Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

arm64: dts: qcom: sc7180: Bring back cpufreq-based DDR votes

ChromeOS folks reported that bwmon is too slow and getting rid of
statically defined CPUFREQ-based votes (effectively floor votes because

arm64: dts: qcom: sc7180: Bring back cpufreq-based DDR votes

ChromeOS folks reported that bwmon is too slow and getting rid of
statically defined CPUFREQ-based votes (effectively floor votes because of
how opp-peak-kBps is interpreted), has a major performance impact in some
common applications. Bring them back until MEMLAT support is introduced.

This is a partial revert of the commit referenced in the fixes tag.

Fixes: adc16b84e1ea ("arm64: dts: qcom: sc7180: Hook up BWMONs")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-7180ddr-v1-1-56e4f13afe9b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sc7180: Hook up BWMONs

Hook up 2 out of 4 (the rest are for NPU) BWMONs exposed on the SC7180.
This allows for scaling DDR and LLCC independently from cpufreq.

Signed-off-by: Konr

arm64: dts: qcom: sc7180: Hook up BWMONs

Hook up 2 out of 4 (the rest are for NPU) BWMONs exposed on the SC7180.
This allows for scaling DDR and LLCC independently from cpufreq.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Nikita Travkin <nikita@trvn.ru> # Aspire 1
Link: https://lore.kernel.org/r/20230616-topic-sc7180_bwmons-v1-2-4ddb96f9a6cd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'v6.4' into rdma.git for-next

Linux 6.4

Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:

drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622

Merge tag 'v6.4' into rdma.git for-next

Linux 6.4

Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:

drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622115246.365d30ad@canb.auug.org.au

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Add Renesas PMIC RAA215300 and built-in RTC

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this

Add Renesas PMIC RAA215300 and built-in RTC

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.

The details of PMIC can be found here[1].

Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Rem

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <airlied@redhat.c

Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <airlied@redhat.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

include/linux/mlx5/driver.h
617f5db1a626 ("RDMA/mlx5: Fix affinity ass

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

include/linux/mlx5/driver.h
617f5db1a626 ("RDMA/mlx5: Fix affinity assignment")
dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/

tools/testing/selftests/net/mptcp/mptcp_join.sh
47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")
45b1a1227a7a ("mptcp: introduces more address related mibs")
0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

regmap: Merge up v6.4-rc6

The fix for maple tree RCU locking on sync is a dependency for the
block sync code for the maple tree.

Merge tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platform

Merge tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.

There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.

The DT fixes include:

- i.MX8 fixes for gpio, pinmux and clock settings

- ADS touchscreen gpio polarity settings in several machines

- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms

- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire

- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"

* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...

show more ...

Merge tag 'qcom-arm64-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm ARM64 DeviceTree fixes for 6.4

Register scheme for SM8550 LLCC is correcte

Merge tag 'qcom-arm64-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm ARM64 DeviceTree fixes for 6.4

Register scheme for SM8550 LLCC is corrected to avoid using the wrong
register offsets. SDRAM frequency for misidentified SC7180-lite boards
is handled. The datatype for Soundwire interval on SM8550 is corrected.

The resource controller on SC8280XP is added to the CPU cluster
power-domain to get notified to send cached sleep and wake votes before
going entering the lower power states.

SA8155P power-domains that differ from what's inherited from the SM8150
DeviceTree are adjusted to make the platform boot again.

Remoteproc firmware paths are corrected for Sony Xperia 10 IV.

Cache properties are adjusted across a range of platforms, to meet
changes in the binding.

Panel compatibles are corrected for Xiaomi Mi Pad 5 Pro, to match
binding. Invalid dai-cells are dropped from SC7280 devices, to match
binding.

The incorrect removal of "input-enable" from the LPASS pinctrl node of
SC8280XP was reverted, to get dmic pins in the correct state again.

The incorrect input-enable property is dropped from a msm8974, mdm9615
and apq8026 to resolve a range of DT validation warnings, incorrectly
picked up through the ARM64 tree.

* tag 'qcom-arm64-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
arm64: dts: qcom: add missing cache properties
arm64: dts: qcom: use decimal for cache level
arm64: dts: qcom: fix indentation
ARM: dts: qcom: msm8974: remove superfluous "input-enable"
ARM: dts: qcom: mdm9615: remove superfluous "input-enable"
ARM: dts: qcom: apq8026: remove superfluous "input-enable"
arm64: dts: qcom: sm8250-xiaomi-elish-csot: fix panel compatible
arm64: dts: qcom: sm8250-xiaomi-elish-boe: fix panel compatible
arm64: dts: qcom: sc7280-qcard: drop incorrect dai-cells from WCD938x SDW
arm64: dts: qcom: sc7280-idp: drop incorrect dai-cells from WCD938x SDW
arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes
arm64: dts: qcom: sc8280xp: Revert "arm64: dts: qcom: sc8280xp: remove superfluous "input-enable""

Link: https://lore.kernel.org/r/20230601142659.2246348-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards

In general, the three SKUs of sc7180 (lite, normal, and pro) are
handled dynamically.

The cpufreq table in sc7180.

arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards

In general, the three SKUs of sc7180 (lite, normal, and pro) are
handled dynamically.

The cpufreq table in sc7180.dtsi includes the superset of all CPU
frequencies. The "qcom-cpufreq-hw" driver in Linux shows that we can
dynamically detect which frequencies are actually available on the
currently running CPU and then we can just enable those ones.

The GPU is similarly dynamic. The nvmem has a fuse in it (see
"gpu_speed_bin" in sc7180.dtsi) that the GPU driver can use to figure
out which frequencies to enable.

There is one part, however, that is not so dynamic. The way SDRAM
frequency works in sc7180 is that it's tied to cpufreq. At the busiest
cpufreq operating points we'll pick the top supported SDRAM frequency.
They ramp down together.

For the "pro" SKU of sc7180, we only enable one extra cpufreq step.
That extra cpufreq step runs SDRAM at the same speed as the step
below. Thus, for normal and pro things are OK. There is no sc7180-pro
device tree snippet.

For the "lite" SKU if sc7180, however, things aren't so easy. The
"lite" SKU drops 3 cpufreq entries but can still run SDRAM at max
frequency. That messed things up with the whole scheme. This is why we
added the "sc7180-lite" fragment in commit 8fd01e01fd6f ("arm64: dts:
qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite").

When the lite scheme came about, it was agreed that the WiFi SKUs of
lazor would _always_ be "lite" and would, in fact, be the only "lite"
devices. Unfortunately, this decision changed and folks didn't realize
that it would be a problem. Specifically, some later lazor WiFi-only
devices were built with "pro" CPUs.

Building WiFi-only lazor with "pro" CPUs isn't the end of the world.
The SDRAM will ramp up a little sooner than it otherwise would, but
aside from a small power hit things work OK. One problem, though, is
that the SDRAM scaling becomes a bit quirky. Specifically, with the
current tables we'll max out SDRAM frequency at 2.1GHz but then
_lower_ it at 2.2GHz / 2.3GHz only to raise it back to max for 2.4GHz
and 2.55GHz.

Let's at least fix this so that the SDRAM frequency doesn't go down in
that quirky way. On true "lite" SKUs this change will be a no-op
because the operating points we're touching are disabled. This change
is only useful when a board that thinks it has a "lite" CPU actually
has a "normal" or "pro" one stuffed.

Fixes: 8fd01e01fd6f ("arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515171929.1.Ic8dee2cb79ce39ffc04eab2a344dde47b2f9459f@changeid

show more ...

Merge remote-tracking branch 'net/master'

Merge branch 'for-5.12/google' into for-linus

- User experience improvements for hid-google from Nicolas Boichat

Merge branch 'next' into for-linus

Prepare input updates for 5.12 merge window.

Merge tag 'v5.11' into next

Merge with mainline to get latest APIs and device tree bindings.

Merge tag 'amba-make-remove-return-void' of https://git.pengutronix.de/git/ukl/linux into devel-stable

Tag for adaptions to struct amba_driver::remove changing prototype

Merge branch 'cpuidle-fix' into fixes

Merge drm/drm-next into drm-intel-gt-next

Backmerging to get a common base for merging topic branches between
drm-intel-next and drm-intel-gt-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@l

Merge drm/drm-next into drm-intel-gt-next

Backmerging to get a common base for merging topic branches between
drm-intel-next and drm-intel-gt-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

sync-up to not fall too much behind.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>