Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

arm64: tegra: Set the correct PHY mode for MGBE

[ Upstream commit 4c892121d43bc2b45896ca207b54f39a8fa6b852 ]

The PHY is configured in 10GBASE-R, so make sure to reflect that in DT.

Reviewed-by: Jo

arm64: tegra: Set the correct PHY mode for MGBE

[ Upstream commit 4c892121d43bc2b45896ca207b54f39a8fa6b852 ]

The PHY is configured in 10GBASE-R, so make sure to reflect that in DT.

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, main

Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.

Only a few new SoC got added:

- TI AM62P5, a variant of the existing Sitara AM62x family

- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.

- Qualcomm ipq5018 is used in wireless access points

- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.

In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.

Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"

* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'tegra-for-6.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

arm64: tegra: Device tree changes for v6.6-rc1

The majority of this is fixes all over the

Merge tag 'tegra-for-6.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

arm64: tegra: Device tree changes for v6.6-rc1

The majority of this is fixes all over the place for DT schema
validation warnings. However, there are also cleanups for some things in
DT and audio support is added on IGX Orin. Jetson Orin NX and Nano also
gain a new thermal trip point to help keep the device cool at moderate
loads.

* tag 'tegra-for-6.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (22 commits)
arm64: tegra: Add blank lines for better readability
arm64: tegra: Remove {clock,reset}-names from VIC powergate
arm64: tegra: Drop incorrect maxim,disable-etr on Smaug
arm64: tegra: Add SPI device tree nodes for Tegra234
arm64: tegra: Enable UARTA and UARTE for Orin Nano
arm64: tegra: Add UARTE device tree node on Tegra234
arm64: tegra: Adapt to LP855X bindings changes
arm64: tegra: Add PCIe and DP 3.3V supplies
arm64: tegra: Add missing reset-names for Tegra HS UART
arm64: tegra: Remove current-speed for SBSA UART
arm64: tegra: smaug: Remove reg-shift for high-speed UART
arm64: tegra: Remove dmas and dma-names for debug UART
arm64: tegra: Add 35°C trip point for Jetson Orin NX/Nano
arm64: tegra: Remove duplicate PCI nodes
arm64: tegra: Sort PCI nodes correctly on Orin
arm64: tegra: Add audio support for IGX Orin
arm64: tegra: Update CPU OPP tables
arm64: tegra: Fix HSUART for Smaug
arm64: tegra: Fix HSUART for Jetson AGX Orin
arm64: tegra: Add missing alias for NVIDIA IGX Orin
...

Link: https://lore.kernel.org/r/20230728094129.3587109-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

arm64: tegra: Add blank lines for better readability

Add a few blank lines to visually separate blocks in the Jetson AGX Orin
device tree.

Signed-off-by: Thierry Reding <treding@nvidia.com>

arm64: tegra: Remove current-speed for SBSA UART

The SBSA UART device tree bindings don't define a current-speed
property, so remove it.

Signed-off-by: Thierry Reding <treding@nvidia.com>

arm64: tegra: Sort PCI nodes correctly on Orin

Recent changes to several Orin boards didn't order some device tree
nodes correctly. Resort them.

Signed-off-by: Thierry Reding <treding@nvidia.com>

arm64: tegra: Add audio support for IGX Orin

Add audio support for the NVIDIA IGX Orin development kit having P3701
module with P3740 carrier board.

Move the common device-tree nodes to a new file

arm64: tegra: Add audio support for IGX Orin

Add audio support for the NVIDIA IGX Orin development kit having P3701
module with P3740 carrier board.

Move the common device-tree nodes to a new file tegra234-p3701.dtsi and
use this for Jetson AGX Orin and NVIDIA IGX Orin platforms

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
[treding@nvidia.com: properly sort nodes]
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

arm64: tegra: Fix HSUART for Jetson AGX Orin

After commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and
reset-names") was applied, the HSUART failed to probe and the following
error is se

arm64: tegra: Fix HSUART for Jetson AGX Orin

After commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and
reset-names") was applied, the HSUART failed to probe and the following
error is seen:

serial-tegra 3100000.serial: Couldn't get the reset
serial-tegra: probe of 3100000.serial failed with error -2

Commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and
reset-names") is correct because the "reset-names" property is not
needed for 8250 UARTs. However, the "reset-names" is required for the
HSUART and should have been populated as part of commit ff578db7b693
("arm64: tegra: Enable UART instance on 40-pin header") that
enabled the HSUART for Jetson AGX Orin. Fix this by populating the
"reset-names" property for the HSUART on Jetson AGX Orin.

Fixes: ff578db7b693 ("arm64: tegra: Enable UART instance on 40-pin header")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files,

Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.

The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.

There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.

- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.

- Amlogic C3 is a Cortex-A35 based smart IP camera chip

- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.

- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.

- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.

All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:

- Marantec Maveo board based on dhcor imx6ull module

- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

- Epson Moverio BT-200 AR glasses based on TI OMAP4

- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

- ICnova ADB4006 board based on Allwinner A20

On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:

- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.

- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)

- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards

Other changes to existing boards contain the usual minor improvements
along with

- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names

- support for devicetree overlays on at91, bcm283x

- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1

As usual, a lot more detail is available in the individual merge
commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...

show more ...

Merge tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

arm64: tegra: Device tree changes for v6.5-rc1

This introduces support for the IGX Orin a

Merge tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

arm64: tegra: Device tree changes for v6.5-rc1

This introduces support for the IGX Orin and Jetson Orin Nano devices
and enables various additional features on the Jetson AGX Orin and
Jetson Orin NX. This also enables some basic thermal support to prevent
the devices from overheating.

Support for the GPU on the Google Pixel C is enabled and various minor
issues are fixed and cleaned up.

* tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable thermal support on Jetson Orin Nano
arm64: tegra: Enable thermal support on Jetson Orin NX
arm64: tegra: Enable thermal support on Jetson AGX Orin
arm64: tegra: Add Tegra234 thermal support
arm64: tegra: Add a few blank lines for better readability
arm64: tegra: Sort properties more logically
arm64: tegra: Enable GPU on Smaug
arm64: tegra: Add GPU power rail regulator on Smaug
arm64: tegra: Update USB phy-name for Jetson Orin NX
arm64: tegra: Enable USB device for Jetson AGX Orin
arm64: tegra: Add Tegra234 pin controllers
arm64: tegra: Support Jetson Orin Nano Developer Kit
arm64: tegra: Add missing cache properties on Tegra210
arm64: tegra: Fix PCIe regulator for Orin Jetson AGX
arm64: tegra: Add CPU OPP tables and interconnects property
arm64: tegra: Add support for IGX Orin

Link: https://lore.kernel.org/r/20230609193620.2275240-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

arm64: tegra: Enable thermal support on Jetson AGX Orin

Add thermal zone details and enable the PWM fan as cooling device.

Note that this also changes the cooling levels for the PWM fan, which
shou

arm64: tegra: Enable thermal support on Jetson AGX Orin

Add thermal zone details and enable the PWM fan as cooling device.

Note that this also changes the cooling levels for the PWM fan, which
should have no effect, though, because the fan wasn't previously
connected to anything and by default would be turned off at probe time.

Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Add a few blank lines for better readability

Surround device tree nodes with blank lines for increased readability.

Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry

arm64: tegra: Add a few blank lines for better readability

Surround device tree nodes with blank lines for increased readability.

Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

arm64: tegra: Sort properties more logically

We typically sort the "compatible" property first because it defines
what the remainder of the properties can be. For the sound node on the
Jetson AGX Or

arm64: tegra: Sort properties more logically

We typically sort the "compatible" property first because it defines
what the remainder of the properties can be. For the sound node on the
Jetson AGX Orin this wasn't done, so fix that up.

Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...