configurations: yosemite4: Remove duplicate Fan Board configs

This commit removes the duplicate fan board configs since it should only
load one config for one FRU instead of loading multiple configs

configurations: yosemite4: Remove duplicate Fan Board configs

This commit removes the duplicate fan board configs since it should only
load one config for one FRU instead of loading multiple configs.
Test Plan: Fan board sensor config can be loaded and fan board sensors
can be read.

Change-Id: I0c06b747671d6b59d0942c327e4782c556390282
Signed-off-by: Ian Chien <ianchien.wiwynn@gmail.com>

show more ...

configurations: yosemite4: Support second sources fan board

Support second sources fan board config.
Test case: Fan board config can be loaded and fan sensors can be read.

Change-Id: I7c67f782f45bd

configurations: yosemite4: Support second sources fan board

Support second sources fan board config.
Test case: Fan board config can be loaded and fan sensors can be read.

Change-Id: I7c67f782f45bddbfa034e35ecd1b01dba259c686
Signed-off-by: Ian Chien <ianchien.wiwynn@gmail.com>

show more ...

configurations: yosemite4: Remove the duplicate code in Fan config

To remove the dulpicate and hard-coding of Bus number and sensor naming
in the fanboard config.
Test Case: Fan config can be loaded

configurations: yosemite4: Remove the duplicate code in Fan config

To remove the dulpicate and hard-coding of Bus number and sensor naming
in the fanboard config.
Test Case: Fan config can be loaded and fan sensors can be read.

Change-Id: I0f307892ce0cfceb78507dd547befe3e323ecaff
Signed-off-by: Ian Chien <ianchien.wiwynn@gmail.com>

show more ...

configurations: yosemite4: Rename Medusa FRU/config by variants

Rename FRU and sensor config by variants for the Medusa Board due to
it's going to supports different sources Medusa Board.
Test case:

configurations: yosemite4: Rename Medusa FRU/config by variants

Rename FRU and sensor config by variants for the Medusa Board due to
it's going to supports different sources Medusa Board.
Test case: Medusa sensor config can be loaded and the sensors can be
read.

Change-Id: I8901f52b4bf477814c8af94e44c82649ee75fd75
Signed-off-by: Ian Chien <ianchien.wiwynn@gmail.com>

show more ...

configurations: yosemite4: Add 12V EFFUSE Power Input for the Medusa

Add 12V EFFUSE Power Input for the Medusa Board.
Test case: 12V EFFUSE Power Input can be read via busctl.

Change-Id: Iea4e6f141

configurations: yosemite4: Add 12V EFFUSE Power Input for the Medusa

Add 12V EFFUSE Power Input for the Medusa Board.
Test case: 12V EFFUSE Power Input can be read via busctl.

Change-Id: Iea4e6f14170bc68f63a9c6d811c2cd9f76485594
Signed-off-by: Ian Chien <ianchien.wiwynn@gmail.com>

show more ...

configurations:system1: add tmp432 sensor

Tested:
- Confirmed temperatures appeared under
xyz.openbmc_project.HwmonTempSensor service and had expected
temperatures.

Change-Id: I22557ac7e4adbb25

configurations:system1: add tmp432 sensor

Tested:
- Confirmed temperatures appeared under
xyz.openbmc_project.HwmonTempSensor service and had expected
temperatures.

Change-Id: I22557ac7e4adbb259329db40f187d4ea8b601a30
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>

show more ...

configurations: sbp1: Update sensor thresholds

Update the ADC thresholds to match the I2C PSU sensor thresholds.

Change-Id: Ica58ae0a6f605f7ef4ad88cd6600be06d0400fb5
Signed-off-by: Patrick Rudolph

configurations: sbp1: Update sensor thresholds

Update the ADC thresholds to match the I2C PSU sensor thresholds.

Change-Id: Ica58ae0a6f605f7ef4ad88cd6600be06d0400fb5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Add labels for shared inputs

Add labels for Iin, Pin and Vin on dual output regulators.

Change-Id: If14db8fe1bd2c9eae68b3fb1c1146744969d87dc
Signed-off-by: Patrick Rudolph <pa

configurations: sbp1: Add labels for shared inputs

Add labels for Iin, Pin and Vin on dual output regulators.

Change-Id: If14db8fe1bd2c9eae68b3fb1c1146744969d87dc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Update PSU thresholds

Update upper and lower warning thresholds by 5V to allow a
greater margin.

Change-Id: I1cfed75e137d6d839763300ed1901b6587194ec8
Signed-off-by: Patrick Ru

configurations: sbp1: Update PSU thresholds

Update upper and lower warning thresholds by 5V to allow a
greater margin.

Change-Id: I1cfed75e137d6d839763300ed1901b6587194ec8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: sbp1: Swap sensor names

The names of the two voltage rails (PVCCINFAON and PVCCFA_EHV) were
swapped on the MP2971s. The thresholds are still correct, it's just
about the user visible

configurations: sbp1: Swap sensor names

The names of the two voltage rails (PVCCINFAON and PVCCFA_EHV) were
swapped on the MP2971s. The thresholds are still correct, it's just
about the user visible names.

TEST: The webui shows the correct sensor names.

Change-Id: I6a13d4e3882d2095c48ea31f593d710e6cc837ef
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>

show more ...

configurations: yosemite4: Add second sources support for Medusa Board

To add second sources Medusa Board config.
Test Plan: Loads the config and sensors can be read.

Change-Id: I01bbbb8b6bd442a6f5

configurations: yosemite4: Add second sources support for Medusa Board

To add second sources Medusa Board config.
Test Plan: Loads the config and sensors can be read.

Change-Id: I01bbbb8b6bd442a6f581bfe99c76f91f45e606b7
Signed-off-by: Ian Chien <ianchien.wiwynn@gmail.com>

show more ...

configurations: yosemite4: Remove the redundant NIC sensors

Remove the redundant NIC sensors in yosemite4 sensor config since these
sensors are already implemented in NIC sensor config.
Test case: N

configurations: yosemite4: Remove the redundant NIC sensors

Remove the redundant NIC sensors in yosemite4 sensor config since these
sensors are already implemented in NIC sensor config.
Test case: NIC sensors can be read on yv4 platform.

Change-Id: Ic033f01d7127abf1d204ff5dcd2b2d91e9ad7223
Signed-off-by: Ian Chien <ianchien.wiwynn@gmail.com>

show more ...

configurations: minerva: add hsc 2nd source

Add new json file to support Infineon HSC (XDP710) for CMM board.

Change-Id: Ib8ebd8fbfe96def1e4cf3c8bac829a87e806c7d9
Signed-off-by: Yang Chen <yang.che

configurations: minerva: add hsc 2nd source

Add new json file to support Infineon HSC (XDP710) for CMM board.

Change-Id: Ib8ebd8fbfe96def1e4cf3c8bac829a87e806c7d9
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configurations: Updates to Mt.Mitchell

This commit modifies configurations of ADCSensors, and adds more
interfaces to the motherboard and BMC board inventory.

Signed-off-by: Chau Ly <chaul@ampereco

configurations: Updates to Mt.Mitchell

This commit modifies configurations of ADCSensors, and adds more
interfaces to the motherboard and BMC board inventory.

Signed-off-by: Chau Ly <chaul@amperecomputing.com>
Change-Id: I974a02bffd253cb33de8c6fb091d0be12cab0e8d

show more ...

configurations: add AssetTag interface

Add AssetTag and SparePartNumber

Change-Id: I0c88412d5bec5a67db30a257194c7188ceae38fb
Signed-off-by: Peter Yin <peter.yin@quantatw.com>

configurations: yosemite4: Revise Decorator.Asset to include board info

- Revise Decorator.Asset to include board info
- Support BuildDate

Change-Id: I2c28fa7407689bf39c382f1e0a7b67ba2654753b
Signe

configurations: yosemite4: Revise Decorator.Asset to include board info

- Revise Decorator.Asset to include board info
- Support BuildDate

Change-Id: I2c28fa7407689bf39c382f1e0a7b67ba2654753b
Signed-off-by: Ingrid Chen <ingrid.chen.wiwynn@gmail.com>

show more ...

fru_reader: add header for off_t

GCC-14 with the latest Yocto refresh give the following compile
failure:

```
| ../git/src/fru_reader.hpp:36:27: error: 'off_t' was not declared in this scope
| 3

fru_reader: add header for off_t

GCC-14 with the latest Yocto refresh give the following compile
failure:

```
| ../git/src/fru_reader.hpp:36:27: error: 'off_t' was not declared in this scope
| 36 | std::function<int64_t(off_t offset, size_t len, uint8_t* outbuf)>;
```

This appears to be defined in `stdio.h`, so include `<cstdio>`.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I4dadec5f0735a902d6fd47de6667ebc5cd670e15

show more ...

configurations: minerva_fanboard: revise sensor's threshold

- Change fan speed RPM lower critical to 1000.
- Change volt of INA238 lower critical to 48.45.
- Change volt of INA238 upper critical to

configurations: minerva_fanboard: revise sensor's threshold

- Change fan speed RPM lower critical to 1000.
- Change volt of INA238 lower critical to 48.45.
- Change volt of INA238 upper critical to 53.35.

Change-Id: I3bace4ed7d0598eac7b500f09bb54765e705b8ee
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configurations: harma: update thresholds

Update thresholds for harma fanboard and minerva pttv.
1. Recalibrate the threshold value of the fanboard rpm
2. Calibrate the threshold value of the PTTV du

configurations: harma: update thresholds

Update thresholds for harma fanboard and minerva pttv.
1. Recalibrate the threshold value of the fanboard rpm
2. Calibrate the threshold value of the PTTV due to the
heater's tolerance and power reduction.

Change-Id: I6b9d79b5ce063f0070a5edba7630ecd002cb97e7
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>

show more ...

yosemite4 fanboard: MAX/TI source: fix board name

The FRU device name of one of the fanboard multi-source variants
had "FAN", as if it were an acronym. Use proper case ("Fan") for
that part of the

yosemite4 fanboard: MAX/TI source: fix board name

The FRU device name of one of the fanboard multi-source variants
had "FAN", as if it were an acronym. Use proper case ("Fan") for
that part of the name.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I8092998145260df5e198cea250ab88c3ed9f6a4c

show more ...

configuration: Add yosemite4 config for Nuvoton BMC

- Add yosemite4n.json in configurations
- Update meson.build

Change-Id: Ia1167d3229e535bd646c0d0bc1ff84121909d5d3
Signed-off-by: RickyWu-wiwynn <

configuration: Add yosemite4 config for Nuvoton BMC

- Add yosemite4n.json in configurations
- Update meson.build

Change-Id: Ia1167d3229e535bd646c0d0bc1ff84121909d5d3
Signed-off-by: RickyWu-wiwynn <ricky_cx_wu@wiwynn.com>
Signed-off-by: Tim Lee <timlee660101@gmail.com>

show more ...

configuration: yosemite4: support different fan table for T1 and T2 SD

There are two different types of Sentinel Dome for Yosemite4.
1. T1: It doesn't has Wailua Falls and data drive and has two few

configuration: yosemite4: support different fan table for T1 and T2 SD

There are two different types of Sentinel Dome for Yosemite4.
1. T1: It doesn't has Wailua Falls and data drive and has two fewer
DIMMs than T2.
2. T2: It has Wailua Falls.

Check the FRU information to add different fan table for T1 and T2
Sentinel Dome.

TODO:
Thermal team will fine tuen the fan table for both T1 and T2 SD.

Change-Id: I7f0fca02d162d43e1343609410738cd2dbb9ad21
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>

show more ...

configurations: add Broadcom NIC temperature lower critical threshold

Add Broadcom NIC temperature lower critical threshold to configurations.

Change-Id: I537bd571700a7fdaa9b63a4951b24c1f1301c47b
S

configurations: add Broadcom NIC temperature lower critical threshold

Add Broadcom NIC temperature lower critical threshold to configurations.

Change-Id: I537bd571700a7fdaa9b63a4951b24c1f1301c47b
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>

show more ...

configurations: harma: add fan board temperature

Add Fan board temperature device.

Change-Id: I15bec1fece1afbf141b81c154d90f27708faef83
Signed-off-by: Peter Yin <peter.yin@quantatw.com>

configurations: harma: minerva: update configurations

Summary:
1. update harma_mb dimm power threshold.
2. remove harma_mb some unused non-critical threshold.
3. add minerva_pttv adc voltage thresho

configurations: harma: minerva: update configurations

Summary:
1. update harma_mb dimm power threshold.
2. remove harma_mb some unused non-critical threshold.
3. add minerva_pttv adc voltage threshold.
4. remove minerva_pttv PTTV_ADC_P5V_AUX_VOLT_V.

Change-Id: Ic05fe4086a1142fb6ca8020e4d6135d97ec2fe56
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>

show more ...