Home
last modified time | relevance | path

Searched refs:DSI (Results 1 – 25 of 85) sorted by relevance

1234

/openbmc/linux/Documentation/devicetree/bindings/display/
H A Dmipi-dsi-bus.txt1 MIPI DSI (Display Serial Interface) busses
6 define the syntax used to represent a DSI bus in a device tree.
8 This document describes DSI bus-specific properties only or defines existing
9 standard properties in the context of the DSI bus.
11 Each DSI host provides a DSI bus. The DSI host controller's node contains a
15 The following assumes that only a single peripheral is connected to a DSI
18 DSI host
22 a DSI host, the following properties apply to a node representing a DSI host.
26 bus. DSI peripherals are addressed using a 2-bit virtual channel number, so
34 conjunction with another DSI host to drive the same peripheral. Hardware
[all …]
H A Dtruly,nt35597.txt1 Truly model NT35597 DSI display driver
18 for single DSI or Dual DSI
19 This should be low for dual DSI and high for single DSI mode
23 - port@0: DSI input port driven by master DSI
24 - port@1: DSI input port driven by secondary DSI
/openbmc/linux/drivers/gpu/drm/bridge/
H A DKconfig19 tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge"
26 ICN6211 is MIPI-DSI/RGB Converter bridge from chipone.
28 It has a flexible configuration of MIPI DSI signal input
92 tristate "Lontium LT8912B DSI/HDMI bridge"
100 Driver for Lontium LT8912B DSI to HDMI bridge
108 tristate "Lontium LT9211 DSI/LVDS/DPI bridge"
115 Driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI
116 input to Single-link/Dual-Link DSI/LVDS or Single DPI output bridge
121 tristate "Lontium LT9611 DSI/HDMI bridge"
129 Driver for Lontium LT9611 DSI to HDMI bridge
[all …]
/openbmc/linux/drivers/gpu/drm/msm/
H A DKconfig100 bool "Enable DSI support in MSM DRM driver"
106 Choose this option if you have a need for MIPI DSI connector
110 bool "Enable DSI 28nm PHY driver in MSM DRM"
114 Choose this option if the 28nm DSI PHY is used on the platform.
117 bool "Enable DSI 20nm PHY driver in MSM DRM"
121 Choose this option if the 20nm DSI PHY is used on the platform.
124 bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
128 Choose this option if the 28nm DSI PHY 8960 variant is used on the
132 bool "Enable DSI 14nm PHY driver in MSM DRM (used by MSM8996/APQ8096)"
136 Choose this option if DSI PHY on 8996 is used on the platform.
[all …]
H A DNOTES12 Plus a handful of blocks around them for HDMI/DSI/etc output.
18 But, HDMI/DSI/etc blocks seem like they can be shared across multiple
40 encoder -> DTV/LCDC/DSI (within MDP4) /
41 connector -> HDMI/DSI/etc --> other device(s)
54 connector -> HDMI/DSI/eDP/etc --> other device(s)
57 than needing a different implementation for DTV, DSI, etc. (Ie. the
60 Also unlike MDP4, with MDP5 all the IRQs for other blocks (HDMI, DSI,
/openbmc/linux/drivers/gpu/drm/panel/
H A DKconfig56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57 the host and backlight is controlled through DSI commands.
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
77 45NA WUXGA PANEL DSI Video Mode panel
80 tristate "Generic DSI command mode panels"
85 DRM panel driver for DSI command mode panels with support for
134 The panel has a resolution of 1080x2246. It provides a MIPI DSI
144 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
154 4-lane 800x1280 MIPI DSI panel.
157 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
[all …]
/openbmc/linux/Documentation/devicetree/bindings/display/ti/
H A Dti,omap5-dss.txt21 - DSS Submodules: RFBI, DSI, HDMI
59 DSI
66 - interrupts: the DSI interrupt line
68 - vdd-supply: power supply for DSI
73 - Video port for DSI output
74 - DSI controlled peripherals
76 DSI Endpoint required properties:
77 - lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
H A Dti,omap4-dss.txt21 - DSS Submodules: RFBI, VENC, DSI, HDMI
78 DSI
85 - interrupts: the DSI interrupt line
87 - vdd-supply: power supply for DSI
92 - Video port for DSI output
93 - DSI controlled peripherals
95 DSI Endpoint required properties:
96 - lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
H A Dti,omap3-dss.txt72 DSI
79 - interrupts: the DSI interrupt line
81 - vdd-supply: power supply for DSI
85 DSI Endpoint required properties:
86 - lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
/openbmc/linux/drivers/gpu/drm/bridge/cadence/
H A DKconfig3 tristate "Cadence DPI/DSI bridge"
11 Support Cadence DPI to DSI bridge. This is an internal
17 bool "J721E Cadence DSI wrapper support"
20 Support J721E Cadence DSI wrapper. The wrapper manages
21 the routing of the DSS DPI signal to the Cadence DSI.
/openbmc/linux/drivers/video/fbdev/omap2/omapfb/dss/
H A DKconfig34 <debugfs>/omapdss/dsi_irq for DSI interrupts.
75 bool "DSI support"
77 MIPI DSI (Display Serial Interface) support.
79 DSI is a high speed half-duplex serial interface between the host
82 See https://www.mipi.org/ for DSI specifications.
/openbmc/linux/drivers/gpu/drm/renesas/rcar-du/
H A DKconfig50 bool "R-Car DU MIPI DSI Encoder Support"
55 Enable support for the R-Car Display Unit embedded MIPI DSI encoders.
64 tristate "RZ/G2L MIPI DSI Encoder Support"
69 Enable support for the RZ/G2L Display Unit embedded MIPI DSI encoders.
/openbmc/linux/Documentation/devicetree/bindings/display/hisilicon/
H A Ddw-dsi.txt1 Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver
3 A DSI Host Controller resides in the middle of display controller and external
11 - ports: contains DSI controller input and output sub port.
H A Dhisi-ade.txt5 timing stream and transfer to DSI.
28 remote-endpoint set to the phandle of the connected DSI input endpoint.
/openbmc/linux/drivers/gpu/drm/omapdrm/
H A DKconfig42 <debugfs>/omapdss/dsi_irq for DSI interrupts.
93 bool "DSI support"
97 MIPI DSI (Display Serial Interface) support.
99 DSI is a high speed half-duplex serial interface between the host
102 See http://www.mipi.org/ for DSI specifications.
/openbmc/linux/Documentation/gpu/
H A Dtegra.rst22 outputs, such as RGB, HDMI, DSI, and DisplayPort.
80 controllers can drive both DSI outputs and both SOR outputs, the third cannot
81 drive any DSI.
103 longer do and instead provide standard interfaces such as DSI and eDP/DP.
111 the more standard DSI and eDP interfaces.
120 DSI subsection
123 Although Tegra has supported DSI since Tegra30, the controller has changed in
125 boards prior to Dalmore (Tegra114) have made use of DSI, only Tegra114 and
/openbmc/linux/drivers/gpu/drm/stm/
H A DKconfig18 tristate "STMicroelectronics specific extensions for Synopsys MIPI DSI"
22 Choose this option for MIPI DSI support on STMicroelectronics SoC.
/openbmc/u-boot/drivers/video/stm32/
H A DKconfig13 DSI. This option enables these supports which can be used on
14 devices which have RGB TFT or DSI display connected.
/openbmc/linux/drivers/phy/freescale/
H A DKconfig21 tristate "Mixel MIPI DSI PHY support"
27 Enable this to add support for the Mixel DSI PHY as found
/openbmc/u-boot/arch/arm/mach-rockchip/rk3368/
H A DKconfig21 - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group)
39 with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS
/openbmc/linux/drivers/video/fbdev/omap2/omapfb/displays/
H A DKconfig44 tristate "Generic DSI Command Mode Panel"
48 Driver for generic DSI command mode panels.
/openbmc/linux/drivers/phy/mediatek/
H A DKconfig62 tristate "MediaTek MIPI-DSI Driver"
68 Support MIPI DSI for Mediatek SoCs.
/openbmc/linux/arch/arm/boot/dts/st/
H A Dstm32f469.dtsi11 resets = <&rcc STM32F4_APB2_RESET(DSI)>;
/openbmc/linux/drivers/gpu/drm/sun4i/
H A DKconfig46 tristate "Allwinner A31/A64 MIPI-DSI Controller Support"
54 MIPI-DSI support. If M is selected the module will be called
/openbmc/u-boot/arch/arm/mach-rockchip/rk3399/
H A DKconfig28 * HDMI, eDP, MIPI-DSI, MIPI-DSI/CSI and MIPI-CSI

1234