/openbmc/linux/arch/m68k/kernel/ |
H A D | head.S | 2758 .byte 3,0xc0 /* receiver: 8 bpc */ 2760 .byte 10,0 /* NRZ */ 2762 .byte 12,1,13,0 /* 38400 baud */ 2764 .byte 3,0xc1 /* enable receiver */ 2765 .byte 5,0xea /* enable transmitter */ 2766 .byte -1 2782 .byte 3,0xc0 /* receiver: 8 bpc */ 2784 .byte 10,0 /* NRZ */ 2786 .byte 12,24,13,0 /* 9600 baud */ 2788 .byte 3,0xc1 /* enable receiver */ [all …]
|
/openbmc/u-boot/doc/imx/common/ |
H A D | imx27.txt | 10 reversed MAC byte order (i.e. LSB first).
|
H A D | imx25.txt | 10 natural MAC byte order (i.e. MSB first).
|
/openbmc/linux/drivers/media/usb/gspca/ |
H A D | spca1528.c | 108 u8 byte) in reg_wb() argument 116 req, value, index, byte); in reg_wb() 117 gspca_dev->usb_buf[0] = byte; in reg_wb()
|
/openbmc/linux/Documentation/misc-devices/ |
H A D | eeprom.rst | 80 does not respond to byte reads. If this register is present, the lower 128 81 bytes of the memory array are not write protected. Any byte data write to 94 These devices require two-byte address fields and are not supported.
|
/openbmc/linux/Documentation/driver-api/iio/ |
H A D | buffers.rst | 57 |D3 |D2 |D1 |D0 | X | X | X | X | (LOW byte, address 0x06) 62 |D11|D10|D9 |D8 |D7 |D6 |D5 |D4 | (HIGH byte, address 0x07) 71 two byte little endian signed data, that needs a 4 bits right shift before
|
/openbmc/linux/drivers/i2c/busses/ |
H A D | i2c-ali1535.c | 386 outb_p(data->byte, SMBHSTDAT0); in ali1535_access() 439 data->byte = inb_p(SMBHSTDAT0); in ali1535_access() 442 data->byte = inb_p(SMBHSTDAT0); in ali1535_access()
|
H A D | i2c-ali15x3.c | 373 outb_p(data->byte, SMBHSTDAT0); in ali15x3_access() 425 data->byte = inb_p(SMBHSTDAT0); in ali15x3_access() 428 data->byte = inb_p(SMBHSTDAT0); in ali15x3_access()
|
/openbmc/linux/drivers/net/can/cc770/ |
H A D | cc770_isa.c | 93 module_param_array(cir, byte, NULL, 0444); 96 module_param_array(cor, byte, NULL, 0444); 99 module_param_array(bcr, byte, NULL, 0444);
|
/openbmc/qemu/target/s390x/tcg/ |
H A D | mem_helper.c | 229 memset(haddr, byte, size); in do_access_memset() 232 memset(haddr, byte, size); in do_access_memset() 236 cpu_stb_mmu(env, vaddr + i, byte, oi, ra); in do_access_memset() 243 uint8_t byte, uintptr_t ra) in access_memset() argument 288 stb_p(haddr + offset, byte); in access_set_byte() 315 access_set_byte(env, desta, i, byte, ra); in access_memmove() 496 access_set_byte(env, &desta, i, byte, ra); in do_helper_mvc() 525 access_set_byte(env, &desta, i, byte, ra); in HELPER() 1625 uint8_t byte, new_byte; in HELPER() local 1627 byte = cpu_ldub_data_ra(env, array + i, ra); in HELPER() [all …]
|
/openbmc/qemu/tests/tcg/s390x/ |
H A D | exrl-ssm-early.S | 36 .byte 0x08 /* bit 4 set */
|
/openbmc/openbmc/meta-arm/meta-arm-bsp/recipes-security/trusted-services/corstone1000/ts-newlib/ |
H A D | 0001-newlib-memcpy-remove-optimized-version.patch | 128 - byte 3 times if count==1, or the 2nd byte twice if count==2. */ 157 - /* Align DST to 16 byte alignment so that we don't cross cache line 190 - there is just 1 byte left. */
|
/openbmc/qemu/tests/qemu-iotests/ |
H A D | 257 | 34 def __init__(self, byte, offset, size=GRANULARITY): argument 35 self.byte = byte 226 pattern.byte,
|
/openbmc/u-boot/arch/x86/cpu/ |
H A D | call32.S | 35 .byte 0x48 /* REX prefix to force 64-bit far return */
|
/openbmc/qemu/tests/tcg/cris/bare/ |
H A D | check_movscr.s | 4 ; Move constant byte, word, dword to register. Check that sign-extension
|
/openbmc/linux/drivers/scsi/aic7xxx/ |
H A D | aic79xx.reg | 1329 * Scb offset for the byte field specifying the attribute byte 1343 * byte to be used in command packets. 1367 * Scb offset for the 2 byte "next scb link". 1514 * The byte to be sent for the reserved byte 0 of 1682 * Packet byte counter. 2896 * Transfers must be 8byte aligned and sized. 3458 * most significant instrution byte (the byte with the parity bit) is written. 3469 * Low byte must be written prior to high byte. 3604 * low byte followed by high byte. There are 8 stack locations. 3693 * Track whether the transfer byte count for [all …]
|
/openbmc/u-boot/drivers/spi/ |
H A D | ich.c | 465 int byte; in ich_spi_xfer() local 467 byte = ich_readb(ctlr, ctlr->speed); in ich_spi_xfer() 469 byte |= SSFC_SCF_33MHZ; in ich_spi_xfer() 471 byte &= ~SSFC_SCF_33MHZ; in ich_spi_xfer() 472 ich_writeb(ctlr, byte, ctlr->speed); in ich_spi_xfer()
|
/openbmc/qemu/docs/interop/ |
H A D | qed_spec.txt | 43 * ''l1_table_offset'' is the offset of the first byte of the L1 table in the image file and must be… 45 * ''backing_filename_offset'' and ''backing_filename_size'' describe a string in (byte offset, byte… 114 | L1 index | L2 index | byte offset | 119 offset_mask = ~(cluster_size - 1) # mask for the image file byte offset
|
/openbmc/linux/lib/xz/ |
H A D | xz_dec_stream.c | 178 uint8_t byte; in dec_vli() local 184 byte = in[*in_pos]; in dec_vli() 187 s->vli |= (vli_type)(byte & 0x7F) << s->pos; in dec_vli() 189 if ((byte & 0x80) == 0) { in dec_vli() 191 if (byte == 0 && s->pos != 0) in dec_vli()
|
/openbmc/linux/drivers/rtc/ |
H A D | rtc-sh.c | 379 unsigned int byte; in sh_rtc_read_alarm_value() local 382 byte = readb(rtc->regbase + reg_off); in sh_rtc_read_alarm_value() 383 if (byte & AR_ENB) { in sh_rtc_read_alarm_value() 384 byte &= ~AR_ENB; /* strip the enable bit */ in sh_rtc_read_alarm_value() 385 value = bcd2bin(byte); in sh_rtc_read_alarm_value()
|
/openbmc/qemu/hw/input/ |
H A D | virtio-input-hid.c | 60 int i, bit, byte, bmax = 0; in virtio_input_extend_config() local 68 byte = bit / 8; in virtio_input_extend_config() 70 ext.u.bitmap[byte] |= (1 << bit); in virtio_input_extend_config() 71 if (bmax < byte+1) { in virtio_input_extend_config() 72 bmax = byte+1; in virtio_input_extend_config()
|
/openbmc/linux/drivers/net/ethernet/marvell/mvpp2/ |
H A D | mvpp2_debugfs.c | 246 unsigned char byte[2], enable[2]; in mvpp2_dbgfs_port_vid_show() local 265 mvpp2_prs_tcam_data_byte_get(&pe, 2, &byte[0], &enable[0]); in mvpp2_dbgfs_port_vid_show() 266 mvpp2_prs_tcam_data_byte_get(&pe, 3, &byte[1], &enable[1]); in mvpp2_dbgfs_port_vid_show() 268 rvid = ((byte[0] & 0xf) << 8) + byte[1]; in mvpp2_dbgfs_port_vid_show()
|
/openbmc/linux/drivers/auxdisplay/ |
H A D | ht16k33.c | 293 uint8_t byte; in ht16k33_initialize() local 303 byte = REG_SYSTEM_SETUP_OSC_ON | REG_SYSTEM_SETUP; in ht16k33_initialize() 304 err = i2c_smbus_write_byte(priv->client, byte); in ht16k33_initialize() 309 byte = REG_ROWINT_SET | REG_ROWINT_SET_INT_ACT_HIGH; in ht16k33_initialize() 311 byte |= REG_ROWINT_SET_INT_EN; in ht16k33_initialize() 312 return i2c_smbus_write_byte(priv->client, byte); in ht16k33_initialize()
|
/openbmc/linux/arch/x86/crypto/ |
H A D | aegis128-aesni-asm.S | 31 .byte 0x00, 0x01, 0x01, 0x02, 0x03, 0x05, 0x08, 0x0d 32 .byte 0x15, 0x22, 0x37, 0x59, 0x90, 0xe9, 0x79, 0x62 34 .byte 0xdb, 0x3d, 0x18, 0x55, 0x6d, 0xc2, 0x2f, 0xf1 35 .byte 0x20, 0x11, 0x31, 0x42, 0x73, 0xb5, 0x28, 0xdd 40 .byte 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 41 .byte 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
|
/openbmc/linux/drivers/net/ethernet/amd/ |
H A D | nmclan_cs.c | 1323 int i, byte; /* temporary array indices */ in BuildLAF() local 1328 for (byte = 0; byte < 6; byte++) in BuildLAF() 1330 updateCRC(CRC, (adr[byte] >> i) & 1); in BuildLAF() 1336 byte = hashcode >> 3; in BuildLAF() 1337 ladrf[byte] |= (1 << (hashcode & 7)); in BuildLAF()
|