Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files,

Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.

The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.

There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.

- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.

- Amlogic C3 is a Cortex-A35 based smart IP camera chip

- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.

- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.

- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.

All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:

- Marantec Maveo board based on dhcor imx6ull module

- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

- Epson Moverio BT-200 AR glasses based on TI OMAP4

- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

- ICnova ADB4006 board based on Allwinner A20

On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:

- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.

- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)

- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards

Other changes to existing boards contain the usual minor improvements
along with

- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names

- support for devicetree overlays on at91, bcm283x

- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1

As usual, a lot more detail is available in the individual merge
commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...

show more ...

Merge branches 'clk-qcom' and 'clk-microchip' into clk-next

* clk-qcom: (63 commits)
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974:

Merge branches 'clk-qcom' and 'clk-microchip' into clk-next

* clk-qcom: (63 commits)
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
clk: qcom: gcc-ipq6018: remove duplicate initializers
clk: qcom: gcc-ipq9574: Enable crypto clocks
dt-bindings: clock: Add crypto clock and reset definitions
clk: qcom: Add lpass audio clock controller driver for SC8280XP
clk: qcom: Add lpass clock controller driver for SC8280XP
dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP
dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP
dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226
clk: qcom: gpucc-sm8550: Add support for graphics clock controller
clk: qcom: Add support for SM8450 GPUCC
clk: qcom: gcc-sm8450: Enable hw_clk_ctrl
clk: qcom: rcg2: Make hw_clk_ctrl toggleable
dt-bindings: clock: qcom: Add SM8550 graphics clock controller
...

* clk-microchip:
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw

show more ...

Merge tag 'qcom-clk-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

This introduces Global Clock Contro

Merge tag 'qcom-clk-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

This introduces Global Clock Controller for SDX75, LPASS clock
controllers for SC8280XP, video clock controller for SM8350, SM8450 and
SM8550, GPU clock controller for SM8450 and SM8550, RPMH clock support
for SDX75 and IPQ9574 support in APSS IPQ PLL driver.

Support for branch2 clocks with inverted off-bit is introduced and a
couple of fixes to Alpha PLLs handling of TEST_CTL updates.

The handling of active-only clocks in SMD RPM is improved, to ensure
votes are appropriately placed.

SC7180 camera GDSCs are made children of the titan_top GDSC.

A couple of fixes to the display clocks on QCM2290 and shared RCGs in
GCC are marked as such.

SDCC clocks for IPQ6018 and IPQ5332 are corrected to use floor ops, and
network-related resets on IPQ6018 are updated to cover all bits of each
reset.

Crypto clocks are added to IPQ9574 global clock controller, together
with a few cleanups.

Runtime PM is enabeld for SC8280XP GCC and GPUCC, and SM6375 GPUCC.

A few fixes for MSM8974 multi-media clock controller.

Support for some RCG clocks to be automatically controlled by downstream
branches, and added to SM8450 GCC clocks.

Further Kconfig depdenencies are introduce to avoid building Qualcomm
clock drivers on unrelated architectures.

Lastly, related DeviceTree binding updates are made.

The tail of this is not bisectable, due to the missing DeviceTree
binding include files. Rebase at this point in time is not desirable.

* tag 'qcom-clk-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (63 commits)
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
clk: qcom: gcc-ipq6018: remove duplicate initializers
clk: qcom: gcc-ipq9574: Enable crypto clocks
dt-bindings: clock: Add crypto clock and reset definitions
clk: qcom: Add lpass audio clock controller driver for SC8280XP
clk: qcom: Add lpass clock controller driver for SC8280XP
dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP
dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP
dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226
clk: qcom: gpucc-sm8550: Add support for graphics clock controller
clk: qcom: Add support for SM8450 GPUCC
clk: qcom: gcc-sm8450: Enable hw_clk_ctrl
clk: qcom: rcg2: Make hw_clk_ctrl toggleable
dt-bindings: clock: qcom: Add SM8550 graphics clock controller
...

show more ...

Merge tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

More Qualcomm ARM64 DTS changes for v6.5

This introduces support for the Qualcomm SDX75 pl

Merge tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

More Qualcomm ARM64 DTS changes for v6.5

This introduces support for the Qualcomm SDX75 platform, with the IDP
reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the
RDP454 is introduced.
On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added.

For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added
to the CPU cluster power-domain to flush sleep & wake votes as the
cluster goes down.

On IPQ5332 additional reserved-memory regions to improve post mortem
debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the
RDP474 is added.

On IPQ8074 critical thermal trip points are defined.

As with IPQ5332 additional reserved-memory regions are used to improve
post mortem debugging. Thermal sensors (tsens) are added and zones
defined. The crypto engine is added, and support for the RDP454 board is
added.

Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and
the purpose of msm8939-pm8916 is documented. MSM8939 has regulator
definitions cleaned up, following to the previous effort on MSM8916.

CPU Bus Fabric scaling support is added to MSM8996 Pro.

On QCM2290 CPU idle states are added.

For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC
support. IMEM and PIL information regions are defined for improved post
mortem debugging.

The Qualcomm Robotics RB2 kit gets its on-board buttons described.

A few fixes are introduced for the newly merged SC8180X, in particluar
the DisplayPort blocks are moved to the MMCX power domain to avoid power
being reduced prematurely during boot.

The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s,
and resets for the soundwire controllers are added. The OUI is
specified for ethernet phys on SA8540P Ride platform, to avoid reset
issues.

Charger description is added to the PMI8998 PMIC and enabled across
OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1.

On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU
clock controller and IOMMU definitions.

The Fairphone FP4 gains Bluetooth support.

SM8150 is transitioned to use 2 interconnect-cells, and the USB
interconnect path is described to ensure buses are adequately voted for.

The same changes are done for SM8250, and the resolution of the
static framebuffer on Sony Xperia 1 II and 5 II are corrected.

The USB bus paths are also added to SM8350, SM8450 and SM8550.

On SM8550 DisplayPort nodes are added, as is the PWM controller for
driving the notification LED and the RTC is enabled. For the MTP and QRD
boards, the soundcard and audio codecs are defined.

A Tegra change, related to LP855X binding changes, was accidentally
picked up and dropped again later.

A number of DeviceTree fixes identified through validation was
introduced as well. Additionally a few nodes got their default status
changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu
node).

* tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits)
Revert "arm64: dts: adapt to LP855X bindings changes"
arm64: dts: qcom: sc8280xp: Enable GPU related nodes
arm64: dts: qcom: sc8280xp: Add GPU related nodes
arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators
arm64: dts: qcom: msm8939: Define regulator constraints next to usage
arm64: dts: qcom: msm8939-pm8916: Clarify purpose
arm64: dts: qcom: msm8939: Fix regulator constraints
arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6
arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages
arm64: dts: qcom: msm8939: Disable lpass_codec by default
arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies
arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons
arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi
arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl
arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl
arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl
arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl
arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl
arm64: dts: qcom: msm8996: rename labels for HDMI nodes
arm64: dts: qcom: sm8250: rename labels for DSI nodes
...

Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge branch '20230512122347.1219-3-quic_tdas@quicinc.com' into arm64-for-6.5

Merge the SDX75 GCC DeviceTree binding, in order to get access to the
clock defines in the DeviceTree source.

Merge branch '20230512122347.1219-3-quic_tdas@quicinc.com' into clk-for-6.5

Merge SDX75 Global Clock Controller DeviceTree binding through a topic
branch, to allow inclusion in DeviceTree source as

Merge branch '20230512122347.1219-3-quic_tdas@quicinc.com' into clk-for-6.5

Merge SDX75 Global Clock Controller DeviceTree binding through a topic
branch, to allow inclusion in DeviceTree source as well.

show more ...

dt-bindings: clock: qcom: Add GCC clocks for SDX75

Add support for qcom global clock controller bindings for SDX75 platform.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Signed-off-by: Ta

dt-bindings: clock: qcom: Add GCC clocks for SDX75

Add support for qcom global clock controller bindings for SDX75 platform.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512122347.1219-3-quic_tdas@quicinc.com

show more ...