/openbmc/linux/Documentation/devicetree/bindings/iio/adc/ |
H A D | adi,ad7606.yaml | 43 This logic input is used to initiate conversions on the analog 75 this pin is tied to a logic high, the analog input range is ±10V for 76 all channels. If this pin is tied to a logic low, the analog input range
|
H A D | st,stm32-dfsdm-adc.yaml | 122 - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 123 - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
|
/openbmc/linux/Documentation/devicetree/bindings/usb/ |
H A D | nvidia,tegra124-xusb.yaml | 76 - description: reset for the SuperSpeed logic 109 description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. 112 description: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
|
/openbmc/webui-vue/docs/guide/unit-testing/ |
H A D | readme.md | 142 functions that may not require testing unless there is getter logic. Any logic 148 functions that may not require testing unless there is mutation logic. Any logic 180 - If there is logic used for creating `RouteLink` items, we should unit test
|
/openbmc/u-boot/doc/device-tree-bindings/power/ |
H A D | tps65090.txt | 8 while the default logic is to stop charging.
|
/openbmc/openbmc/meta-ibm/recipes-phosphor/dbus/fan-policy/witherspoon/ |
H A D | fan-errors.yaml | 122 'Trigger logic on chassis power state changes.' 131 'Trigger logic on fan0 presence state changes.' 140 'Trigger logic on fan0 functional state changes.' 149 'Trigger logic on fan1 presence state changes.' 158 'Trigger logic on fan1 functional state changes.' 167 'Trigger logic on fan2 presence state changes.' 176 'Trigger logic on fan2 functional state changes.' 185 'Trigger logic on fan3 presence state changes.' 194 'Trigger logic on fan3 functional state changes.'
|
/openbmc/linux/Documentation/devicetree/bindings/net/can/ |
H A D | st,stm32-bxcan.yaml | 26 some of the required logic. 36 share some of the required logic.
|
/openbmc/openbmc/meta-openembedded/meta-python/recipes-devtools/python/ |
H A D | python3-meld3_2.0.1.bb | 4 template markup and dynamic rendering logic separate from one \
|
H A D | python3-async-timeout_4.0.3.bb | 4 timeout logic around block of code or in cases when asyncio.wait_for() \
|
/openbmc/linux/Documentation/devicetree/bindings/hwmon/ |
H A D | adt7475.yaml | 45 the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm 46 uses a logic high output for 100% duty cycle.
|
/openbmc/linux/drivers/dma/dw-edma/ |
H A D | Kconfig | 18 Provides a glue-logic between the Synopsys DesignWare
|
/openbmc/linux/drivers/nfc/st21nfca/ |
H A D | Kconfig | 7 HCI logic and hooks into the NFC kernel APIs. Physical layers will
|
/openbmc/linux/Documentation/devicetree/bindings/power/supply/ |
H A D | tps65090-charger.yaml | 22 Enables charging when a low current is detected while the default logic is to stop charging.
|
/openbmc/linux/Documentation/driver-api/gpio/ |
H A D | intro.rst | 39 several dozen of them. Programmable logic devices (like FPGAs) can easily 56 input de-glitch/debounce logic, sometimes with software controls. 99 logic (low=true) perspective this is a "wire-OR". 115 The same logic can be applied to emulate open source signaling, by driving the
|
/openbmc/linux/Documentation/ABI/testing/ |
H A D | sysfs-devices-system-xen_cpu | 20 logic restrictions and assumptions.
|
/openbmc/linux/Documentation/devicetree/bindings/ata/ |
H A D | ahci-platform.yaml | 110 - description: reset line for the glue logic 126 - description: reset for the glue logic
|
/openbmc/u-boot/doc/device-tree-bindings/clock/ |
H A D | rockchip,rk3288-dmc.txt | 18 -logic-supply: this driver should adjust VDD_LOGIC according to dmc frequency, so need get logic-su… 133 logic-supply = <&vdd_logic>;
|
/openbmc/linux/Documentation/networking/device_drivers/ethernet/altera/ |
H A D | altera_tse.rst | 39 developer wishes to support their own soft DMA logic and driver support. Any 85 interrupt is driven by the transmit DMA logic. The driver handles the transmit 91 The driver will post receive buffers to the receive DMA logic during driver 93 underlying DMA logic (MSGDMA is able queue receive buffers, SGDMA is not able 94 to queue receive buffers to the SGDMA receive logic). When a packet is 95 received, the DMA logic generates an interrupt. The driver handles a receive 96 interrupt by obtaining the DMA receive logic status, reaping receive
|
/openbmc/linux/Documentation/devicetree/bindings/pwm/ |
H A D | nxp,pca9685-pwm.txt | 12 - invert (bool): boolean to enable inverted logic
|
/openbmc/linux/Documentation/devicetree/bindings/soc/xilinx/ |
H A D | xlnx,vcu.txt | 8 and programmable logic. Also provides the list of register set to configure
|
/openbmc/linux/Documentation/devicetree/bindings/clock/ |
H A D | marvell,pxa168.txt | 12 region. There are 3 places in SOC has clock control logic:
|
H A D | marvell,pxa910.txt | 12 region. There are 4 places in SOC has clock control logic:
|
/openbmc/openbmc/meta-openembedded/meta-perl/recipes-perl/libextutils/ |
H A D | libextutils-installpaths-perl_0.012.bb | 1 SUMMARY = "ExtUtils::InstallPaths - Build.PL install path logic made easy"
|
/openbmc/openbmc-tools/bi2cp/ |
H A D | README.md | 3 `bi2cp` parses CSV dumps from the Beagle logic analyzer to lift the raw I2C
|
/openbmc/linux/Documentation/devicetree/bindings/iio/proximity/ |
H A D | google,cros-ec-mkbp-proximity.yaml | 15 This is implemented on the EC as near/far logic and exposed to the OS
|