/openbmc/linux/arch/arm/boot/dts/allwinner/ |
H A D | axp81x.dtsi | 8 * licensing only applies to this file, and not this project as a 11 * a) This file is free software; you can redistribute it and/or 24 * obtaining a copy of this software and associated documentation 147 /* RTC_LDO is a fixed, always-on regulator */
|
H A D | axp209.dtsi | 8 * licensing only applies to this file, and not this project as a 11 * a) This file is free software; you can redistribute it and/or 24 * obtaining a copy of this software and associated documentation 97 /* LDO1 is a fixed output regulator */
|
/openbmc/linux/Documentation/ABI/testing/ |
H A D | sysfs-bus-iio-timer-stm32 | 16 For instance a master timer can then be used 17 as a prescaler for a slave timer. 19 The trigger output send a positive pulse
|
/openbmc/linux/Documentation/hwmon/ |
H A D | corsair-psu.rst | 39 This driver implements the sysfs interface for the Corsair PSUs with a HID protocol 41 These power supplies provide access to a micro-controller with 2 attached 86 Flickering values in the rail voltage levels can be an indicator for a failing 88 30% of the wattage rating. If this does not happen, a fan failure is likely. The
|
H A D | coretemp.rst | 33 show the temperature of all cores inside a package under a single device 38 the actual value of temperature register is in fact a delta from TjMax. 59 On CPU models which support it, TjMax is read from a model-specific register. 62 as a module parameter (tjmax).
|
/openbmc/linux/drivers/gpu/drm/radeon/ |
H A D | evergreen.c | 1954 fixed20_12 a; in evergreen_dram_bandwidth() local 1974 fixed20_12 a; in evergreen_dram_bandwidth_for_display() local 1994 fixed20_12 a; in evergreen_data_return_bandwidth() local 2014 fixed20_12 a; in evergreen_dmif_request_bandwidth() local 2049 fixed20_12 a; in evergreen_average_bandwidth() local 2075 fixed20_12 a, b, c; in evergreen_latency_watermark() local 2080 a.full = dfixed_const(2); in evergreen_latency_watermark() 2092 a.full = dfixed_div(a, b); in evergreen_latency_watermark() 2100 a.full = dfixed_div(a, b); in evergreen_latency_watermark() 2134 fixed20_12 a; in evergreen_check_latency_hiding() local [all …]
|
/openbmc/linux/Documentation/i2c/busses/ |
H A D | i2c-ali15x3.rst | 27 the BIOS. Does not do a PCI force; the device must still be present in 36 by a power cycle. Cause unknown (see Issues below). 45 The M1543C is a South bridge for desktop systems. 47 The M1541 is a South bridge for portable systems. 84 If you have a M1533 or M1543C on the board and you get
|
/openbmc/linux/Documentation/devicetree/bindings/sound/ |
H A D | st,sta350.txt | 9 - reset-gpios: a GPIO spec for the reset pin. If specified, it will be 12 - power-down-gpios: a GPIO spec for the power down pin. If specified, 90 If present, a mute output will be activated in ase the volume will 91 reach a value lower than -76 dBFS. 109 value. If not specified, a divider of 1 will be used. Allowed values
|
/openbmc/linux/Documentation/driver-api/rapidio/ |
H A D | mport_cdev.rst | 11 received from other members of RapidIO.org. The objective was to create a 13 devices directly to applications, in a manner that allows the numerous and 52 Supports blocking, asynchronous and posted (a.k.a 'fire-and-forget') data 83 This parameter set a maximum completion wait time for SYNC mode DMA
|
/openbmc/openbmc/meta-openembedded/meta-oe/licenses/ |
H A D | OGPL | 24 This software is furnished under a license and may be used 31 source systems. You must contact The Open Group for a license allowing 60 notice and should not be construed as a commitment by The Open Group 102 HP is a trademark of Hewlett-Packard Company 103 X Window System is a trademark of the Massachusetts Institute of
|
/openbmc/openbmc/meta-openembedded/meta-filesystems/recipes-utils/xfsdump/files/ |
H A D | remove-install-as-user.patch | 11 diff --git a/include/buildmacros b/include/buildmacros 13 --- a/include/buildmacros 24 diff --git a/include/install-sh b/include/install-sh 26 --- a/include/install-sh 98 -[ -n "$DIST_ROOT" -a $REAL_UID -ne 0 ] && CHOWN=true
|
/openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | pinctrl_spear.txt | 35 SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each 36 of these subnodes represents muxing for a pin, a group, or a list of pins or 43 - st,pins : An array of strings. Each string contains the name of a pin or
|
/openbmc/u-boot/drivers/pci/ |
H A D | Kconfig | 5 Enable support for PCI (Peripheral Interconnect Bus), a type of bus 26 measure when porting a board to use driver model for PCI. Once the 96 Tegra. Tegra20 has 2 root ports with a total of 4 lanes, Tegra30 has 97 3 root ports with a total of 6 lanes and Tegra124 has 2 root ports 98 with a total of 5 lanes. Some boards require this for Ethernet
|
/openbmc/u-boot/doc/ |
H A D | README.nokia_rx51 | 3 This board definition results in a u-boot.bin which can be chainloaded 4 from NOLO in qemu or on a real N900. It does very little hardware config 8 NOLO is expecting a kernel image and will treat any image it finds in 10 a kernel. In order to transparently boot the original kernel, it will be 14 uImage or boot.scr from a fat, ext2/ext3 or ext4 filesystem in external
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | sun8i-h3-orangepi-2.dts | 6 * licensing only applies to this file, and not this project as a 9 * a) This file is free software; you can redistribute it and/or 22 * obtaining a copy of this software and associated documentation 67 type = "a"; 175 * alias for it (which e.g. makes u-boot set a mac-address).
|
/openbmc/linux/Documentation/ABI/ |
H A D | README | 41 This directory contains a list of the old interfaces that have 49 Contact: Primary contact for this interface (may be a mailing list) 57 sure they are working in a proper way and do not need to 62 The fields should be use a simple notation, compatible with ReST markup. 63 Also, the file **should not** have a top-level index, like::
|
/openbmc/linux/Documentation/networking/devlink/ |
H A D | devlink-flash.rst | 15 Note that the file name is a path relative to the firmware loading path 22 The ``devlink-flash`` command allows optionally specifying a mask indicating 44 the driver for such a device must reject any combination which cannot be 57 disk, or automatically flash a new image from disk. The ``fw_load_policy`` 76 is fixed) - ``fixed`` versions should identify the design, not a single
|
/openbmc/openbmc/meta-openembedded/meta-oe/recipes-support/nmon/nmon/ |
H A D | 0001-Fix-a-lot-of-Werror-format-security-errors-with-mvpr.patch | 4 Subject: [PATCH] Fix a lot of -Werror=format-security errors with 7 In all these places a non-constant is used as a format string which 16 diff --git a/lmon16m.c b/lmon16m.c 18 --- a/lmon16m.c
|
/openbmc/linux/drivers/net/ethernet/chelsio/ |
H A D | Kconfig | 11 If you have a network (Ethernet) card belonging to this class, say Y. 39 To compile this driver as a module, choose M here: the module 66 To compile this driver as a module, choose M here: the module 89 To compile this driver as a module choose M here; the module 130 To compile this driver as a module choose M here; the module
|
/openbmc/linux/drivers/net/ethernet/hisilicon/ |
H A D | Kconfig | 12 If you have a network (Ethernet) card belonging to this class, say Y. 46 If you wish to compile a kernel for a hardware with hisilicon p04 SoC and 53 If you wish to compile a kernel for a hardware with hisilicon hi13x1_gamc
|
/openbmc/linux/include/linux/netfilter/ |
H A D | x_tables.h | 407 const unsigned long *a = (const unsigned long *)_a; in ifname_compare_aligned() local 412 ret = (a[0] ^ b[0]) & mask[0]; in ifname_compare_aligned() 414 ret |= (a[1] ^ b[1]) & mask[1]; in ifname_compare_aligned() 416 ret |= (a[2] ^ b[2]) & mask[2]; in ifname_compare_aligned() 418 ret |= (a[3] ^ b[3]) & mask[3]; in ifname_compare_aligned()
|
/openbmc/docs/architecture/code-update/ |
H A D | host-code-update.md | 9 1. Get a squashfs image: 12 - After building, the image should be a tarball in the output/images directory 22 - Method 3: Via TFTP: Perform a POST request to call the `DownloadViaTFTP` 31 3. Note the version id generated for that image file. The version id is a hash 66 previous step, this will write the contents of the image to a UBI volume in
|
/openbmc/openbmc/poky/documentation/dev-manual/ |
H A D | read-only-rootfs.rst | 3 Creating a Read-Only Root Filesystem 7 root filesystem's write permissions (i.e. you need a read-only root 9 from a read-only storage device. For either case, you can customize your 14 Supporting a read-only root filesystem requires that the system and 71 and checking to determine which environment is being used as a method
|
/openbmc/openbmc/meta-openembedded/meta-oe/recipes-extended/wxwidgets/ |
H A D | wxwidgets_3.2.1.bb | 2 DESCRIPTION = "wxWidgets is a free and open source cross-platform C++ framework for writing advance… 6 # WXwindows licence is a modified version of LGPL explicitly allowing not 60 bb.error("PACKAGECONFIG must select a toolkit. Add one of no_gui / gtk / qt!") 86 # ${B}/wx-config is a symlink for build and not needed after compile 88 # 1. make a file out of wx-config so that binconfig.bbclass detects it
|
/openbmc/openbmc/poky/meta/classes-recipe/ |
H A D | ptest-cargo.bbclass | 6 # I didn't find a cleaner way to share data between compile and install tasks 47 # skip lines that are not a json 64 # It will just run a test suite with 0 tests, if the project didn't define some 101 with open(ptest_script, "a") as f: 107 with open(ptest_script, "a") as f:
|