72e2d3e682 ("arm64: dts: qcom: Add Dragonboard 845c")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111095617.16496-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, main

Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.

Only a few new SoC got added:

- TI AM62P5, a variant of the existing Sitara AM62x family

- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.

- Qualcomm ipq5018 is used in wireless access points

- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.

In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.

Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"

* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.6

Initial support for the SM4450 platform and the Q

Merge tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.6

Initial support for the SM4450 platform and the QRD device thereon is
added.

The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.

A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based
LEDs and buttons.

On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.

On MSM8916, the D3 camera mezzanine is improved and refactored out to
its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with
charger, while Samsung Galaxy J5 and E5 gains touchscreen support.

A few fixes for MSM8939 are introduced, and initial support for Samsung
Galaxy A7 is add.

Support for scaling the cache bus fabric is introduced on MSM8996. A
missing interrupt for the USB2 controller is added. The touchscreen vio
supply on Xiaomi Mi 5 is corrected, and a few other cleanups are
introduces across other devices.

The display controller is introduced for MSM8998, a few clock fixes are
introduced and missing power domains are added for the multimedia
subsystem iommu.

Reserved memory-regions and reserved GPIO lists are updated for the
QDU/QRU1000 IDPs.

USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is
enabled for the RB2.

PCIe and Ethernet support is introduced on SA8775P, and enabled for the
Ride board.

On SC7180 the PSCI integration is refactored, to allow supporting
devices with the Qualcomm firmware. BWMON is introduced, alongside the
CPUfreq-based bus voting.

A number of fixes are added for SC8180X, on the Primus and Lenovo Flex
5G devices pmic_glink is introduced and wired up, to provide support for
external display.

Missing SCM interconnect is added to SC8280XP, and the PDC is marked as
wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is
corrected and a few regulators are renamed to align with schematics. The
Lenovo Thinkpad X13s gains camera activity LED and a set of previously
reserved GPIOs are released. The SA8540P Ride platform gains RTC
support.

For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced
and wired up as wakeup-parent of the TLMM.

On SDM845 the UFS controller gains interconnect path description,
power-domain information is added to GCC and minimum frequency of the
UFS ICE is corrected. On RB3 continuous splash memory region is
described, and the camera subsystem is enabled. On the Lenovo Yoga C630
a missing power supply for the display panel is added, and the debug
UART is introduced.

SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75
PMIC is described and added to the IDP.

GPU description is added to SM6115, and together with display enabled on
the Lenovo Tab P11.

On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU
is added, and the PDC is registered as wakeup-parent of TLMM.

L3 cache scaling is introduced on SM6375.

The DSI PHY compatible and an interrupt for I2C7 are corrected for
SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.

On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node
gains interconnect paths, SMMU is marked as DMA coherent and dynamic
power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line
names are updated.

On SM8350 missing cluster sleep states and LMH interrupts are added,
the CPU compatibles are corrected and APR and LPASS pinctrl support is
introduced. The HDK gains uSD card support and PMK8350 is added.

For SM8450 support for RNG and RPMh stats are added, the ICE handling is
extracted from the UFS node and the display subsystem gains a missing
interconnect path. Thermal description is improved for the HDK.

On SM8550 MTP and QRD the pmic_glink is introduced, to provide
DisplayPort output. A missing regulator supply is also added.

A few platforms that happens to share the RPMH power-domain resource
identifier constants are migrated to new generic defines. ADC channel
names are generalized on various PMICs.

A variety of devices gain chassis-type, and the GIC_SPI constant is
replacing the 0 across a few different platforms.

* tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (215 commits)
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen
arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration
arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins
arm64: dts: qcom: msm8998: Add DPU1 nodes
arm64: dts: qcom: msm8996: Fix dsi1 interrupts
arm64: dts: qcom: sdx75-idp: Add regulator nodes
arm64: dts: qcom: sdx75: Add rpmhpd node
arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
arm64: dts: qcom: Add pmx75 PMIC dtsi
arm64: dts: qcom: Add pm7550ba PMIC dtsi
arm64: dts: qcom: Add pinctrl gpio support for pm7250b
arm64: dts: qcom: sdx75: Add spmi node
arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU
...

Link: https://lore.kernel.org/r/20230819034551.2537866-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved

Adding a reserved memory region for the framebuffer memory
(the splash memory region set up by the bootloader).

It fixes

arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved

Adding a reserved memory region for the framebuffer memory
(the splash memory region set up by the bootloader).

It fixes a kernel panic (arm-smmu: Unhandled context fault
at this particular memory region) reported on DB845c running
v5.10.y.

Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230726132719.2117369-2-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sdm845: Enable CAMSS on the bare rb3 board

Enable CAMSS on the standard RB3 as it is possible to run the test pattern
generator (TPG) without any populated ports/endpoints.

media-

arm64: dts: qcom: sdm845: Enable CAMSS on the bare rb3 board

Enable CAMSS on the standard RB3 as it is possible to run the test pattern
generator (TPG) without any populated ports/endpoints.

media-ctl --reset
yavta --no-query -w '0x009f0903 9' /dev/v4l-subdev4
yavta --list /dev/v4l-subdev4
media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SGRBG10_1X10/3280x2464]'
media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SGRBG10_1X10/3280x2464]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
media-ctl -d /dev/media0 -p
yavta -B capture-mplane --capture=5 -n 5 -I -f SGRBG10P -s 3280x2464 --file=TPG-SGRBG10-3280x2464-000-#.bin /dev/video2

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230809203534.1100030-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files,

Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.

The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.

There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.

- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.

- Amlogic C3 is a Cortex-A35 based smart IP camera chip

- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.

- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.

- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.

All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:

- Marantec Maveo board based on dhcor imx6ull module

- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

- Epson Moverio BT-200 AR glasses based on TI OMAP4

- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

- ICnova ADB4006 board based on Allwinner A20

On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:

- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.

- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)

- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards

Other changes to existing boards contain the usual minor improvements
along with

- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names

- support for devicetree overlays on at91, bcm283x

- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1

As usual, a lot more detail is available in the individual merge
commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...

show more ...

Merge tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

More Qualcomm ARM64 DTS changes for v6.5

This introduces support for the Qualcomm SDX75 pl

Merge tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

More Qualcomm ARM64 DTS changes for v6.5

This introduces support for the Qualcomm SDX75 platform, with the IDP
reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the
RDP454 is introduced.
On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added.

For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added
to the CPU cluster power-domain to flush sleep & wake votes as the
cluster goes down.

On IPQ5332 additional reserved-memory regions to improve post mortem
debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the
RDP474 is added.

On IPQ8074 critical thermal trip points are defined.

As with IPQ5332 additional reserved-memory regions are used to improve
post mortem debugging. Thermal sensors (tsens) are added and zones
defined. The crypto engine is added, and support for the RDP454 board is
added.

Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and
the purpose of msm8939-pm8916 is documented. MSM8939 has regulator
definitions cleaned up, following to the previous effort on MSM8916.

CPU Bus Fabric scaling support is added to MSM8996 Pro.

On QCM2290 CPU idle states are added.

For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC
support. IMEM and PIL information regions are defined for improved post
mortem debugging.

The Qualcomm Robotics RB2 kit gets its on-board buttons described.

A few fixes are introduced for the newly merged SC8180X, in particluar
the DisplayPort blocks are moved to the MMCX power domain to avoid power
being reduced prematurely during boot.

The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s,
and resets for the soundwire controllers are added. The OUI is
specified for ethernet phys on SA8540P Ride platform, to avoid reset
issues.

Charger description is added to the PMI8998 PMIC and enabled across
OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1.

On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU
clock controller and IOMMU definitions.

The Fairphone FP4 gains Bluetooth support.

SM8150 is transitioned to use 2 interconnect-cells, and the USB
interconnect path is described to ensure buses are adequately voted for.

The same changes are done for SM8250, and the resolution of the
static framebuffer on Sony Xperia 1 II and 5 II are corrected.

The USB bus paths are also added to SM8350, SM8450 and SM8550.

On SM8550 DisplayPort nodes are added, as is the PWM controller for
driving the notification LED and the RTC is enabled. For the MTP and QRD
boards, the soundcard and audio codecs are defined.

A Tegra change, related to LP855X binding changes, was accidentally
picked up and dropped again later.

A number of DeviceTree fixes identified through validation was
introduced as well. Additionally a few nodes got their default status
changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu
node).

* tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits)
Revert "arm64: dts: adapt to LP855X bindings changes"
arm64: dts: qcom: sc8280xp: Enable GPU related nodes
arm64: dts: qcom: sc8280xp: Add GPU related nodes
arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators
arm64: dts: qcom: msm8939: Define regulator constraints next to usage
arm64: dts: qcom: msm8939-pm8916: Clarify purpose
arm64: dts: qcom: msm8939: Fix regulator constraints
arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6
arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages
arm64: dts: qcom: msm8939: Disable lpass_codec by default
arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies
arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons
arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi
arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl
arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl
arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl
arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl
arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl
arm64: dts: qcom: msm8996: rename labels for HDMI nodes
arm64: dts: qcom: sm8250: rename labels for DSI nodes
...

Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.5

This introduces the RDP442 and RDP433 reference d

Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.5

This introduces the RDP442 and RDP433 reference devices on IPQ5332 and
IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574
are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is
added. Support for Acer Apire 1, built on the Snapdragon 7c platform is
introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating
support for SC8180X and the Lenovo Flex 5G, and the Primus reference
device, has been added.

On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described
above the RDP442 board on the prior. Download mode support and various
reserved-memory regions are also introduced on IPQ6018.
IPQ8074 gains another SPI controller.

On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog,
qfprom, SMEM and RPM are introduced. As are support for four new board,
mentioned above.

MSM8916 gains a range of structural improvements, to better suite the
various boards supported. Regulator constraints are corrected and their
states are adjusted to match reality (e.g. always-on regulators marked
as always-on). BQ Aquaris X5 gains support for front flash LED.

As mentioned above, MSM8939 support is introduced with support for
boards from Sony and Square.

MSM8953 gains DMA support in I2C masters.

MSM8996-based Sony Xperia boards gains description of their RGB
notification LED.

On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU,
AOSS, watchdog and missing low-speed controllers are added. On the Ride
platform UFS, USB and an i2c bus are enabled.

iommu properties are added to QSPI on both SC7180 and SC7280. LPASS
clocks are adjusted and MDP node cleaned up slightly, on SC7180. As
mentioned above, support for Acer Aspire 1 is introduced.

Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the
Primus reference device has been merged.

On SC8280XP ethernet is added and enabled on the automotive ride
platform. An SDC controller is introduced and enabled on the SC8280XP
CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB
SuperSpeed phy is added to the Type-C graph, to enable support for
orientation switching.

Fairphone 3 gains support for its notification LED.

On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains
support for flash LED and the RB3 (DB845c) board gains support for
bonded/dual DSI-mode, to allow 4k output.

On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY
are introduced. As mentioned above Fxtec Pro1X is introduced. On the
QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display,
CAN-bus and GPIO LEDs are introduced, fixed regulators are described and
the SD-card description is corrected.

Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5
gains SD-card support, camera regulators and GPIO line names sorted out.

SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5
II gains support for hardware video accelerator.

Crypto engine is introduced for SM8350 as well. The HDK gets the USB
Type-C graph described for Superspeed orientation switching and
DisplayPort output.

On SM8450 video clock controller and crypto engine are added, missing
opp levels are introduced and the USB Type-C graph is defined for
orientation switching and altmode.

SM8550 gains GPU and video clock controllers and missing opp levels are
added. The WCD9385 audio codec is added for the SM8550 MTP and on the
QRD PCIe, USB, audio display and flash LED are added.

* tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits)
arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G
arm64: dts: qcom: sc8180x: Introduce Primus
arm64: dts: qcom: sc8180x: Add pmics
arm64: dts: qcom: sc8180x: Add display and gpu nodes
arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes
arm64: dts: qcom: sc8180x: Add PCIe instances
arm64: dts: qcom: sc8180x: Add QUPs
arm64: dts: qcom: sc8180x: Add thermal zones
arm64: dts: qcom: sc8180x: Add interconnects and lmh
arm64: dts: qcom: Introduce the SC8180x platform
arm64: dts: qcom: msm8916: Move aliases to boards
arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec
arm64: dts: qcom: msm8916/39: Clean up MDSS labels
arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl
arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN
arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
arm64: dts: qcom: qrb4210-rb2: Enable USB node
arm64: dts: qcom: sm6115: Add USB SS qmp phy node
arm64: dts: qcom: ipq5332: add support for the RDP442 variant
dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family
...

Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

arm64: dts: qcom: sdm845: rename labels for DSI nodes

Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
al

arm64: dts: qcom: sdm845: rename labels for DSI nodes

Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.

To keep all display-related nodes close in the board files, change DSI
node labels from dsi_* to mdss_dsi_*.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-12-dmitry.baryshkov@linaro.org

show more ...

arm64: dts: qcom: pmi8998: enable rradc by default

There is no need for the RRADC to be disabled by default,
lets just enable it by default and not clutter up DT.

Acked-by: Konrad Dybcio <konrad.dy

arm64: dts: qcom: pmi8998: enable rradc by default

There is no need for the RRADC to be disabled by default,
lets just enable it by default and not clutter up DT.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524-pmi8998-charger-dts-v2-1-2a5c77d2ff0c@linaro.org

show more ...

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4