/openbmc/linux/arch/x86/um/ |
H A D | Kconfig | 2a86f6612164a10a3cdb6a499bddf329c4d69f84 Thu Feb 27 21:46:40 CST 2020 Masahiro Yamada <masahiroy@kernel.org> kbuild: use KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST
Most of the Kconfig commands (except defconfig and all*config) read the .config file as a base set of CONFIG options.
When it does not exist, the files in DEFCONFIG_LIST are searched in this order and loaded if found.
I do not see much sense in the last two lines in DEFCONFIG_LIST.
[1] ARCH_DEFCONFIG
The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.
arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or 64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG should be a fixed string because the base config file is loaded before the symbol evaluation stage.
Using KBUILD_DEFCONFIG makes more sense because it is fixed before Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".
[2] arch/$(ARCH)/defconfig
This file path is no longer valid. The defconfig files are always located in the arch configs/ directories.
$ find arch -name defconfig | sort arch/alpha/configs/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/configs/defconfig arch/unicore32/configs/defconfig
The path arch/*/configs/defconfig is already covered by "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is not necessary.
I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise, the 7 architectures listed above would end up with endless loop of syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
/openbmc/linux/scripts/kconfig/ |
H A D | Makefile | 2a86f6612164a10a3cdb6a499bddf329c4d69f84 Thu Feb 27 21:46:40 CST 2020 Masahiro Yamada <masahiroy@kernel.org> kbuild: use KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST
Most of the Kconfig commands (except defconfig and all*config) read the .config file as a base set of CONFIG options.
When it does not exist, the files in DEFCONFIG_LIST are searched in this order and loaded if found.
I do not see much sense in the last two lines in DEFCONFIG_LIST.
[1] ARCH_DEFCONFIG
The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.
arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or 64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG should be a fixed string because the base config file is loaded before the symbol evaluation stage.
Using KBUILD_DEFCONFIG makes more sense because it is fixed before Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".
[2] arch/$(ARCH)/defconfig
This file path is no longer valid. The defconfig files are always located in the arch configs/ directories.
$ find arch -name defconfig | sort arch/alpha/configs/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/configs/defconfig arch/unicore32/configs/defconfig
The path arch/*/configs/defconfig is already covered by "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is not necessary.
I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise, the 7 architectures listed above would end up with endless loop of syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
/openbmc/linux/arch/sparc/ |
H A D | Kconfig | 2a86f6612164a10a3cdb6a499bddf329c4d69f84 Thu Feb 27 21:46:40 CST 2020 Masahiro Yamada <masahiroy@kernel.org> kbuild: use KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST
Most of the Kconfig commands (except defconfig and all*config) read the .config file as a base set of CONFIG options.
When it does not exist, the files in DEFCONFIG_LIST are searched in this order and loaded if found.
I do not see much sense in the last two lines in DEFCONFIG_LIST.
[1] ARCH_DEFCONFIG
The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.
arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or 64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG should be a fixed string because the base config file is loaded before the symbol evaluation stage.
Using KBUILD_DEFCONFIG makes more sense because it is fixed before Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".
[2] arch/$(ARCH)/defconfig
This file path is no longer valid. The defconfig files are always located in the arch configs/ directories.
$ find arch -name defconfig | sort arch/alpha/configs/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/configs/defconfig arch/unicore32/configs/defconfig
The path arch/*/configs/defconfig is already covered by "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is not necessary.
I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise, the 7 architectures listed above would end up with endless loop of syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
/openbmc/linux/arch/sh/ |
H A D | Kconfig | 2a86f6612164a10a3cdb6a499bddf329c4d69f84 Thu Feb 27 21:46:40 CST 2020 Masahiro Yamada <masahiroy@kernel.org> kbuild: use KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST
Most of the Kconfig commands (except defconfig and all*config) read the .config file as a base set of CONFIG options.
When it does not exist, the files in DEFCONFIG_LIST are searched in this order and loaded if found.
I do not see much sense in the last two lines in DEFCONFIG_LIST.
[1] ARCH_DEFCONFIG
The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.
arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or 64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG should be a fixed string because the base config file is loaded before the symbol evaluation stage.
Using KBUILD_DEFCONFIG makes more sense because it is fixed before Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".
[2] arch/$(ARCH)/defconfig
This file path is no longer valid. The defconfig files are always located in the arch configs/ directories.
$ find arch -name defconfig | sort arch/alpha/configs/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/configs/defconfig arch/unicore32/configs/defconfig
The path arch/*/configs/defconfig is already covered by "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is not necessary.
I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise, the 7 architectures listed above would end up with endless loop of syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
/openbmc/linux/init/ |
H A D | Kconfig | 2a86f6612164a10a3cdb6a499bddf329c4d69f84 Thu Feb 27 21:46:40 CST 2020 Masahiro Yamada <masahiroy@kernel.org> kbuild: use KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST
Most of the Kconfig commands (except defconfig and all*config) read the .config file as a base set of CONFIG options.
When it does not exist, the files in DEFCONFIG_LIST are searched in this order and loaded if found.
I do not see much sense in the last two lines in DEFCONFIG_LIST.
[1] ARCH_DEFCONFIG
The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.
arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or 64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG should be a fixed string because the base config file is loaded before the symbol evaluation stage.
Using KBUILD_DEFCONFIG makes more sense because it is fixed before Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".
[2] arch/$(ARCH)/defconfig
This file path is no longer valid. The defconfig files are always located in the arch configs/ directories.
$ find arch -name defconfig | sort arch/alpha/configs/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/configs/defconfig arch/unicore32/configs/defconfig
The path arch/*/configs/defconfig is already covered by "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is not necessary.
I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise, the 7 architectures listed above would end up with endless loop of syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
/openbmc/linux/arch/x86/ |
H A D | Kconfig | 2a86f6612164a10a3cdb6a499bddf329c4d69f84 Thu Feb 27 21:46:40 CST 2020 Masahiro Yamada <masahiroy@kernel.org> kbuild: use KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST
Most of the Kconfig commands (except defconfig and all*config) read the .config file as a base set of CONFIG options.
When it does not exist, the files in DEFCONFIG_LIST are searched in this order and loaded if found.
I do not see much sense in the last two lines in DEFCONFIG_LIST.
[1] ARCH_DEFCONFIG
The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.
arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or 64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG should be a fixed string because the base config file is loaded before the symbol evaluation stage.
Using KBUILD_DEFCONFIG makes more sense because it is fixed before Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".
[2] arch/$(ARCH)/defconfig
This file path is no longer valid. The defconfig files are always located in the arch configs/ directories.
$ find arch -name defconfig | sort arch/alpha/configs/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/configs/defconfig arch/unicore32/configs/defconfig
The path arch/*/configs/defconfig is already covered by "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is not necessary.
I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise, the 7 architectures listed above would end up with endless loop of syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
/openbmc/linux/ |
H A D | Makefile | 2a86f6612164a10a3cdb6a499bddf329c4d69f84 Thu Feb 27 21:46:40 CST 2020 Masahiro Yamada <masahiroy@kernel.org> kbuild: use KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST
Most of the Kconfig commands (except defconfig and all*config) read the .config file as a base set of CONFIG options.
When it does not exist, the files in DEFCONFIG_LIST are searched in this order and loaded if found.
I do not see much sense in the last two lines in DEFCONFIG_LIST.
[1] ARCH_DEFCONFIG
The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.
arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or 64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG should be a fixed string because the base config file is loaded before the symbol evaluation stage.
Using KBUILD_DEFCONFIG makes more sense because it is fixed before Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".
[2] arch/$(ARCH)/defconfig
This file path is no longer valid. The defconfig files are always located in the arch configs/ directories.
$ find arch -name defconfig | sort arch/alpha/configs/defconfig arch/arm64/configs/defconfig arch/csky/configs/defconfig arch/nds32/configs/defconfig arch/riscv/configs/defconfig arch/s390/configs/defconfig arch/unicore32/configs/defconfig
The path arch/*/configs/defconfig is already covered by "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is not necessary.
I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise, the 7 architectures listed above would end up with endless loop of syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|