/openbmc/linux/drivers/regulator/ |
H A D | ti-abb-regulator.c | 141 return !!(readl(abb->int_base) & abb->txdone_mask); in ti_abb_check_txdone() 150 writel(abb->txdone_mask, abb->int_base); in ti_abb_clear_txdone() 218 val &= ~(abb->ldovbb_override_mask | abb->ldovbb_vset_mask); in ti_abb_program_ldovbb() 312 if (!abb) { in ti_abb_set_voltage_sel() 348 oinfo = &abb->info[abb->current_info_idx]; in ti_abb_set_voltage_sel() 381 if (!abb) { in ti_abb_get_voltage_sel() 714 if (!abb) in ti_abb_probe() 719 if (abb->regs->setup_off || abb->regs->control_off) { in ti_abb_probe() 724 abb->setup_reg = abb->base + abb->regs->setup_off; in ti_abb_probe() 725 abb->control_reg = abb->base + abb->regs->control_off; in ti_abb_probe() [all …]
|
H A D | Makefile | 168 obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
|
/openbmc/linux/Documentation/devicetree/bindings/regulator/ |
H A D | ti-abb-regulator.txt | 5 - "ti,abb-v1" for older SoCs like OMAP3 6 - "ti,abb-v2" for newer SoCs like OMAP4, OMAP5 7 - "ti,abb-v3" for a generic definition where setup and control registers are 12 - "base-address" - contains base address of ABB module (ti,abb-v1,ti,abb-v2) 14 - "setup-address" - contains setup register address of ABB module (ti,abb-v3) 69 abb_x: regulator-abb-x { 70 compatible = "ti,abb-v1"; 89 abb_y: regulator-abb-y { 90 compatible = "ti,abb-v2"; 110 abb_z: regulator-abb-z { [all …]
|
/openbmc/linux/arch/powerpc/boot/dts/ |
H A D | socrates.dts | 12 model = "abb,socrates"; 13 compatible = "abb,socrates"; 290 compatible = "abb,socrates-fpga-pic"; 300 compatible = "abb,socrates-spi"; 307 compatible = "abb,socrates-nand";
|
/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | omap443x.dtsi | 45 abb_mpu: regulator-abb-mpu { 62 abb_iva: regulator-abb-iva {
|
H A D | omap4460.dtsi | 42 abb_mpu: regulator-abb-mpu { 60 abb_iva: regulator-abb-iva {
|
H A D | omap36xx.dtsi | 94 abb_mpu_iva: regulator-abb-mpu { 95 compatible = "ti,abb-v1";
|
H A D | dra7.dtsi | 641 abb_mpu: regulator-abb-mpu { 642 compatible = "ti,abb-v3"; 674 abb_ivahd: regulator-abb-ivahd { 675 compatible = "ti,abb-v3"; 707 abb_dspeve: regulator-abb-dspeve { 708 compatible = "ti,abb-v3"; 740 abb_gpu: regulator-abb-gpu { 741 compatible = "ti,abb-v3";
|
H A D | omap5.dtsi | 653 abb_mpu: regulator-abb-mpu { 654 compatible = "ti,abb-v2"; 683 abb_mm: regulator-abb-mm { 684 compatible = "ti,abb-v2";
|
H A D | omap4.dtsi | 458 abb_mpu: regulator-abb-mpu { 459 compatible = "ti,abb-v2"; 471 abb_iva: regulator-abb-iva { 472 compatible = "ti,abb-v2";
|
/openbmc/u-boot/arch/arm/mach-omap2/omap5/ |
H A D | Makefile | 12 obj-y += abb.o
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | omap36xx.dtsi | 45 abb_mpu_iva: regulator-abb-mpu { 46 compatible = "ti,abb-v1";
|
H A D | dra7.dtsi | 1163 abb_mpu: regulator-abb-mpu { 1164 compatible = "ti,abb-v3"; 1196 abb_ivahd: regulator-abb-ivahd { 1197 compatible = "ti,abb-v3"; 1229 abb_dspeve: regulator-abb-dspeve { 1230 compatible = "ti,abb-v3"; 1262 abb_gpu: regulator-abb-gpu { 1263 compatible = "ti,abb-v3";
|
/openbmc/u-boot/arch/arm/mach-omap2/ |
H A D | Makefile | 27 obj-y += abb.o
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6dl-aristainetos_7.dts | 13 compatible = "abb,aristainetos-imx6dl-7", "fsl,imx6dl";
|
H A D | imx6dl-aristainetos_4.dts | 13 compatible = "abb,aristainetos-imx6dl-4", "fsl,imx6dl";
|
H A D | imx6dl-aristainetos2_7.dts | 49 compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
|
H A D | imx6dl-aristainetos2_4.dts | 49 compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl";
|
/openbmc/linux/Documentation/devicetree/bindings/arm/ |
H A D | fsl.yaml | 435 - abb,aristainetos-imx6dl-4 # aristainetos i.MX6 Dual Lite Board 4 436 - abb,aristainetos-imx6dl-7 # aristainetos i.MX6 Dual Lite Board 7 437 - abb,aristainetos2-imx6dl-4 # aristainetos2 i.MX6 Dual Lite Board 4 438 - abb,aristainetos2-imx6dl-7 # aristainetos2 i.MX6 Dual Lite Board 7
|
/openbmc/linux/Documentation/devicetree/bindings/ |
H A D | vendor-prefixes.yaml | 32 "^abb,.*":
|