Searched refs:SD (Results 201 – 225 of 554) sorted by relevance
12345678910>>...23
20 - Secure Digital card connected to OMAP MMC/SD host
37 Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
10 This works as an external DMA engine for SD/eMMC controllers etc.
86 /* SD */
111 /* Colibri SD/MMC Card */
71 SD card needs a while to get ready before Linux is able to boot from it.79 The Raspberry Pi 4 board can load the boot image files from SD card and USB memory.80 By default SD card media is used as boot media.82 To switch the boot media from SD card to USB memory, the following variables are supported84 The default value of `CMDLINE_ROOT_PARTITION` is "/dev/mmcblk0p2" to mount SD card. If you want to …85 `BOOT_MEDIA` allows `mmc` and `usb`. The "mmc" is required to load an image from the SD card, foll…201 ## Including additional files in the SD card image boot partition203 The SD card image class supports adding extra files into the boot
11 * SD/MMC: support SD 3.0, MMC 4.51
82 code. If not (no SD card at all or invalid magic), it will:114 (replace /dev/sdx with you SD card device file name, which could be129 Create the SPL and FIT image like described above for the SD card.141 Now boot the board without an SD card inserted and you should see the157 SD card or an image file:
77 /* Used by SD Card */
78 /* Used by SD Card */
82 /* Used by SD Card */
84 /* Used by SD Card */
26 mmc1 = &sdhc_2; /* SDC2 SD card slot */
56 ldo16: ldo16 { /* SD */
72 SW8[7] = 0 - The on-board SD/MMC slot is active73 SW8[7] = 1 - The externel SD/MMC slot is active
9 with 2 Freescale i.MX6Q sabre SD boards.35 1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded
154 // External Micro SD slot266 regulator-name = "V-MMC-SD";
4 # Create an image that can be written onto a SD card using dd.62 # SD card image name68 # SD card vfat partition image name
172 select SD180 select SD405 select SD417 select SD
7 a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
7 title: MMC/SD/SDIO slot directly connected to a SPI bus
56 label = "uc8100me:SD";