| /openbmc/linux/drivers/gpu/drm/i915/display/ |
| H A D | intel_dpll_mgr.h | eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
|
| H A D | intel_display_power.h | eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
|
| H A D | intel_dpll_mgr.c | eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
|
| H A D | intel_display_power.c | eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
|
| H A D | intel_display.c | eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
eef037ea Wed Jul 03 18:03:53 CDT 2019 Vivek Kasireddy <vivek.kasireddy@intel.com> drm/i915/ehl: Add support for DPLL4 (v10)
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
|