Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there a

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.

If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.

New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK

Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver

Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...

show more ...

Merge branch 'clk-qcom' into clk-next

* clk-qcom: (87 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
clk: qcom: smd-rpm: Add a

Merge branch 'clk-qcom' into clk-next

* clk-qcom: (87 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
clk: qcom: gcc-ipq5018: change some variable static
clk: qcom: gcc-ipq4019: add missing networking resets
dt-bindings: clock: qcom: ipq4019: add missing networking resets
clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
clk: qcom: gcc-qdu1000: Update the RCGs ops
clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
clk: qcom: gcc-qdu1000: Add support for GDSCs
clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
clk: qcom: gcc-qdu1000: Fix clkref clocks handling
clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
clk: qcom: ipq5332: drop the mem noc clocks
clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
...

show more ...

Merge tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

- Support for the Global Clock Contr

Merge tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

- Support for the Global Clock Controller in IPQ5018 is added.
- The SMD RPM driver is cleaned up, with interconnect bus clocks moved
out to the interconnect drivers. Due to being tangled with the
related interconnect updates, the topic branch with interconnect
patches was merged in as well.
- Various bugs in PM runtime integration is fixes across many platforms.
- The MSM8996 core bus framework gains support for MSM8996 Pro.
- MDM9615 is transitioned to parent_hw and parent_data, with related
cleanups. With this the cxo proxy clock is dropped from the driver.
And LCC support for MDM9615 is merged into the MSM8960 driver, to
avoid duplication.
- Network-related resets are added on IPQ4019
- A couple of missing USB-related clocks are added for IPQ9574
- The missing gpll0_sleep_clk_src is added to MSM8917 global clock
controller
- A few minor fixes for MSM8998 global clock controller.
- In the QDU1000 global clock controller GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected.
- Missing GDSCs are added to SC8280XP global clock controller driver,
flags for existing GDSCs are corrected, by enabling retention and
dropping the always-on flags. Retention is also enabled for the
display clock controller GDSCs.
- SDCC apps_clk_src is marked CLK_OPS_PARENT_ENABLE to fix issues with
missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while
sm8450 is corrected to use floor ops.
- SM6350 GPU clock controller clock supplies are corrected.
- Unwanted clocks from the IPQ5332 GCC are dropped.
- The missing OXILICX GDSC is added to MSM8226 GCC.
- The delay in the reset controller is transitioned to fsleep() to
invoke the appropriate sleep method depending on duration.
- The SM83550 Video clock controller is extended to support SC8280XP.

* tag 'qcom-clk-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (86 commits)
clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC
clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags
clk: qcom: gcc-ipq5018: change some variable static
clk: qcom: gcc-ipq4019: add missing networking resets
dt-bindings: clock: qcom: ipq4019: add missing networking resets
clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC
dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC
clk: qcom: gcc-qdu1000: Update the RCGs ops
clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops
clk: qcom: gcc-qdu1000: Add support for GDSCs
clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support
clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
clk: qcom: gcc-qdu1000: Fix clkref clocks handling
clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock
clk: qcom: ipq5332: drop the mem noc clocks
clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks
clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs
...

show more ...

dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs

Add support for GCC_GPLL1_OUT_EVEN and GCC_DDRSS_ECPRI_GSI_CLK clock
bindings for QDU1000 and QRU1000 SoCs. While at it, update the

dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs

Add support for GCC_GPLL1_OUT_EVEN and GCC_DDRSS_ECPRI_GSI_CLK clock
bindings for QDU1000 and QRU1000 SoCs. While at it, update the
maintainers list.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-2-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get latest upstream.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.3-rc1 and sync with the other DRM trees.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next

To pick up perf-tools fixes just merged upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branches 'clk-loongson' and 'clk-qcom' into clk-next

* clk-loongson:
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file

* clk-qcom: (143 commit

Merge branches 'clk-loongson' and 'clk-qcom' into clk-next

* clk-loongson:
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file

* clk-qcom: (143 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
clk: qcom: gcc-sa8775p: remove unused variables
clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform
clk: qcom: add msm8996 Core Bus Framework (CBF) support
dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller
clk: qcom: add the driver for the MSM8996 APCS clocks
clk: qcom: gcc-qcs404: fix duplicate initializer warning
clk: qcom: cpu-8996: change setup sequence to follow vendor kernel
clk: qcom: cpu-8996: fix PLL clock ops
clk: qcom: cpu-8996: fix ACD initialization
clk: qcom: cpu-8996: fix PLL configuration sequence
clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call
clk: qcom: cpu-8996: setup PLLs before registering clocks
clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb
...

show more ...

Merge branch 'linus' into objtool/core, to pick up Xen dependencies

Pick up dependencies - freshly merged upstream via xen-next - before applying
dependent objtool changes.

Signed-off-by: Ingo Moln

Merge branch 'linus' into objtool/core, to pick up Xen dependencies

Pick up dependencies - freshly merged upstream via xen-next - before applying
dependent objtool changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge tag 'qcom-clk-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

Support for requesting the next pow

Merge tag 'qcom-clk-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

Support for requesting the next power_off operation for a genpd to be
synchronous is introduced, and implemented in the GDSC driver. To allow
the GPU driver to request power_off to wait for the GDSC to actually
collapse.

Support for QDU1000/QRU1000 Global clock controller, SA8775P Global
clock controller, SM8550 TCSR and display clock controller, SM6350 clock
controller, nd MSM8996 CBF and APCS clock controllers is introduced.

Parent references are updated across a large number of clock drivers, to
align with the design changes since those drivers where introduced.
Similarly, test clocks has been dropped from a range of drivers.

A range of fixes for the MSM8996 CPU clock controller is introduced.

MSM8974 GCC is transitioned off the externally defined sleep_clk.

GDSC in the global clock controller for QCS404 is added, and various
parent definitions are cleaned up.

The SDCC core clocks on SM6115 are moved for floor_ops.

Programming of clk_dis_wait for GPU CX GDSC on SC7180 and SDM845 are
moved to use the recently introduced properties in the GDSC struct.

The RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock
is added on a variety of platforms.

The SMD RPM driver receives a big cleanup, in particular a move away
from duplicating declaration of identical clocks between multiple
platforms.
A few missing clocks across msm8998, msm8992, msm8916, qcs404 are added
as well.

Using devm_pm_runtime_enable() to clean up some duplication is done
across SM8250 display and video clock controllers, SM8450 display clock
controller and SC7280 LPASS clock controller.

Devicetree binding changes for above mentioned additions and changes are
introduced.

Support for postponing clk_disable_unused() until sync_state was
introduced, but later reverted again, awaiting an agreement on the
solution.

Lastly, a change to pad a few registers in the SM8250 DTS to 8 digits
was picked up in the wrong tree and kept here, to avoid rebasing.

* tag 'qcom-clk-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (142 commits)
clk: qcom: Revert sync_state based clk_disable_unused
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
clk: qcom: gcc-sa8775p: remove unused variables
clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform
clk: qcom: add msm8996 Core Bus Framework (CBF) support
dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller
clk: qcom: add the driver for the MSM8996 APCS clocks
clk: qcom: gcc-qcs404: fix duplicate initializer warning
clk: qcom: cpu-8996: change setup sequence to follow vendor kernel
clk: qcom: cpu-8996: fix PLL clock ops
clk: qcom: cpu-8996: fix ACD initialization
clk: qcom: cpu-8996: fix PLL configuration sequence
clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call
clk: qcom: cpu-8996: setup PLLs before registering clocks
clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb
clk: qcom: cpu-8996: skip ACD init if the setup is valid
...

show more ...

Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
devic

Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.

Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.

The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.

On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.

As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:

- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications

In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)

The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"

* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...

show more ...

Merge tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

More Qualcomm ARM64 DT updates for 6.3

The new Qualcomm QDU1000 and QRU1000 platforms, and

Merge tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

More Qualcomm ARM64 DT updates for 6.3

The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.

The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.

A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.

QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.

On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.

On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.

Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.

On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.

The firmware paths are corrected for the Sony Xperia Nagara platform.

The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.

gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.

* tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (81 commits)
arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly
arm64: dts: qcom: pmk8550: fix PON compatible
arm64: dts: qcom: sm8550: fix DSI controller compatible
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager
arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb
arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V
arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
arm64: dts: qcom: sm6350: Use specific qmpphy compatible
arm64: dts: qcom: sm6115: Add smp2p nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm6350: Add camera clock controller
dt-bindings: clock: add QCOM SM6350 camera clock bindings
...

Link: https://lore.kernel.org/r/20230210192908.2039976-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge branch '20230112204446.30236-2-quic_molvera@quicinc.com' into arm64-for-6.3

Merge DT binding in order to get GCC clock defines.

Merge branch '20230112204446.30236-2-quic_molvera@quicinc.com' into HEAD

dt-bindings: clock: Add QDU1000 and QRU1000 GCC clocks

Add device tree bindings for global clock controller on QDU1000 and
QRU1000 SoCs.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Revi

dt-bindings: clock: Add QDU1000 and QRU1000 GCC clocks

Add device tree bindings for global clock controller on QDU1000 and
QRU1000 SoCs.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112204446.30236-2-quic_molvera@quicinc.com

show more ...