| /openbmc/phosphor-ipmi-flash/subprojects/ |
| H A D | googletest.wrap | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| H A D | stdplus.wrap | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| H A D | phosphor-dbus-interfaces.wrap | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| H A D | sdbusplus.wrap | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| H A D | phosphor-ipmi-blobs.wrap | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| H A D | pciaccess.wrap | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/cleanup/test/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/tools/test/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/bmc/version-handler/test/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/bmc/version-handler/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/cleanup/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/bmc/firmware-handler/test/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/bmc/test/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/bmc/firmware-handler/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/bmc/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/tools/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| /openbmc/phosphor-ipmi-flash/ |
| H A D | meson.build | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|
| H A D | .gitignore | bcae9002 Sun Sep 12 15:58:04 CDT 2021 Willy Tu <wltu@google.com> build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
|