/openbmc/linux/drivers/net/wireless/intel/iwlwifi/ |
H A D | Makefile | 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management
In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command
Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
H A D | iwl-trans.h | 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management
In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command
Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
/openbmc/linux/drivers/net/wireless/intel/iwlwifi/pcie/ |
H A D | tx-gen2.c | 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management
In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command
Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
H A D | internal.h | 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management
In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command
Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
H A D | tx.c | 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management
In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command
Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
H A D | trans.c | 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management
In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command
Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> 6b35ff91 Thu Sep 29 06:36:19 CDT 2016 Sara Sharon <sara.sharon@intel.com> iwlwifi: pcie: introduce a000 TX queues management In a000 devices the TX handling is different in a few ways: * Queues are allocated dynamically * DQA is enabled by default * Driver shouldn't access TFH registers - ucode configures it all in SCD_QUEUE_CFG command Support all this in a new API with op mode, where op mode sends the command, transport will allocate the queue dynamically, fill in DMA properties, send the command to FW and get the ID back. Current implementation only sets the new transport API and fills the DMA properties. Future patches will complete the other parts. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|