Revision tags: v6.6.67, v6.6.66, v6.6.65, v6.6.64, v6.6.63, v6.6.62, v6.6.61, v6.6.60, v6.6.59, v6.6.58, v6.6.57, v6.6.56, v6.6.55, v6.6.54, v6.6.53, v6.6.52, v6.6.51, v6.6.50, v6.6.49, v6.6.48, v6.6.47, v6.6.46, v6.6.45, v6.6.44, v6.6.43, v6.6.42, v6.6.41, v6.6.40, v6.6.39, v6.6.38, v6.6.37, v6.6.36, v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31, v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3 |
|
#
c900529f |
| 12-Sep-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-fixes into drm-misc-fixes
Forwarding to v6.6-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v6.5.2, v6.1.51, v6.5.1 |
|
#
0e72db77 |
| 30-Aug-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann: "These are the devicetree updates for Arm and RISC-V based SoCs, main
Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann: "These are the devicetree updates for Arm and RISC-V based SoCs, mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55 SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone platform.
In total, 29 machines get added, which is low because of the summer break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST, Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits) arm64: dts: use capital "OR" for multiple licenses in SPDX ARM: dts: use capital "OR" for multiple licenses in SPDX arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved ARM: dts: qcom: apq8064: add support to gsbi4 uart riscv: dts: change TH1520 files to dual license riscv: dts: thead: add BeagleV Ahead board device tree dt-bindings: riscv: Add BeagleV Ahead board compatibles ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs ARM: dts: stm32: support display on stm32f746-disco board ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco ARM: dts: stm32: add pin map for LTDC on stm32f7 ARM: dts: stm32: add ltdc support on stm32f746 MCU arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC riscv: dts: starfive: fix jh7110 qspi sort order ...
show more ...
|
Revision tags: v6.1.50, v6.5, v6.1.49, v6.1.48 |
|
#
6522fbd4 |
| 21-Aug-2023 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.6
Initial support for the SM4450 platform and the Q
Merge tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.6
Initial support for the SM4450 platform and the QRD device thereon is added.
The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.
A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based LEDs and buttons.
On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.
On MSM8916, the D3 camera mezzanine is improved and refactored out to its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with charger, while Samsung Galaxy J5 and E5 gains touchscreen support.
A few fixes for MSM8939 are introduced, and initial support for Samsung Galaxy A7 is add.
Support for scaling the cache bus fabric is introduced on MSM8996. A missing interrupt for the USB2 controller is added. The touchscreen vio supply on Xiaomi Mi 5 is corrected, and a few other cleanups are introduces across other devices.
The display controller is introduced for MSM8998, a few clock fixes are introduced and missing power domains are added for the multimedia subsystem iommu.
Reserved memory-regions and reserved GPIO lists are updated for the QDU/QRU1000 IDPs.
USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is enabled for the RB2.
PCIe and Ethernet support is introduced on SA8775P, and enabled for the Ride board.
On SC7180 the PSCI integration is refactored, to allow supporting devices with the Qualcomm firmware. BWMON is introduced, alongside the CPUfreq-based bus voting.
A number of fixes are added for SC8180X, on the Primus and Lenovo Flex 5G devices pmic_glink is introduced and wired up, to provide support for external display.
Missing SCM interconnect is added to SC8280XP, and the PDC is marked as wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is corrected and a few regulators are renamed to align with schematics. The Lenovo Thinkpad X13s gains camera activity LED and a set of previously reserved GPIOs are released. The SA8540P Ride platform gains RTC support.
For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced and wired up as wakeup-parent of the TLMM.
On SDM845 the UFS controller gains interconnect path description, power-domain information is added to GCC and minimum frequency of the UFS ICE is corrected. On RB3 continuous splash memory region is described, and the camera subsystem is enabled. On the Lenovo Yoga C630 a missing power supply for the display panel is added, and the debug UART is introduced.
SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75 PMIC is described and added to the IDP.
GPU description is added to SM6115, and together with display enabled on the Lenovo Tab P11.
On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU is added, and the PDC is registered as wakeup-parent of TLMM.
L3 cache scaling is introduced on SM6375.
The DSI PHY compatible and an interrupt for I2C7 are corrected for SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.
On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node gains interconnect paths, SMMU is marked as DMA coherent and dynamic power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line names are updated.
On SM8350 missing cluster sleep states and LMH interrupts are added, the CPU compatibles are corrected and APR and LPASS pinctrl support is introduced. The HDK gains uSD card support and PMK8350 is added.
For SM8450 support for RNG and RPMh stats are added, the ICE handling is extracted from the UFS node and the display subsystem gains a missing interconnect path. Thermal description is improved for the HDK.
On SM8550 MTP and QRD the pmic_glink is introduced, to provide DisplayPort output. A missing regulator supply is also added.
A few platforms that happens to share the RPMH power-domain resource identifier constants are migrated to new generic defines. ADC channel names are generalized on various PMICs.
A variety of devices gain chassis-type, and the GIC_SPI constant is replacing the 0 across a few different platforms.
* tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (215 commits) arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins arm64: dts: qcom: msm8998: Add DPU1 nodes arm64: dts: qcom: msm8996: Fix dsi1 interrupts arm64: dts: qcom: sdx75-idp: Add regulator nodes arm64: dts: qcom: sdx75: Add rpmhpd node arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75 arm64: dts: qcom: Add pmx75 PMIC dtsi arm64: dts: qcom: Add pm7550ba PMIC dtsi arm64: dts: qcom: Add pinctrl gpio support for pm7250b arm64: dts: qcom: sdx75: Add spmi node arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU ...
Link: https://lore.kernel.org/r/20230819034551.2537866-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
Revision tags: v6.1.46, v6.1.45, v6.1.44 |
|
#
e99a7a0c |
| 07-Aug-2023 |
Rohit Agarwal <quic_rohiagar@quicinc.com> |
arm64: dts: qcom: Add pinctrl gpio support for pm7250b
Add pinctrl gpio dts node for pm7250b.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@lina
arm64: dts: qcom: Add pinctrl gpio support for pm7250b
Add pinctrl gpio dts node for pm7250b.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1691415534-31820-4-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
#
2612e3bb |
| 07-Aug-2023 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catching-up with drm-next and drm-intel-gt-next. It will unblock a code refactor around the platform definitions (names vs acronyms).
Signed-off-by: Rodrigo V
Merge drm/drm-next into drm-intel-next
Catching-up with drm-next and drm-intel-gt-next. It will unblock a code refactor around the platform definitions (names vs acronyms).
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
show more ...
|
#
9f771739 |
| 07-Aug-2023 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as a dependency for https://patchwork.freedesktop.org/series/1
Merge drm/drm-next into drm-intel-gt-next
Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as a dependency for https://patchwork.freedesktop.org/series/121735/
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
Revision tags: v6.1.43 |
|
#
41c18552 |
| 30-Jul-2023 |
Marijn Suijten <marijn.suijten@somainline.org> |
arm64: dts: qcom: Use labels with generic node names for ADC channels
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board
arm64: dts: qcom: Use labels with generic node names for ADC channels
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board-specific instead of PMIC-specific - name in the label, if/when desired to overwrite the channel description already contained (but previously unused) in the driver [2]. Follow up on the dt-bindings' `channel` node name requirement, and instead provide this (sometimes per-board) channel description through a label property.
Also remove all the unused label references (not to be confused with label properties) from pm660, pmp8074 and pms405.
[1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230730-generic-adc-channels-v5-2-e6c69bda8034@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
Revision tags: v6.1.42, v6.1.41 |
|
#
61b73694 |
| 24-Jul-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Backmerging to get v6.5-rc2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v6.1.40, v6.1.39 |
|
#
0791faeb |
| 17-Jul-2023 |
Mark Brown <broonie@kernel.org> |
ASoC: Merge v6.5-rc2
Get a similar baseline to my other branches, and fixes for people using the branch.
|
#
2f98e686 |
| 11-Jul-2023 |
Maxime Ripard <mripard@kernel.org> |
Merge v6.5-rc1 into drm-misc-fixes
Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
Revision tags: v6.1.38, v6.1.37 |
|
#
44f10dbe |
| 30-Jun-2023 |
Andrew Morton <akpm@linux-foundation.org> |
Merge branch 'master' into mm-hotfixes-stable
|
#
6c1561fb |
| 29-Jun-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files,
Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened.
The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements along with
- continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1
As usual, a lot more detail is available in the individual merge commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ...
show more ...
|
Revision tags: v6.1.36, v6.4, v6.1.35 |
|
#
60c2f542 |
| 20-Jun-2023 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.5
This introduces the RDP442 and RDP433 reference d
Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.5
This introduces the RDP442 and RDP433 reference devices on IPQ5332 and IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574 are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is added. Support for Acer Apire 1, built on the Snapdragon 7c platform is introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating support for SC8180X and the Lenovo Flex 5G, and the Primus reference device, has been added.
On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described above the RDP442 board on the prior. Download mode support and various reserved-memory regions are also introduced on IPQ6018. IPQ8074 gains another SPI controller.
On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog, qfprom, SMEM and RPM are introduced. As are support for four new board, mentioned above.
MSM8916 gains a range of structural improvements, to better suite the various boards supported. Regulator constraints are corrected and their states are adjusted to match reality (e.g. always-on regulators marked as always-on). BQ Aquaris X5 gains support for front flash LED.
As mentioned above, MSM8939 support is introduced with support for boards from Sony and Square.
MSM8953 gains DMA support in I2C masters.
MSM8996-based Sony Xperia boards gains description of their RGB notification LED.
On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU, AOSS, watchdog and missing low-speed controllers are added. On the Ride platform UFS, USB and an i2c bus are enabled.
iommu properties are added to QSPI on both SC7180 and SC7280. LPASS clocks are adjusted and MDP node cleaned up slightly, on SC7180. As mentioned above, support for Acer Aspire 1 is introduced.
Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the Primus reference device has been merged.
On SC8280XP ethernet is added and enabled on the automotive ride platform. An SDC controller is introduced and enabled on the SC8280XP CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB SuperSpeed phy is added to the Type-C graph, to enable support for orientation switching.
Fairphone 3 gains support for its notification LED.
On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains support for flash LED and the RB3 (DB845c) board gains support for bonded/dual DSI-mode, to allow 4k output.
On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY are introduced. As mentioned above Fxtec Pro1X is introduced. On the QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display, CAN-bus and GPIO LEDs are introduced, fixed regulators are described and the SD-card description is corrected.
Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5 gains SD-card support, camera regulators and GPIO line names sorted out.
SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5 II gains support for hardware video accelerator.
Crypto engine is introduced for SM8350 as well. The HDK gets the USB Type-C graph described for Superspeed orientation switching and DisplayPort output.
On SM8450 video clock controller and crypto engine are added, missing opp levels are introduced and the USB Type-C graph is defined for orientation switching and altmode.
SM8550 gains GPU and video clock controllers and missing opp levels are added. The WCD9385 audio codec is added for the SM8550 MTP and on the QRD PCIe, USB, audio display and flash LED are added.
* tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits) arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G arm64: dts: qcom: sc8180x: Introduce Primus arm64: dts: qcom: sc8180x: Add pmics arm64: dts: qcom: sc8180x: Add display and gpu nodes arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes arm64: dts: qcom: sc8180x: Add PCIe instances arm64: dts: qcom: sc8180x: Add QUPs arm64: dts: qcom: sc8180x: Add thermal zones arm64: dts: qcom: sc8180x: Add interconnects and lmh arm64: dts: qcom: Introduce the SC8180x platform arm64: dts: qcom: msm8916: Move aliases to boards arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec arm64: dts: qcom: msm8916/39: Clean up MDSS labels arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm arm64: dts: qcom: qrb4210-rb2: Enable USB node arm64: dts: qcom: sm6115: Add USB SS qmp phy node arm64: dts: qcom: ipq5332: add support for the RDP442 variant dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family ...
Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
Revision tags: v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24 |
|
#
83022f64 |
| 07-Apr-2023 |
Luca Weiss <luca.weiss@fairphone.com> |
arm64: dts: qcom: pm7250b: add missing spmi-vadc include
This file is using definitions from the spmi-vadc header, so we need to include it.
Fixes: 11975b9b8135 ("arm64: dts: qcom: Add pm7250b PMIC
arm64: dts: qcom: pm7250b: add missing spmi-vadc include
This file is using definitions from the spmi-vadc header, so we need to include it.
Fixes: 11975b9b8135 ("arm64: dts: qcom: Add pm7250b PMIC") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407-pm7250b-sid-v1-1-fc648478cc25@fairphone.com
show more ...
|
#
9a87ffc9 |
| 01-May-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.4 merge window.
|
#
ea68a3e9 |
| 11-Apr-2023 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Need to pull in commit from drm-next (earlier in drm-intel-next):
1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")
In order to
Merge drm/drm-next into drm-intel-gt-next
Need to pull in commit from drm-next (earlier in drm-intel-next):
1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")
In order to merge following patch to drm-intel-gt-next:
https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
Revision tags: v6.1.23, v6.1.22 |
|
#
cecdd52a |
| 28-Mar-2023 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catch up with 6.3-rc cycle...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
Revision tags: v6.1.21 |
|
#
e752ab11 |
| 20-Mar-2023 |
Rob Clark <robdclark@chromium.org> |
Merge remote-tracking branch 'drm/drm-next' into msm-next
Merge drm-next into msm-next to pick up external clk and PM dependencies for improved a6xx GPU reset sequence.
Signed-off-by: Rob Clark <ro
Merge remote-tracking branch 'drm/drm-next' into msm-next
Merge drm-next into msm-next to pick up external clk and PM dependencies for improved a6xx GPU reset sequence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
show more ...
|
#
d26a3a6c |
| 17-Mar-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.3-rc2' into next
Merge with mainline to get of_property_present() and other newer APIs.
|
Revision tags: v6.1.20, v6.1.19 |
|
#
b3c9a041 |
| 13-Mar-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-fixes into drm-misc-fixes
Backmerging to get latest upstream.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
#
a1eccc57 |
| 13-Mar-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Backmerging to get v6.3-rc1 and sync with the other DRM trees.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v6.1.18, v6.1.17 |
|
#
b8fa3e38 |
| 10-Mar-2023 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next
To pick up perf-tools fixes just merged upstream.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Revision tags: v6.1.16, v6.1.15, v6.1.14 |
|
#
585a78c1 |
| 23-Feb-2023 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'linus' into objtool/core, to pick up Xen dependencies
Pick up dependencies - freshly merged upstream via xen-next - before applying dependent objtool changes.
Signed-off-by: Ingo Moln
Merge branch 'linus' into objtool/core, to pick up Xen dependencies
Pick up dependencies - freshly merged upstream via xen-next - before applying dependent objtool changes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
Revision tags: v6.1.13 |
|
#
950b6662 |
| 20-Feb-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC DT updates from Arnd Bergmann: "About a quarter of the changes are for 32-bit arm, mostly filling in devic
Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC DT updates from Arnd Bergmann: "About a quarter of the changes are for 32-bit arm, mostly filling in device support for existing machines and adding minor cleanups, mostly for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from Rockchips that have been around for a while but were lacking kernel support so far: RV1126 is a Vision SoC with an NPU and is used in the Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for TV boxes and so far only comes with a dts for its refernece design.
The other 32-bit boards that were added are two ASpeed AST2600 based BMC boards, the Microchip sam9x60_curiosity development board (Armv5 based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new single-board computers based on variations of the Allwinner D1/T113 chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700 non-merge changesets, among them over 400 alone for Qualcomm. The newly added SoCs this time are all recent high-end embedded SoCs for various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones - Qualcomm QDU1000/QRU1000 5G RAN platform - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs - TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines: - Reference platforms for each of the five new SoCs - Three Amlogic based development boards - Six embedded machines based on NXP i.MX8MM and i.MX8MP - The Mediatek mt7986a based Banana Pi R3 router - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865) - Two LTE dongles, also based on MSM8916 - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610), SDM450 and SDM632 - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c) - Nine development boards based on Rockchips RK3588, RK3568, RK3566 and RK3328. - Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits) dt-bindings: riscv: correct starfive visionfive 2 compatibles ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings arm64: dts: qcom: qcs404: align RPM G-Link node with bindings arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam arm64: dts: qcom: sc7280: Adjust zombie PWM frequency arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses arm64: dts: qcom: sm7225-fairphone-fp4: move status property down arm64: dts: qcom: pmk8350: Use the correct PON compatible arm64: dts: qcom: sc8280xp-x13s: Enable external display arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks arm64: dts: qcom: sm8350-hdk: enable GPU arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes arm64: dts: qcom: sm8350: finish reordering nodes arm64: dts: qcom: sm8350: move more nodes to correct place arm64: dts: qcom: sm8350: reorder device nodes ...
show more ...
|
Revision tags: v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9 |
|
#
2e0f3acb |
| 30-Jan-2023 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 Devicetree updates for v6.3
This introduces support for the new Snapdragon 8
Merge tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 Devicetree updates for v6.3
This introduces support for the new Snapdragon 8 Gen 2 (SM8550) platform. In addition to the adding support for the MTP on this platform, support the following devices is introduced: - GPLUS FL8005A - Google Zombie with LTE and NVMe - Google Zombie with NVMe - Lenovo Tab P11 - Motorola G5 Plus - Motorola G7 Power - Motorola Moto G6 - Samsung Galaxy J5 (2016) - Samsung Galaxy Tab A 8.0 - Samsung Galaxy Tab A 9.7 - Xiaomi Mi A1 - Xiaomi Mi A2 Lite - Xiaomi Redmi 5 Plus - Xiaomi Redmi Note 4X
On IPQ8074 the PCIe PHY register regions and PHY clock names are corrected.
On MSM8916 DMA for the I2C controllers are introduced and blsp_dma is unconditionally enabled. Per-sensor calibration data is provided for the thermal sensor (tsens) block. The GPLUS FL8005A device is introduced and gains support for touchscreen and flash LED. An additional Samsung Galaxy J5 variant is added, and support is added for hall sensor and MUIC.
Per-sensor calibration information is introduced for the thermal sensor on MSM8956 as well.
On MSM8996, GPLL0 is added as a possible Kryo clock controller input, a carveout is added to get modem metadata out of System RAM. Missing bus clocks are added for agnoc2. SDHCI1 is enabled on the Sony Xperia Tone platform and USB is limited to high-speed, to make USB work.
MSM8998 gains the same modem carveout as other platforms, and the description of the clock hierarchy is improved.
On QCS404 the clock hierarchy description is improved, the CDSP PAS node is adjusted to match the binding and the thermal sensor (tsens) gains per-sensor calibration information.
On SC7180 the Data Capture and Compare block is intorduced, and a carveout for the modem metadata is introduced, to get this out of System RAM. Pazquel360 gains touchscreen support, the regulator off-on-time is adjusted for the Trogdor eDP and touchscreen. Data lane and frequency properties are introduced for the DisplayPort links.
SC7280 also gets Data Capture and Compare support, as well as the dedicated modem metadata region. Herobrine gains DP audio support. IPA description is updated so that it's only active on boards with a modem.
On SC8280XP the display subsystem is introduced, currently with support for most of the DisplayPort controllers. GPR, SoundWire and LPASS is introduced, for audio support. Missing I2C and SPI controllers are introduced. Support for EDP is introduced for the CRD, the Lenovo ThinkPad X13s and the SA8295P ADP automotive board. The SA8540P Ride platform enables one i2c and pcie controllers. A CMA region is defined for the CRD and X13s, to avoid allocation issues from the NVMe support.
Fairphone FP3 gains NFC support and the Sony Xperia Nile platform gains a description of simplefb. SDM670 gains QFPROM definition.
SDM845 gains a carveout for the modem metadata and support for the Data Capture and Compare block is introduced. Lenovo Yoga C630 firmware paths are aligned with all other Qualcomm platforms.
On SM6125 apss SMMU is introduced and streams are defined for USB and SDHCI controllers. GPI DMA description is introduced, as well as missing SPI and I2C serial engines. On Sony Xperia 10 IIa regulator definitions are improved, SDHCI2 is introduced, and I2C and related GPI DMA blocks are enabled.
On SM6350 IPA is introduced. DDR and L3 scaling is introduced based on CPUfreq.
Fairphone FP4, on SM7225 also has IPA enabled, and the Flash LED is enabled as well.
On SM8150 the display subsystem is introduced, with clock controller, DPU and two DSI controllers. The Data Capture and Compare block is introduced. For the Sony Xperia Kumano platform, GPIO keys and NFC support is introduced.
For SM8350 PCIe is introduced, as is the display subsystem with display clock controller, DPU and two DSI controllers. #interconnect-cells is changed to 2, to align with other platforms and allow for active-only votes. The display is enabled and the LT9611uxc found on the SM8350 Hardware Development Kit board is described, to provide HDMI output.
On SM8450 the display subsystem is introduced, with DPU and two DSI controllers. GIC-ITS support is introduced for both PCIe0 and PCIe1. SPMI bus support is introduced and pmics are wired up across the various devices. The display subsystem is enabled and the LT9611uxc is described to provide HDMI output on the SM8450 Hardware Development Kit. On Sony Xperia Nagara platform, GPIO keys and GPIO line names are introduced. As is the SLG51000 PMIC and camera regulators are defined.
Support for SM8550 is introduced, with support for storage, USB, remoteprocs, PCIe, low-speed buses, crypto and display subsystem. These blocks are enabled on the MTP.
Lastly, the work continue to align Devicetree source with bindings across all platforms.
* tag 'qcom-arm64-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (320 commits) arm64: dts: qcom: sc7280: Add a carveout for modem metadata arm64: dts: qcom: sc7180: Add a carveout for modem metadata arm64: dts: qcom: sdm845: Add a carveout for modem metadata arm64: dts: qcom: msm8998: Add a carveout for modem metadata arm64: dts: qcom: msm8996: Add a carveout for modem metadata arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names arm64: dts: qcom: ipq8074: fix Gen3 PCIe node arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY arm64: dts: qcom: sdm845-db845c: drop label from I2C controllers arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input arm64: dts: qcom: sm8450: Allow both GIC-ITS and internal MSI controller arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes arm64: dts: qcom: sm8250: drop unused properties from tx-macro arm64: dts: qcom: sm8250: drop unused clock-frequency from wsa-macro arm64: dts: qcom: align OPP table node name with DT schema arm64: dts: qcom: rename mdp nodes to display-controller ...
Link: https://lore.kernel.org/r/20230126202528.3691539-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|