| /openbmc/linux/drivers/usb/misc/ |
| H A D | trancevibrator.c | 30 unsigned int speed; member
39 return sprintf(buf, "%d\n", tv->speed); in speed_show()
56 old = tv->speed; in speed_store()
57 tv->speed = temp; in speed_store()
59 dev_dbg(&tv->udev->dev, "speed = %d\n", tv->speed); in speed_store()
65 tv->speed, /* speed value */ in speed_store()
68 tv->speed = old; in speed_store()
74 static DEVICE_ATTR_RW(speed);
|
| /openbmc/linux/Documentation/hwmon/ |
| H A D | g762.rst | 5 and performs closed-loop or open-loop control of the fan speed. Two
25 set desired fan speed. This only makes sense in closed-loop
26 fan speed control (i.e. when pwm1_enable is set to 2).
49 set current fan speed control mode i.e. 1 for manual fan
50 speed control (open-loop) via pwm1 described below, 2 for
51 automatic fan speed control (closed-loop) via fan1_target
60 it run at full speed.
63 when current fan speed control mode is open-loop ('pwm1_enable' set to 1),
64 the fan speed is programmed by setting a value between 0 and 255 via 'pwm1'
65 entry (0 stops the fan, 255 makes it run at full speed). In closed-loop mode
[all …]
|
| /openbmc/u-boot/drivers/i2c/ |
| H A D | omap24xx_i2c.c | 138 unsigned int speed; member
183 speed /= 1000; /* convert speed to kHz */ in omap24_i2c_findpsc()
185 if (speed > 100) in omap24_i2c_findpsc()
194 if (speed > 100) { in omap24_i2c_findpsc()
198 scl = internal_clk / speed; in omap24_i2c_findpsc()
309 if (speed >= OMAP_I2C_HIGH_SPEED) { in __omap24_i2c_setspeed()
347 psc = omap24_i2c_findpsc(&scll, &sclh, speed); in __omap24_i2c_setspeed()
355 *waitdelay = (10000000 / speed) * 2; in __omap24_i2c_setspeed()
915 adap->speed = speed; in omap24_i2c_setspeed()
1032 priv->speed = speed;
[all …]
|
| H A D | davinci_i2c.c | 26 uint speed; member
88 uint speed) in _davinci_i2c_setspeed() argument
103 uint speed, int slaveadd) in _davinci_i2c_init() argument
110 _davinci_i2c_setspeed(i2c_base, speed); in _davinci_i2c_init()
368 adap->speed = speed; in davinci_i2c_setspeed()
369 ret = _davinci_i2c_setspeed(i2c_base, speed); in davinci_i2c_setspeed()
379 adap->speed = speed; in davinci_i2c_init()
380 _davinci_i2c_init(i2c_base, speed, slaveadd); in davinci_i2c_init()
463 i2c_bus->speed = speed;
464 return _davinci_i2c_setspeed(i2c_bus->regs, speed);
[all …]
|
| H A D | fsl_i2c.c | 120 uint i2c_clk, uint speed) in set_i2c_bus_speed() argument
122 ushort divider = min(i2c_clk / speed, (uint)USHRT_MAX); in set_i2c_bus_speed()
144 speed = i2c_clk / divider; /* Fake something */ in set_i2c_bus_speed()
162 speed = i2c_clk / est_div; in set_i2c_bus_speed()
167 debug("a: %d, b: %d, speed: %d\n", a, b, speed); in set_i2c_bus_speed()
181 debug("FDR: 0x%.2x, speed: %d\n", fdr, speed); in set_i2c_bus_speed()
193 speed = i2c_clk / fsl_i2c_speed_map[i].divider; in set_i2c_bus_speed()
199 return speed; in set_i2c_bus_speed()
275 set_i2c_bus_speed(base, i2c_clk, speed); in __i2c_init()
487 uint speed, int i2c_clk) in __i2c_set_bus_speed() argument
[all …]
|
| /openbmc/linux/drivers/net/phy/ |
| H A D | phy_led_triggers.c | 9 unsigned int speed) in phy_speed_to_led_trigger() argument
14 if (phy->phy_led_triggers[i].speed == speed) in phy_speed_to_led_trigger()
36 if (phy->speed == 0) in phy_led_trigger_change_speed()
39 plt = phy_speed_to_led_trigger(phy, phy->speed); in phy_led_trigger_change_speed()
43 phy->speed); in phy_led_trigger_change_speed()
69 unsigned int speed, in phy_led_trigger_register() argument
72 plt->speed = speed; in phy_led_trigger_register()
|
| H A D | phy-core.c | 14 const char *phy_speed_to_str(int speed) in phy_speed_to_str() argument
21 switch (speed) { in phy_speed_to_str()
298 if (p->speed == speed && p->duplex == duplex) { in phy_lookup_setting()
303 if (!match && p->speed <= speed) in phy_lookup_setting()
307 if (p->speed < speed) in phy_lookup_setting()
341 if (p->speed > max_speed) in __set_linkmode_max_speed()
452 phydev->speed = settings[i].speed; in phy_resolve_aneg_linkmode()
485 speed = settings[i].speed; in phy_check_downshift()
489 if (speed == SPEED_UNKNOWN || phydev->speed >= speed) in phy_check_downshift()
493 phy_speed_to_str(speed), phy_speed_to_str(phydev->speed)); in phy_check_downshift()
[all …]
|
| H A D | et1011c.c | 63 static int speed; in et1011c_read_status() local
69 if (speed != phydev->speed) { in et1011c_read_status()
70 speed = phydev->speed; in et1011c_read_status()
|
| /openbmc/linux/arch/mips/cavium-octeon/executive/ |
| H A D | cvmx-helper-spi.c | 154 result.s.speed = 10000; in __cvmx_helper_spi_link_get()
160 switch (inband.s.speed) { in __cvmx_helper_spi_link_get()
162 result.s.speed = 10; in __cvmx_helper_spi_link_get()
165 result.s.speed = 100; in __cvmx_helper_spi_link_get()
168 result.s.speed = 1000; in __cvmx_helper_spi_link_get()
171 result.s.speed = 0; in __cvmx_helper_spi_link_get()
180 result.s.speed = 10000; in __cvmx_helper_spi_link_get()
|
| /openbmc/u-boot/drivers/net/phy/ |
| H A D | xilinx_phy.c | 57 phydev->speed = SPEED_1000; in xilinxphy_startup()
61 phydev->speed = SPEED_100; in xilinxphy_startup()
65 phydev->speed = SPEED_10; in xilinxphy_startup()
80 phydev->speed = SPEED_1000; in xilinxphy_startup()
82 phydev->speed = SPEED_100; in xilinxphy_startup()
84 phydev->speed = SPEED_10; in xilinxphy_startup()
93 phydev->speed = SPEED_1000; in xilinxphy_startup()
|
| H A D | et1011c.c | 44 int speed; in et1011c_parse_status() local
53 speed = mii_reg & ET1011C_SPEED_MASK; in et1011c_parse_status()
54 switch (speed) { in et1011c_parse_status()
56 phydev->speed = SPEED_1000; in et1011c_parse_status()
69 phydev->speed = SPEED_100; in et1011c_parse_status()
72 phydev->speed = SPEED_10; in et1011c_parse_status()
|
| H A D | realtek.c | 197 unsigned int speed; in rtl8211x_parse_status() local
236 speed = (mii_reg & MIIM_RTL8211x_PHYSTAT_SPEED); in rtl8211x_parse_status()
238 switch (speed) { in rtl8211x_parse_status()
240 phydev->speed = SPEED_1000; in rtl8211x_parse_status()
243 phydev->speed = SPEED_100; in rtl8211x_parse_status()
246 phydev->speed = SPEED_10; in rtl8211x_parse_status()
254 unsigned int speed; in rtl8211f_parse_status() local
283 switch (speed) { in rtl8211f_parse_status()
285 phydev->speed = SPEED_1000; in rtl8211f_parse_status()
288 phydev->speed = SPEED_100; in rtl8211f_parse_status()
[all …]
|
| /openbmc/linux/crypto/ |
| H A D | xor.c | 85 int speed; in do_xor_speed() local
112 speed = (1000 * REPS * BENCH_SIZE) / (unsigned int)ktime_to_ns(min); in do_xor_speed()
113 tmpl->speed = speed; in do_xor_speed()
115 pr_info(" %-16s: %5d MB/sec\n", tmpl->name, speed); in do_xor_speed()
152 if (f->speed > fastest->speed) in calibrate_xor_blocks()
156 fastest->name, fastest->speed); in calibrate_xor_blocks()
|
| /openbmc/linux/sound/oss/dmasound/ |
| H A D | dmasound_atari.c | 393 long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; in ata_ctx_law()
453 long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; in ata_ctx_s8()
507 long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; in ata_ctx_u8()
563 long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; in ata_ctx_s16be()
619 long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; in ata_ctx_u16be()
677 long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; in ata_ctx_s16le()
735 long hSpeed = dmasound.hard.speed, sSpeed = dmasound.soft.speed; in ata_ctx_u16le()
945 dmasound.hard.speed = 6258; in TTInit()
1512 .speed = 8195
1519 .speed = 12517
[all …]
|
| /openbmc/phosphor-fan-presence/monitor/example/ |
| H A D | monitor.yaml | 18 # [Time (in secs) actual speed can be outside of deviation of
19 # target speed]
21 # [Percentage that actual speed must be within target speed]
25 # sensors: [array of speed sensors for the fan]
28 # setting a fan speed (otherwise just for reads)]
36 # fan speed. Default is 1 for fan speed target;
38 # offset [The offset to add to calculate the expected fan speed.
39 # Default is 0 for fan speed target;
55 # has a nonzero speed.]
63 # the target speed for the allowed out of range time, if at least
[all …]
|
| /openbmc/linux/drivers/gpu/drm/amd/pm/powerplay/hwmgr/ |
| H A D | vega20_thermal.c | 118 uint32_t *speed) in vega20_fan_ctrl_get_fan_speed_pwm() argument
134 *speed = MIN((uint32_t)tmp64, 255); in vega20_fan_ctrl_get_fan_speed_pwm()
140 uint32_t speed) in vega20_fan_ctrl_set_fan_speed_pwm() argument
147 speed = MIN(speed, 255); in vega20_fan_ctrl_set_fan_speed_pwm()
158 tmp64 = (uint64_t)speed * duty100; in vega20_fan_ctrl_set_fan_speed_pwm()
181 int vega20_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed) in vega20_fan_ctrl_get_fan_speed_rpm() argument
183 *speed = 0; in vega20_fan_ctrl_get_fan_speed_rpm()
185 return vega20_get_current_rpm(hwmgr, speed); in vega20_fan_ctrl_get_fan_speed_rpm()
188 int vega20_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed) in vega20_fan_ctrl_set_fan_speed_rpm() argument
194 if (!speed) in vega20_fan_ctrl_set_fan_speed_rpm()
[all …]
|
| H A D | smu7_thermal.c | 55 uint32_t *speed) in smu7_fan_ctrl_get_fan_speed_pwm() argument
75 *speed = MIN((uint32_t)tmp64, 255); in smu7_fan_ctrl_get_fan_speed_pwm()
80 int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed) in smu7_fan_ctrl_get_fan_speed_rpm() argument
97 *speed = 60 * crystal_clock_freq * 10000 / tach_period; in smu7_fan_ctrl_get_fan_speed_rpm()
204 uint32_t speed) in smu7_fan_ctrl_set_fan_speed_pwm() argument
213 speed = MIN(speed, 255); in smu7_fan_ctrl_set_fan_speed_pwm()
224 tmp64 = (uint64_t)speed * duty100; in smu7_fan_ctrl_set_fan_speed_pwm()
270 speed == 0 || in smu7_fan_ctrl_set_fan_speed_rpm()
271 (speed < hwmgr->thermal_controller.fanInfo.ulMinRPM) || in smu7_fan_ctrl_set_fan_speed_rpm()
272 (speed > hwmgr->thermal_controller.fanInfo.ulMaxRPM)) in smu7_fan_ctrl_set_fan_speed_rpm()
[all …]
|
| /openbmc/qemu/tests/qemu-iotests/ |
| H A D | 218.out | 8 {"data": {"device": "mirror", "len": 1048576, "offset": 65536, "speed": 65536, "type": "mirror"}, "…
14 {"data": {"device": "mirror", "len": 1048576, "offset": 65536, "speed": 65536, "type": "mirror"}, "…
20 {"data": {"device": "mirror", "len": 1048576, "offset": 1048576, "speed": 0, "type": "mirror"}, "ev…
23 {"data": {"device": "mirror", "len": 1048576, "offset": 1048576, "speed": 0, "type": "mirror"}, "ev…
27 {"data": {"device": "mirror", "len": 1048576, "offset": 1048576, "speed": 0, "type": "mirror"}, "ev…
30 {"data": {"device": "mirror", "len": 1048576, "offset": 1048576, "speed": 0, "type": "mirror"}, "ev…
|
| /openbmc/linux/drivers/ata/ |
| H A D | libata-pata-timings.c | 115 int ata_timing_compute(struct ata_device *adev, unsigned short speed, in ata_timing_compute() argument
125 s = ata_timing_find_mode(speed); in ata_timing_compute()
139 if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) { in ata_timing_compute()
140 if (speed <= XFER_PIO_2) in ata_timing_compute()
142 else if ((speed <= XFER_PIO_4) || in ata_timing_compute()
143 (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) in ata_timing_compute()
145 } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) in ata_timing_compute()
163 if (speed > XFER_PIO_6) { in ata_timing_compute()
|
| /openbmc/linux/drivers/net/ethernet/ibm/ehea/ |
| H A D | ehea_ethtool.c | 25 u32 speed; in ehea_get_link_ksettings() local
36 speed = SPEED_10; in ehea_get_link_ksettings()
39 speed = SPEED_100; in ehea_get_link_ksettings()
42 speed = SPEED_1000; in ehea_get_link_ksettings()
45 speed = SPEED_10000; in ehea_get_link_ksettings()
48 speed = -1; in ehea_get_link_ksettings()
54 speed = SPEED_UNKNOWN; in ehea_get_link_ksettings()
57 cmd->base.speed = speed; in ehea_get_link_ksettings()
59 if (cmd->base.speed == SPEED_10000) { in ehea_get_link_ksettings()
96 switch (cmd->base.speed) { in ehea_set_link_ksettings()
|
| /openbmc/u-boot/board/ti/ks2_evm/ |
| H A D | board_k2l.c | 65 int speed; in get_pll_init_data() local
70 speed = get_max_dev_speed(speeds); in get_pll_init_data()
71 data = &core_pll_config[speed]; in get_pll_init_data()
74 speed = get_max_arm_speed(speeds); in get_pll_init_data()
75 data = &tetris_pll_config[speed]; in get_pll_init_data()
|
| H A D | board_k2hk.c | 77 int speed; in get_pll_init_data() local
82 speed = get_max_dev_speed(speeds); in get_pll_init_data()
83 data = &core_pll_config[speed]; in get_pll_init_data()
86 speed = get_max_arm_speed(speeds); in get_pll_init_data()
87 data = &tetris_pll_config[speed]; in get_pll_init_data()
|
| /openbmc/linux/drivers/net/ethernet/microchip/sparx5/ |
| H A D | sparx5_port.c | 39 status->speed = SPEED_10; in decode_sgmii_word()
42 status->speed = SPEED_100; in decode_sgmii_word()
45 status->speed = SPEED_1000; in decode_sgmii_word()
165 status->speed = port->conf.speed; in sparx5_get_port_status()
476 switch (speed) { in sparx5_port_fifo_sz()
605 switch (speed) { in sparx5_port_fwd_urg()
685 int portmode, err, speed = conf->speed; in sparx5_serdes_set() local
693 speed = SPEED_25000; in sparx5_serdes_set()
695 speed = SPEED_10000; in sparx5_serdes_set()
697 speed = SPEED_5000; in sparx5_serdes_set()
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/intel/socfpga/ |
| H A D | socfpga_cyclone5_chameleon96.dts | 73 /* On Low speed expansion */
79 /* On Low speed expansion */
89 /* On High speed expansion */
101 /* On High speed expansion */
107 /* On Low speed expansion */
113 /* On Low speed expansion */
119 /* On Low speed expansion */
|
| /openbmc/qemu/hw/net/rocker/ |
| H A D | rocker_fp.c | 36 uint32_t speed; member
61 value->speed = port->speed; in fp_port_get_info()
89 int fp_port_get_settings(FpPort *port, uint32_t *speed, in fp_port_get_settings() argument
92 *speed = port->speed; in fp_port_get_settings()
99 int fp_port_set_settings(FpPort *port, uint32_t speed, in fp_port_set_settings() argument
104 port->speed = speed; in fp_port_set_settings()
264 port->speed = 10000; /* 10Gbps */ in fp_port_reset()
|