/openbmc/linux/Documentation/devicetree/bindings/phy/ |
H A D | phy-miphy365x.txt | 8 - compatible : Should be "st,miphy365x-phy" 9 - st,syscfg : Phandle / integer array property. Phandle of sysconfig group 33 - st,sata-gen : Generation of locally attached SATA IP. Expected values 36 - st,pcie-tx-pol-inv : Bool property to invert the polarity PCIe Tx (Txn/Txp) 37 - st,sata-tx-pol-inv : Bool property to invert the polarity SATA Tx (Txn/Txp) 42 compatible = "st,miphy365x-phy"; 43 st,syscfg = <&syscfg_rear 0x824 0x828>; 52 st,sata-gen = <3>; 59 st,pcie-tx-pol-inv;
|
/openbmc/linux/Documentation/devicetree/bindings/net/can/ |
H A D | st,stm32-bxcan.yaml | 4 $id: http://devicetree.org/schemas/net/can/st,stm32-bxcan.yaml# 20 - st,stm32f4-bxcan 22 st,can-primary: 32 st,can-secondary: 65 st,gcan: 78 - st,gcan 88 compatible = "st,stm32f4-bxcan"; 94 st,can-primary; 95 st,gcan = <&gcan>;
|
/openbmc/linux/drivers/gpu/drm/arm/display/komeda/ |
H A D | komeda_kms.h | 139 static inline bool is_writeback_only(struct drm_crtc_state *st) in is_writeback_only() argument 141 struct komeda_wb_connector *wb_conn = to_kcrtc(st->crtc)->wb_conn; in is_writeback_only() 144 return conn && (st->connector_mask == BIT(drm_connector_index(conn))); in is_writeback_only() 148 is_only_changed_connector(struct drm_crtc_state *st, struct drm_connector *conn) in is_only_changed_connector() argument 153 old_st = drm_atomic_get_old_crtc_state(st->state, st->crtc); in is_only_changed_connector() 154 changed_connectors = st->connector_mask ^ old_st->connector_mask; in is_only_changed_connector()
|
/openbmc/linux/arch/arm/boot/dts/st/ |
H A D | stm32mp157c-phycore-stm32mp15-som.dtsi | 116 st,eth-clk-sel; 192 st,mod-12b = <1>; 193 st,ref-sel = <0>; 194 st,adc-freq = <1>; 195 st,ave-ctrl = <1>; 197 st,settling = <2>; 198 st,fraction-z = <7>; 199 st,i-drive = <1>; 280 st,mask-reset; 492 st,neg-edge; [all …]
|
/openbmc/linux/tools/build/ |
H A D | fixdep.c | 123 struct stat st; in print_deps() local 133 if (fstat(fd, &st) < 0) { in print_deps() 138 if (st.st_size == 0) { in print_deps() 143 map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0); in print_deps() 150 parse_dep_file(map, st.st_size); in print_deps() 152 munmap(map, st.st_size); in print_deps()
|
/openbmc/u-boot/include/linux/usb/ |
H A D | musb.h | 49 #define MUSB_EP_FIFO(ep, st, m, pkt) \ argument 52 .style = st, \ 57 #define MUSB_EP_FIFO_SINGLE(ep, st, pkt) \ argument 58 MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt) 60 #define MUSB_EP_FIFO_DOUBLE(ep, st, pkt) \ argument 61 MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
|
/openbmc/openbmc/meta-google/recipes-phosphor/flash/gbmc-update/ |
H A D | 40-gbmc-upgrade.sh | 57 local st=() 60 && st=("${PIPESTATUS[@]}") || st=("${PIPESTATUS[@]}") 62 if (( st[0] == 0 )); then 65 …if (( st[1] != 0 )) && [[ -n $(grep -v '\(Exiting with failure status\|Not found in archive\|Canno…
|
/openbmc/linux/drivers/media/platform/st/sti/delta/ |
H A D | Makefile | 2 obj-$(CONFIG_VIDEO_STI_DELTA_DRIVER) += st-delta.o 3 st-delta-y := delta-v4l2.o delta-mem.o delta-ipc.o delta-debug.o 6 st-delta-$(CONFIG_VIDEO_STI_DELTA_MJPEG) += delta-mjpeg-hdr.o 7 st-delta-$(CONFIG_VIDEO_STI_DELTA_MJPEG) += delta-mjpeg-dec.o
|
/openbmc/linux/net/netfilter/ |
H A D | nf_conntrack_standalone.c | 110 for (st->bucket = 0; in ct_get_first() 111 st->bucket < st->htable_size; in ct_get_first() 114 hlist_nulls_first_rcu(&st->hash[st->bucket])); in ct_get_first() 129 if (++st->bucket >= st->htable_size) in ct_get_next() 133 hlist_nulls_first_rcu(&st->hash[st->bucket])); in ct_get_next() 156 nf_conntrack_get_ht(&st->hash, &st->htable_size); in ct_seq_start() 441 st->found, in ct_cpu_seq_show() 443 st->invalid, in ct_cpu_seq_show() 447 st->insert, in ct_cpu_seq_show() 449 st->drop, in ct_cpu_seq_show() [all …]
|
/openbmc/linux/arch/sparc/lib/ |
H A D | memcpy.S | 148 st %o4, [%o0] 196 st %g2, [%o0 - 0x08] 198 st %g3, [%o0 - 0x04] 207 st %g2, [%o0] 272 st %g2, [%o0] 367 st %g2, [%i0] 373 st %g2, [%i0 + 4] 379 st %g2, [%i0 + 8] 387 st %g2, [%i0 + 12] 398 st %g2, [%i0] [all …]
|
/openbmc/linux/arch/powerpc/include/asm/ |
H A D | floppy.h | 53 unsigned char st; in floppy_hardint() local 61 st = 1; in floppy_hardint() 64 st = inb(virtual_dma_port + FD_STATUS); in floppy_hardint() 65 st &= STATUS_DMA | STATUS_READY; in floppy_hardint() 66 if (st != (STATUS_DMA | STATUS_READY)) in floppy_hardint() 75 st = inb(virtual_dma_port + FD_STATUS); in floppy_hardint() 77 if (st == STATUS_DMA) in floppy_hardint() 79 if (!(st & STATUS_DMA)) { in floppy_hardint()
|
/openbmc/linux/Documentation/devicetree/bindings/crypto/ |
H A D | st,stm32-cryp.yaml | 4 $id: http://devicetree.org/schemas/crypto/st,stm32-cryp.yaml# 14 - Lionel Debieve <lionel.debieve@foss.st.com> 19 - st,stn8820-cryp 21 - st,stm32f756-cryp 22 - st,stm32mp1-cryp 63 compatible = "st,stm32mp1-cryp";
|
/openbmc/linux/drivers/media/platform/st/sti/ |
H A D | Kconfig | 2 source "drivers/media/platform/st/sti/bdisp/Kconfig" 3 source "drivers/media/platform/st/sti/c8sectpfe/Kconfig" 4 source "drivers/media/platform/st/sti/delta/Kconfig" 5 source "drivers/media/platform/st/sti/hva/Kconfig"
|
/openbmc/linux/Documentation/devicetree/bindings/timer/ |
H A D | st,stm32-timer.yaml | 4 $id: http://devicetree.org/schemas/timer/st,stm32-timer.yaml# 10 - Fabrice Gasnier <fabrice.gasnier@foss.st.com> 11 - Patrice Chotard <patrice.chotard@foss.st.com> 15 const: st,stm32-timer 42 compatible = "st,stm32-timer";
|
H A D | st,stih407-lpc | 8 [See: ../rtc/rtc-st-lpc.txt for RTC options] 12 - compatible : Must be: "st,stih407-lpc" 16 - st,lpc-mode : The LPC can run either one of three modes: 24 compatible = "st,stih407-lpc"; 27 st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
|
/openbmc/linux/Documentation/devicetree/bindings/thermal/ |
H A D | spear-thermal.txt | 4 - compatible : "st,thermal-spear1340" 6 - st,thermal-flags: flags used to enable thermal sensor 11 compatible = "st,thermal-spear1340"; 13 st,thermal-flags = <0x7000>;
|
/openbmc/linux/drivers/media/dvb-frontends/ |
H A D | dib7000p.c | 530 dib7000p_write_word(st, 1029, st->gpio_dir); in dib7000p_reset_gpio() 531 dib7000p_write_word(st, 1030, st->gpio_val); in dib7000p_reset_gpio() 535 dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos); in dib7000p_reset_gpio() 537 dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div); in dib7000p_reset_gpio() 543 st->gpio_dir = dib7000p_read_word(st, 1029); in dib7000p_cfg_gpio() 546 dib7000p_write_word(st, 1029, st->gpio_dir); in dib7000p_cfg_gpio() 548 st->gpio_val = dib7000p_read_word(st, 1030); in dib7000p_cfg_gpio() 551 dib7000p_write_word(st, 1030, st->gpio_val); in dib7000p_cfg_gpio() 2767 st->version = dib7000p_read_word(st, 897); in dib7000p_init() 2774 dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); in dib7000p_init() [all …]
|
/openbmc/linux/arch/csky/abiv2/ |
H A D | strcpy.S | 88 st.b t0, (a3) 91 st.b t0, (a3, 1) 94 st.b t0, (a3, 2) 99 st.b t0, (a3) 102 st.b t0, (a3, 1) 105 st.b t0, (a3, 2) 116 st.b a2, (a3)
|
/openbmc/linux/lib/ |
H A D | textsearch.c | 208 struct ts_linear_state *st = (struct ts_linear_state *) state->cb; in get_linear_data() local 210 if (likely(consumed < st->len)) { in get_linear_data() 211 *dst = st->data + consumed; in get_linear_data() 212 return st->len - consumed; in get_linear_data() 235 struct ts_linear_state *st = (struct ts_linear_state *) state->cb; in textsearch_find_continuous() local 238 st->data = data; in textsearch_find_continuous() 239 st->len = len; in textsearch_find_continuous()
|
/openbmc/linux/arch/m68k/include/asm/ |
H A D | sun3xflop.h | 116 register unsigned char st; in sun3xflop_hardint() local 145 st = *(sun3x_fdc.status_r); in sun3xflop_hardint() 149 if((st & 0x80) == 0) { in sun3xflop_hardint() 155 if((st & 0x20) == 0) in sun3xflop_hardint() 169 st = *(sun3x_fdc.status_r); in sun3xflop_hardint() 176 if(st == 0x20) in sun3xflop_hardint() 178 if(!(st & 0x20)) { in sun3xflop_hardint()
|
/openbmc/linux/Documentation/devicetree/bindings/arm/stm32/ |
H A D | st,mlahb.yaml | 4 $id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml# 10 - Fabien Dessenne <fabien.dessenne@foss.st.com> 11 - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> 19 [1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf 20 [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping 29 - st,mlahb 58 compatible = "st,mlahb", "simple-bus";
|
/openbmc/linux/arch/x86/kernel/ |
H A D | dumpstack_64.c | 71 #define EPAGERANGE(st) \ argument 72 [PFN_DOWN(CEA_ESTACK_OFFS(st)) ... \ 73 PFN_DOWN(CEA_ESTACK_OFFS(st) + CEA_ESTACK_SIZE(st) - 1)] = { \ 74 .offs = CEA_ESTACK_OFFS(st), \ 75 .size = CEA_ESTACK_SIZE(st), \ 76 .type = STACK_TYPE_EXCEPTION + ESTACK_ ##st, }
|
/openbmc/linux/drivers/macintosh/ |
H A D | windfarm_pm121.c | 584 struct pm121_sys_state *st; in pm121_sys_fans_tick() local 591 st = pm121_sys_state[loop_id]; in pm121_sys_fans_tick() 595 if (--st->ticks != 0) { in pm121_sys_fans_tick() 600 st->ticks = PM121_SYS_INTERVAL; in pm121_sys_fans_tick() 619 st->pid.param.min); in pm121_sys_fans_tick() 625 st->setpoint = new_setpoint; in pm121_sys_fans_tick() 725 if (--st->ticks != 0) { in pm121_cpu_fans_tick() 730 st->ticks = PM121_CPU_INTERVAL; in pm121_cpu_fans_tick() 753 if (temp > st->pid.param.tmax) in pm121_cpu_fans_tick() 761 st->pid.param.min); in pm121_cpu_fans_tick() [all …]
|
/openbmc/linux/arch/loongarch/include/asm/ |
H A D | asm.h | 56 #define REG_S st.w 61 #define REG_S st.d 74 #define INT_S st.w 88 #define INT_S st.d 105 #define LONG_S st.w 126 #define LONG_S st.d 150 #define PTR_S st.w 173 #define PTR_S st.d
|
/openbmc/linux/Documentation/devicetree/bindings/rtc/ |
H A D | rtc-st-lpc.txt | 8 [See: ../timer/st,stih407-lpc for Clocksource options] 12 - compatible : Must be: "st,stih407-lpc" 16 - st,lpc-mode : The LPC can run either one of three modes: 24 compatible = "st,stih407-lpc"; 27 st,lpc-mode = <ST_LPC_MODE_RTC>;
|