configuration: ventura: add hysteresis

The hysteresis value is set to 2% of the trigger threshold
to ensure more precise triggering of assert and deassert for
sensors like a 12V sensor. For example,

configuration: ventura: add hysteresis

The hysteresis value is set to 2% of the trigger threshold
to ensure more precise triggering of assert and deassert for
sensors like a 12V sensor. For example, with normal readings
and thresholds at ±10% (10.8V to 13.2V), the default value of
2.55 is too large for this range.

Change-Id: I75df51a2a5ae1a36878787226e6ba451c87b02a4
Signed-off-by: Jason Hsu <jason-hsu@quantatw.com>

show more ...

configurations: catalina_hdd: Add support for 2nd source board

This commit introduces configuration support for the Catalina HDD 2nd
source board, which utilizes the ISL28022 ADC sensor for monitori

configurations: catalina_hdd: Add support for 2nd source board

This commit introduces configuration support for the Catalina HDD 2nd
source board, which utilizes the ISL28022 ADC sensor for monitoring.

For newly built boards, use the `BOARD_INFO_AM4` field to determine the
ADC chip type. For older boards that lack `BOARD_INFO_AM4`, use
`BOARD_PART_NUMBER` to determine the chip type.

- Main source board:
- ADC Chip: INA230
- BOARD_PART_NUMBER: 3FF0NHB0010, 3FF0NHB0030
- BOARD_INFO_AM4: adc-ina

- 2nd source board:
- ADC Chip: ISL28022
- BOARD_PART_NUMBER: 3FF0NHB0020
- BOARD_INFO_AM4: adc-isl

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: Icd7094eb11eaee17dc38e5b8b6c3f0032f08846c

show more ...

configurations: minerva: modify calibration and threshold

- Modify scale and offset value for calibration of the infineon hsc.
- Remove the low critical threshold of the hsc power.

Change-Id: I7ca3

configurations: minerva: modify calibration and threshold

- Modify scale and offset value for calibration of the infineon hsc.
- Remove the low critical threshold of the hsc power.

Change-Id: I7ca3dd2ca1543b285bb6b5c095427f145c7833aa
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configurations: ventura: modify fan board probe condition

Change the probe condition from multiple line to one line on the
ventura fan board main/second source to avoid the duplicate probe
problem.

configurations: ventura: modify fan board probe condition

Change the probe condition from multiple line to one line on the
ventura fan board main/second source to avoid the duplicate probe
problem.

Change-Id: Ifeb1adb4efc11712ee3f251d1f981052183c605d
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

Add schema for fw update of Infineon XDPE1X2XX class of devices

Add voltage regulators update schema such as:
- Name - Name of the regulator
- Type - Enum of supported devices or device classes.
- B

Add schema for fw update of Infineon XDPE1X2XX class of devices

Add voltage regulators update schema such as:
- Name - Name of the regulator
- Type - Enum of supported devices or device classes.
- Bus (I2C), which the VR is connected to
- Address(I2C) on the bus.
- FirmwareInfo (VendorIANA, Compatible)

Change-Id: I8a5979afa7cc2558829639fc31a8f6751ea2e161
Signed-off-by: Christopher Meis <christopher.meis@9elements.com>

show more ...

configurations: yosemite4: remove MEDUSA ADC LCR

Remove MEDUSA ADC LCR settings for INA233, INA238, ISL28022, RTQ6056.

Tested:
Check sensor thresholds. They all work fine.

Change-Id: Ibbf9986bda0c

configurations: yosemite4: remove MEDUSA ADC LCR

Remove MEDUSA ADC LCR settings for INA233, INA238, ISL28022, RTQ6056.

Tested:
Check sensor thresholds. They all work fine.

Change-Id: Ibbf9986bda0cea26117fafb9fe3d8f97b19bcd90
Signed-off-by: Yikai Tsai <yikai.tsai.wiwynn@gmail.com>

show more ...

configurations/tyan: Probe for Manufacturer 'TYAN'

Tested: Checked FRU contents of these boards.
Tested that probe succeeds on one of the boards.

Board configs changed:
- Tyan S5549
- Tyan S8030
-

configurations/tyan: Probe for Manufacturer 'TYAN'

Tested: Checked FRU contents of these boards.
Tested that probe succeeds on one of the boards.

Board configs changed:
- Tyan S5549
- Tyan S8030
- Tyan S8040
- Tyan S8047

Change-Id: I8b67d6e6e2d789af2ce0d256982ba3291e925198
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>

show more ...

configuration: minerva: support network blade fru

There are two configurations of network blades in the Minerva platform.

One is Janga; the other is Tahan. They do not have any sensors
but includes

configuration: minerva: support network blade fru

There are two configurations of network blades in the Minerva platform.

One is Janga; the other is Tahan. They do not have any sensors
but includes an EEPROM that should be exported on the D-Bus,
including Redfish.

These two types of network blades can be assembled on any of the
I2C buses: 40, 41, 42, 44, 45, or 46 on the CMM (Chassis
Management Module).

Therefore, we have redefined the numbering scheme for each blade
based on its location in the rack.

Change-Id: I1a536a4252a12863bd38f43ec621e55b05b273ce
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configurations: yosemite4: Adjust inlet and outlet fan speed UNC

Set UNC value based on the fan speed at PWM 90%
1. Adjust UNC of inlet fan speed from 14600 to 15730 rpm.
2. Adjust UNC of outlet fan

configurations: yosemite4: Adjust inlet and outlet fan speed UNC

Set UNC value based on the fan speed at PWM 90%
1. Adjust UNC of inlet fan speed from 14600 to 15730 rpm.
2. Adjust UNC of outlet fan speed from 13300 to 15840 rpm.

Change-Id: Id45ef1bdf0839a050f6de4928ab09171b66256e7
Signed-off-by: Zoey YJ Chung <zoey.yj.chung.wiwynn@gmail.com>

show more ...

configurations: harma: modify the cycle time

Modify the cycle time to 3 seconds to prevent excessive polling.

Test:
00:37:58 swampd: PID name: Stepwise_NIC
00:37:58 swampd: inputs: NIC_Temp_1,
00:3

configurations: harma: modify the cycle time

Modify the cycle time to 3 seconds to prevent excessive polling.

Test:
00:37:58 swampd: PID name: Stepwise_NIC
00:37:58 swampd: inputs: NIC_Temp_1,
00:37:58 swampd: PID name: Stepwise_SCM_INLET
00:37:58 swampd: inputs: SCM_INLET_TEMP_C,
00:37:58 swampd: Build failsafe logger for Zone 0 with initial
failsafe mode: 0
00:37:58 swampd: pushing zone 0
00:37:58 swampd: PID Zone 0 max SetPoint 20 requested by Stepwise_Brick
00:38:01 swampd: Zone 0 fans, entering failsafe mode, output pwm: 85

Change-Id: I0d3f66e801bb24a00c652914d8f07aba542ae3e1
Signed-off-by: Peter Yin <peter.yin@quantatw.com>

show more ...

config/sbp1: Update sensor thresholds for NIC sensors

Update temperature threshold for PHY & NIC sensors.

Change-Id: I788b9af1ee47cc1bec38fe15c51e1c3e7a77e3ff
Signed-off-by: Naresh Solanki <naresh.

config/sbp1: Update sensor thresholds for NIC sensors

Update temperature threshold for PHY & NIC sensors.

Change-Id: I788b9af1ee47cc1bec38fe15c51e1c3e7a77e3ff
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>

show more ...

ventura: Modify entity-manager Fan voltage formula

Change-Id: I18c686b5c2275f426cc022a8bbb093ab3d65130f
Signed-off-by: Jason Hsu <jason-hsu@quantatw.com>

sentinel-dome: remove interface from board configs

The ManagedHost interface used by bmcweb would populate the
ComputerSystem collection with 16 members instead of 8.
Removing the interface from the

sentinel-dome: remove interface from board configs

The ManagedHost interface used by bmcweb would populate the
ComputerSystem collection with 16 members instead of 8.
Removing the interface from the board configs and
only keeping it on the chassis config resolves the issue.

Tested: Build target image and observe result of a getSubTree
call constrained to the interface return 8 objects.

Change-Id: Ib87fa81e436df725b461d2b96907111ad4cf9a4f
Signed-off-by: Oliver Brewka <mox669.dev@gmail.com>

show more ...

ProductId: remove property

At both the top-level and in Item.Board.Motherboard schemas was a
required property: "ProductId". This property has never been documented
in phosphor-dbus-interfaces and

ProductId: remove property

At both the top-level and in Item.Board.Motherboard schemas was a
required property: "ProductId". This property has never been documented
in phosphor-dbus-interfaces and is only used in exactly 1 OEM IPMI
provider (and no where else)[1, 2]. Strip this unused property out.

Test Plan: entity-manager schema validators pass. Search in code base
for usages.

[1]: https://github.com/openbmc/intel-ipmi-oem/blob/0fcc73f1cf8c486bb8079e68813c239c4cc41bbc/src/oemcommands.cpp#L2929
[2]: https://github.com/search?q=org%3Aopenbmc+%2F%28%3F-i%29ProductId%2F+-repo%3Aopenbmc%2Flinux+-repo%3Aopenbmc%2Fqemu&type=code

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I81f02c54aaee78e5d1c3b3e020437ebd3d7b4e3f

show more ...

ventura: Add max setting for sensor trigger

RMC add max setting and threshold value for sensor threshold trigger.

Change-Id: I7d9f60f21af0ce3fea0a10eb07beac25f139aafe
Signed-off-by: Jason Hsu <jaso

ventura: Add max setting for sensor trigger

RMC add max setting and threshold value for sensor threshold trigger.

Change-Id: I7d9f60f21af0ce3fea0a10eb07beac25f139aafe
Signed-off-by: Jason Hsu <jason-hsu@quantatw.com>

show more ...

configurations: ventura: support RMC with motherboard interface

Add a Motherboard interface on the Ventura RMC board.

Change-Id: Id5a7120a5e1c967281696bb2543c2695c4ff1d01
Signed-off-by: PKLee-Quant

configurations: ventura: support RMC with motherboard interface

Add a Motherboard interface on the Ventura RMC board.

Change-Id: Id5a7120a5e1c967281696bb2543c2695c4ff1d01
Signed-off-by: PKLee-Quanta <p.k.lee@quantatw.com>

show more ...

clang-format: update latest spec and reformat

Copy the latest format file from the docs repository and apply.

Change-Id: I71c8504caaa31ac43ae0f20c002ed081078e3f48
Signed-off-by: Patrick Williams <p

clang-format: update latest spec and reformat

Copy the latest format file from the docs repository and apply.

Change-Id: I71c8504caaa31ac43ae0f20c002ed081078e3f48
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>

show more ...

meson: reformat with meson formatter

Apply the `meson format` results.

Change-Id: Iab5fdd6b41eab1cc138df39f1dce5345bf260306
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>

configurations: minerva: modify scale and offset for infineon hsc

Modify scale and offset value for calibration of the infineon hsc.

Change-Id: Ie483a446229d6b9c01ecc741acdc16069a3947fe
Signed-off-

configurations: minerva: modify scale and offset for infineon hsc

Modify scale and offset value for calibration of the infineon hsc.

Change-Id: Ie483a446229d6b9c01ecc741acdc16069a3947fe
Signed-off-by: Yang Chen <yang.chen@quantatw.com>

show more ...

configurations: Add tyan s5549,s8030,s8040,s8047

Also add Marvin and myself as code owners there since we may need to
change some things in those configs later on.
For example, thresholds and such.

configurations: Add tyan s5549,s8030,s8040,s8047

Also add Marvin and myself as code owners there since we may need to
change some things in those configs later on.
For example, thresholds and such.

Tested: These configurations have been tested to work on the hardware.
Specific bus numbers and addresses are of course dependent on your
devicetree but the amount and type of sensors should be similar.

So if you do have one of these boards, the configurations may be of use
to you.

Change-Id: I11f31acda9dbaecef4886911422b63c7a448c347
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>

show more ...

configurations: move tyan configs

Move tyan configs into their own folder.

Change-Id: I2b3115e517c0dbeaa236542abea4b5f9c4282432
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>

configuration: harma: add fan table

1. Add fan table in the config files so that the fan table
could be created dynamically according to the FRU devices.
harma_mb.json, harma_mb_vr_infineon.json

2.

configuration: harma: add fan table

1. Add fan table in the config files so that the fan table
could be created dynamically according to the FRU devices.
harma_mb.json, harma_mb_vr_infineon.json

2. Change fan naming from 0-based to 1-based.
harma_fanboard.json

Change-Id: Id3852b2d546cbf02d6f0515a343aab4f4f228a74
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>

show more ...

configurations: harma_mb: update hysteresis

Since the sensor MB_PVDD18_S5_VOLT_V has VSENSE, its reported values
are very precise, resulting in a narrow UCR and LCR range. Adding a
2% hysteresis in

configurations: harma_mb: update hysteresis

Since the sensor MB_PVDD18_S5_VOLT_V has VSENSE, its reported values
are very precise, resulting in a narrow UCR and LCR range. Adding a
2% hysteresis in this case would make the threshold difficult to
trigger, so the hysteresis is set to 0.

Change-Id: I3521b909405c9de24c5568e56d510b07d5796e1b
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>

show more ...

configurations: yosemite4: Modify fan control configs

Modify fan control configs according to the test result from thermal
team.

Change-Id: I6408dbeb2385972d7ffbc88a3a768b1e44cd8f38
Signed-off-by:

configurations: yosemite4: Modify fan control configs

Modify fan control configs according to the test result from thermal
team.

Change-Id: I6408dbeb2385972d7ffbc88a3a768b1e44cd8f38
Signed-off-by: Zoey YJ Chung <zoey.yj.chung.wiwynn@gmail.com>

show more ...

configurations: update nvidia_gb200_io_board probe rule

We observed that the "Board Produce Name" of a new batch of IO boards
has changed to "2x ConnectX-7 Mezz".
Update the probe rule to support wi

configurations: update nvidia_gb200_io_board probe rule

We observed that the "Board Produce Name" of a new batch of IO boards
has changed to "2x ConnectX-7 Mezz".
Update the probe rule to support with new IO board.

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: Ic02b248200aa7dd04b2e0ea9a1f53c91d27eecce

show more ...