| /openbmc/linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mn-ddr3l-evk.dts | 15 cpu-supply = <&buck1>;
19 cpu-supply = <&buck1>;
23 cpu-supply = <&buck1>;
27 cpu-supply = <&buck1>;
40 buck1: BUCK1 { label
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | ti,lp87524-q1.yaml | 43 - buck1
59 - buck1-in-supply
80 buck1-in-supply = <&vdd_5v0>;
92 buck1_reg: buck1 {
93 regulator-name = "buck1";
|
| H A D | lp873x.txt | 12 buck0, buck1, ldo0 or ldo1.
24 buck1-in-supply = <&vsys_3v3>;
40 lp8733_buck1: buck1 {
41 regulator-name = "lp8733-buck1";
|
| H A D | max8998.txt | 26 - max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used
32 - max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from
43 Additional properties required if max8998,pmic-buck1-dvs-gpios is defined:
44 - max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts
45 for buck1 regulator that can be selected using dvs gpio.
91 max8998,pmic-buck1-default-dvs-idx = <0>;
92 max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
94 max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
|
| H A D | da9052-i2c.txt | 19 buck1 : regulator BUCK CORE
46 buck1 {
|
| H A D | da9062.txt | 57 buck1 : BUCK_1
68 buck1 : BUCK_1
107 DA9062_BUCK1: buck1 {
|
| H A D | richtek,rt5120.yaml | 50 description: phandle for buck1 input power source
133 buck1 {
134 regulator-name = "rt5120-buck1";
|
| H A D | da9055.txt | 33 buck1 : regulator BUCK1
57 buck1: BUCK1 {
|
| H A D | rohm,bd71815-pmic.yaml | 119 buck1: buck1 {
120 regulator-name = "buck1";
|
| /openbmc/linux/Documentation/devicetree/bindings/regulator/ |
| H A D | maxim,max8997.yaml | 33 max8997,pmic-buck1-dvs-voltage:
38 A set of 8 voltage values in micro-volt (uV) units for buck1 when
69 max8997,pmic-buck1-uses-gpio-dvs:
72 buck1 can be controlled by GPIO DVS.
247 - max8997,pmic-buck1-dvs-voltage
254 max8997,pmic-buck1-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
263 - max8997,pmic-buck1-uses-gpio-dvs
270 max8997,pmic-buck1-dvs-voltage:
296 max8997,pmic-buck1-uses-gpio-dvs;
307 max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
[all …]
|
| H A D | 88pg86x.txt | 7 Optional subnodes for regulators: "buck1", "buck2", using common regulator
16 vcpu: buck1 {
|
| H A D | richtek,rt5190a-regulator.yaml | 61 regulator description for buck1 to buck4, and ldo.
66 buck operating mode, only buck1/4 support mode operating.
107 rt5190_buck1: buck1 {
108 regulator-name = "rt5190a-buck1";
|
| H A D | mt6360-regulator.yaml | 14 after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7
48 buck1 {
49 regulator-name = "mt6360,buck1";
|
| H A D | mps,mpq7932.yaml | 52 buck1 {
53 regulator-name = "buck1";
|
| H A D | 88pm800.txt | 14 buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
24 buck1 {
|
| H A D | mps,mp5416.yaml | 61 buck1 {
62 regulator-name = "buck1";
|
| H A D | richtek,rtq2134-regulator.yaml | 71 buck1 {
72 regulator-name = "rtq2134-buck1";
|
| H A D | mps,mpq7920.yaml | 97 buck1 {
98 regulator-name = "buck1";
|
| H A D | ti,tps65219.yaml | 103 buck1-supply = <&vcc_3v3_sys>;
118 buck1_reg: buck1 {
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | dra71-evm.dts | 62 buck1-in-supply =<&vsys_3v3>;
76 lp8733_buck1_reg: buck1 {
78 regulator-name = "lp8733-buck1";
108 buck1-in-supply =<&vsys_3v3>;
122 lp8732_buck1_reg: buck1 {
124 regulator-name = "lp8732-buck1";
|
| /openbmc/linux/arch/arm/boot/dts/ti/omap/ |
| H A D | dra71-evm.dts | 87 buck1-in-supply =<&vsys_3v3>;
101 lp8733_buck1_reg: buck1 {
103 regulator-name = "lp8733-buck1";
135 buck1-in-supply =<&vsys_3v3>;
149 lp8732_buck1_reg: buck1 {
151 regulator-name = "lp8732-buck1";
|
| /openbmc/linux/arch/arm/boot/dts/synaptics/ |
| H A D | berlin2cd-valve-steamlink.dts | 41 * with buck1 providing SoC power (set up by bootloader to 1.325V or
49 vcpu: buck1 {
|
| /openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx7d-remarkable2.dts | 95 cpu-supply = <&buck1>;
145 buck1: buck1 { label
146 regulator-name = "buck1";
|
| /openbmc/linux/arch/arm/boot/dts/samsung/ |
| H A D | s5pv210-aquila.dts | 77 max8998,pmic-buck1-default-dvs-idx = <0>;
78 max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
80 max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
|
| /openbmc/linux/arch/arm64/boot/dts/ti/ |
| H A D | k3-am62-lp-sk.dts | 156 buck1-supply = <&vcc_3v3_sys>;
172 buck1_reg: buck1 {
|