Home
last modified time | relevance | path

Searched refs:a (Results 19026 – 19050 of 22310) sorted by relevance

1...<<761762763764765766767768769770>>...893

/openbmc/linux/arch/arm/boot/dts/st/
H A Dste-ux500-samsung-gavini.dts122 * LCD_PWR_EN controls both a 3.0V and 1.8V output.
150 * This regulator is a GPIO line that drives the Broadcom WLAN
153 * WLAN_RST_N on the schematic but it is not a reset line.
448 /* FIXME: add a device for the GPS here */
527 * The MPU-3050 acts as a hub for the
/openbmc/linux/mm/damon/
H A Dcore.c1540 struct damon_system_ram_region *a = arg; in walk_system_ram() local
1542 if (a->end - a->start < resource_size(res)) { in walk_system_ram()
1543 a->start = res->start; in walk_system_ram()
1544 a->end = res->end; in walk_system_ram()
/openbmc/linux/net/bluetooth/
H A Dsmp.c1429 u8 *na, *nb, a[7], b[7]; in sc_mackey_and_ltk() local
1439 memcpy(a, &hcon->init_addr, 6); in sc_mackey_and_ltk()
1441 a[6] = hcon->init_addr_type; in sc_mackey_and_ltk()
1454 memcpy(a, &hcon->init_addr, 6); in sc_dhkey_check()
1456 a[6] = hcon->init_addr_type; in sc_dhkey_check()
1460 local_addr = a; in sc_dhkey_check()
1465 remote_addr = a; in sc_dhkey_check()
2897 memcpy(a, &hcon->init_addr, 6); in smp_cmd_dhkey_check()
2899 a[6] = hcon->init_addr_type; in smp_cmd_dhkey_check()
2903 local_addr = a; in smp_cmd_dhkey_check()
[all …]
/openbmc/linux/drivers/video/fbdev/core/
H A Dfbcon.c170 #define divides(a, b) ((!(a) || (b)%(a)) ? 0 : 1) argument
2631 u16 a = scr_readw(p); in fbcon_invert_region() local
2633 a ^= 0x0800; in fbcon_invert_region()
2635 a = ((a) & 0x11ff) | (((a) & 0xe000) >> 4) | in fbcon_invert_region()
2636 (((a) & 0x0e00) << 4); in fbcon_invert_region()
2638 a = ((a) & 0x88ff) | (((a) & 0x7000) >> 4) | in fbcon_invert_region()
2639 (((a) & 0x0700) << 4); in fbcon_invert_region()
2640 scr_writew(a, p++); in fbcon_invert_region()
/openbmc/u-boot/arch/arm/dts/
H A Drk3288-vyasa.dts6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
22 * obtaining a copy of this software and associated documentation
H A Dsun8i-a33.dtsi8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
24 * obtaining a copy of this software and associated documentation
H A Ddm816x.dtsi55 * XXX: Use a flat representation of the dm816x interconnect.
58 * for the moment, just use a fake OCP bus entry to represent
401 /* NOTE: USB needs a transceiver driver for phys to work */
H A Drk3288-phycore-som.dtsi8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
24 * obtaining a copy of this software and associated documentation
H A Drk3288-popmetal.dtsi4 * licensing only applies to this file, and not this project as a
7 * a) This file is free software; you can redistribute it and/or
20 * obtaining a copy of this software and associated documentation
H A Dmeson-gxl.dtsi681 * VPU_0 and VPU_1 muxed to a single clock by a glitch
683 * Same for VAPB but with a final gate after the glitch free mux.
/openbmc/u-boot/board/hisilicon/hikey/
H A DREADME10 * 802.11a/b/g/n WiFi, Bluetooth
94 the hisi-idt.py utility. Then connect a USB A to B mini cable from your PC to the USB OTG port of H…
100 2. Once LED 0 comes on solid, HiKey board should be detected as a fastboot device.
/openbmc/u-boot/doc/
H A DREADME.ae35047 3. Ping a server by mac driver
141 ./mkimage -A riscv -O linux -T kernel -C none -a 0x0000 -e 0x0000 -d bbl.bin bootmImage-bbl.bin
246 [ 1.372000] f0300000.serial: ttyS0 at MMIO 0xf0300020 (irq = 10, base_baud = 1228800) is a 16550A
/openbmc/linux/net/dccp/ccids/
H A Dccid2.c20 #define ccid2_pr_debug(format, a...) DCCP_PR_DEBUG(ccid2_debug, format, ##a) argument
22 #define ccid2_pr_debug(format, a...) argument
H A Dccid3.c29 #define ccid3_pr_debug(format, a...) DCCP_PR_DEBUG(ccid3_debug, format, ##a) argument
31 #define ccid3_pr_debug(format, a...) argument
/openbmc/openbmc/meta-openembedded/meta-python/recipes-devtools/python/python3-pybluez/
H A Dpy-3.11.patch22 diff --git a/bluez/btmodule.c b/bluez/btmodule.c
24 --- a/bluez/btmodule.c
82 diff --git a/bluez/pythoncapi_compat.h b/bluez/pythoncapi_compat.h
/openbmc/linux/arch/arm/boot/dts/nxp/lpc/
H A Dlpc18xx.dtsi6 * This code is released using a dual license strategy: BSD/GPL
527 <&pinctrl LPC_GPIO(4,8) LPC_PIN(a,1) 3>,
528 <&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4) 1>,
/openbmc/linux/arch/powerpc/boot/dts/
H A Dredwood.dts267 * to avoid putting a node for it in the tree, so the numbers
308 * to avoid putting a node for it in the tree, so the numbers
349 * to avoid putting a node for it in the tree, so the numbers
/openbmc/linux/arch/arm/boot/dts/nxp/mxs/
H A Dimx28-tx28.dts136 * a silly way to create a 1:1 relationship between the
260 sgtl5000: sgtl5000@a {
/openbmc/linux/tools/perf/tests/
H A Dmake206 # with the test itself as a value
404 # make_no_libbpf: NO_LIBBPF=1 --> NO_LIBBPF=1 FEATURES_DUMP=/a/b/BUILD_TEST_FEATURE_DUMP
405 # make_static: LDFLAGS=-static --> LDFLAGS=-static FEATURES_DUMP=/a/b/BUILD_TEST_FEATURE_DUMP_STATIC
/openbmc/linux/net/sched/
H A Dcls_flow.c62 unsigned long a = (unsigned long)addr; in addr_fold() local
64 return (a & 0xFFFFFFFF) ^ (BITS_PER_LONG > 32 ? a >> 32 : 0); in addr_fold()
/openbmc/linux/arch/arm/boot/dts/nxp/imx/
H A Dimx6ull-dhcom-som.dtsi54 /* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */
61 /* SoM with WiFi/BT: BT pin BT_REG_ON is connected to a DHCOM GPIO */
588 pinctrl_snvs_dhcom_a: snvs-dhcom-a-grp {
H A Dimx6q-ba16.dtsi9 * licensing only applies to this file, and not this project as a
12 * a) This file is free software; you can redistribute it and/or
24 * obtaining a copy of this software and associated documentation
/openbmc/linux/drivers/firmware/
H A Dqemu_fw_cfg.c302 static ssize_t fw_cfg_showrev(struct kobject *k, struct kobj_attribute *a, in fw_cfg_showrev() argument
433 static ssize_t fw_cfg_sysfs_attr_show(struct kobject *kobj, struct attribute *a, in fw_cfg_sysfs_attr_show() argument
437 struct fw_cfg_sysfs_attribute *attr = to_attr(a); in fw_cfg_sysfs_attr_show()
/openbmc/linux/arch/arm64/boot/dts/qcom/
H A Dmsm8998-oneplus-common.dtsi36 * That's a lot of clocks, but it's necessary due
239 * Configure a pull-up on 46 (RX). This is needed to
250 * Configure a pull-down on 47 (CTS) to match the pull
/openbmc/linux/arch/x86/crypto/
H A Dcast5-avx-x86_64-asm_64.S106 #define F_head(a, x, gi1, gi2, op0) \ argument
107 op0 a, RKM, x; \
115 #define F_tail(a, x, gi1, gi2, op1, op2, op3) \ argument

1...<<761762763764765766767768769770>>...893