Home
last modified time | relevance | path

Searched +full:usb2 +full:- +full:phy0 (Results 1 – 25 of 58) sorted by relevance

123

/openbmc/linux/Documentation/devicetree/bindings/usb/
H A Damlogic,meson-g12a-usb-ctrl.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/usb/amlogic,meson-g12a-usb-ctrl.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Neil Armstrong <neil.armstrong@linaro.org>
14 The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
15 in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode
18 A glue connects the DWC3 core to USB2 PHYs and optionally to an USB3 PHY.
20 One of the USB2 PHYs can be re-routed in peripheral mode to a DWC2 USB IP.
25 The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
[all …]
/openbmc/linux/arch/powerpc/boot/dts/fsl/
H A Dp1020utm-pc.dtsi2 * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
64 /* 512KB for u-boot Bootloader Image */
65 /* 512KB for u-boot Environment Variables */
67 label = "NOR U-Boot Image";
68 read-only;
[all …]
H A Dp1020mbg-pc.dtsi2 * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
66 label = "NOR Vitesse-7385 Firmware";
67 read-only;
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
[all …]
H A Dp1020rdb-pc.dtsi2 * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR Vitesse-7385 Firmware";
49 read-only;
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
[all …]
H A Dp1025rdb.dtsi2 * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR Vitesse-7385 Firmware";
49 read-only;
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
[all …]
H A Dp1020rdb.dtsi2 * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
4 * Copyright 2011-2012 Freescale Semiconductor Inc.
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR (RO) Vitesse-7385 Firmware";
49 read-only;
56 read-only;
[all …]
/openbmc/linux/arch/arm64/boot/dts/amlogic/
H A Dmeson-g12b-s922x-khadas-vim3.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b-s922x.dtsi"
11 #include "meson-khadas-vim3.dtsi"
12 #include "meson-g12b-khadas-vim3.dtsi"
19 * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
39 phy-names = "usb2-phy0", "usb2-phy1";
H A Dmeson-g12b-a311d-khadas-vim3.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b-a311d.dtsi"
11 #include "meson-khadas-vim3.dtsi"
12 #include "meson-g12b-khadas-vim3.dtsi"
19 * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
39 phy-names = "usb2-phy0", "usb2-phy1";
H A Dmeson-sm1-odroid-hc4.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-sm1-odroid.dtsi"
11 compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
12 model = "Hardkernel ODROID-HC4";
19 fan0: pwm-fan {
20 compatible = "pwm-fan";
21 #cooling-cells = <2>;
22 cooling-levels = <0 120 170 220>;
27 compatible = "gpio-leds";
[all …]
H A Dmeson-sm1-khadas-vim3l.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "meson-sm1.dtsi"
10 #include "meson-khadas-vim3.dtsi"
11 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
17 vddcpu: regulator-vddcpu {
21 compatible = "pwm-regulator";
23 regulator-name = "VDDCPU";
24 regulator-min-microvolt = <690000>;
25 regulator-max-microvolt = <1050000>;
[all …]
H A Dmeson-gxm.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 #include "meson-gxl.dtsi"
10 compatible = "amlogic,meson-gxm";
13 cpu-map {
46 capacity-dmips-mhz = <1024>;
50 capacity-dmips-mhz = <1024>;
54 capacity-dmips-mhz = <1024>;
58 capacity-dmips-mhz = <1024>;
63 compatible = "arm,cortex-a53";
65 enable-method = "psci";
[all …]
/openbmc/linux/drivers/usb/dwc3/
H A Ddwc3-meson-g12a.c1 // SPDX-License-Identifier: GPL-2.0
11 * - Control registers for each USB2 Ports
12 * - Control registers for the USB PHY layer
13 * - SuperSpeed PHY can be enabled only if port is used
14 * - Dynamic OTG switching with ID change interrupt
33 /* USB2 Ports Control Registers, offsets are per-port */
120 "usb2-phy0", "usb2-phy1", "usb2-phy2",
124 "usb2-phy0", "usb2-phy1", "usb3-phy0",
133 * correctly when only the "usb2-phy1" phy is specified on-par with the
137 "usb2-phy0", "usb2-phy1"
[all …]
/openbmc/linux/arch/arm/boot/dts/marvell/
H A Darmada-375-db.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 * (DB-88F6720)
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
12 /dts-v1/;
13 #include <dt-bindings/gpio/gpio.h>
14 #include "armada-375.dtsi"
18 compatible = "marvell,a375-db", "marvell,armada375";
21 stdout-path = "serial0:115200n8";
57 pinctrl-0 = <&spi0_pins>;
[all …]
/openbmc/linux/arch/arm/boot/dts/st/
H A Dstm32h743i-eval.dts2 * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
4 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
45 #include "stm32h7-pinctrl.dtsi"
48 model = "STMicroelectronics STM32H743i-EVAL board";
49 compatible = "st,stm32h743i-eval", "st,stm32h743";
53 stdout-path = "serial0:115200n8";
65 vdda: regulator-vdda {
66 compatible = "regulator-fixed";
67 regulator-name = "vdda";
[all …]
H A Dstm32mp15xx-dhcor-testbench.dtsi1 // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
17 stdout-path = "serial0:115200n8";
20 sd_switch: regulator-sd_switch {
21 compatible = "regulator-gpio";
22 regulator-name = "sd_switch";
23 regulator-min-microvolt = <1800000>;
24 regulator-max-microvolt = <2900000>;
25 regulator-type = "voltage";
26 regulator-always-on;
29 gpios-states = <0>;
[all …]
/openbmc/linux/arch/powerpc/boot/dts/
H A Dasp834x-redboot.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
8 /dts-v1/;
12 compatible = "analogue-and-micro,asp8347e";
13 #address-cells = <1>;
14 #size-cells = <1>;
24 #address-cells = <1>;
25 #size-cells = <0>;
30 d-cache-line-size = <32>;
31 i-cache-line-size = <32>;
32 d-cache-size = <32768>;
[all …]
H A Dmpc5125twr.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
7 * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
11 #include <dt-bindings/clock/mpc512x-clock.h>
13 /dts-v1/;
18 #address-cells = <1>;
19 #size-cells = <1>;
20 interrupt-parent = <&ipic>;
29 #address-cells = <1>;
30 #size-cells = <0>;
35 d-cache-line-size = <0x20>; // 32 bytes
[all …]
/openbmc/linux/arch/arm64/boot/dts/marvell/
H A Darmada-3720-db.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 * (DB-88F3720-DDR3)
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
14 /dts-v1/;
16 #include <dt-bindings/gpio/gpio.h>
17 #include "armada-372x.dtsi"
20 model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
21 compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700";
24 stdout-path = "serial0:115200n8";
32 exp_usb3_vbus: usb3-vbus {
[all …]
/openbmc/u-boot/arch/arm/dts/
H A Darmada-3720-turris-mox.dts1 // SPDX-License-Identifier: GPL-2.0+ or X11
6 * Based on armada-3720-espressobin.dts by:
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
11 /dts-v1/;
13 #include <dt-bindings/gpio/gpio.h>
14 #include "armada-372x.dtsi"
18 compatible = "cznic,turris-mox", "marvell,armada3720",
22 stdout-path = "serial0:115200n8";
38 compatible = "regulator-fixed";
39 regulator-name = "usb3-vbus";
[all …]
H A Darmada-3720-espressobin.dts6 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * This file is dual-licensed: you can use it either under the terms
48 /dts-v1/;
50 #include "armada-372x.dtsi"
54 compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
57 stdout-path = "serial0:115200n8";
73 max-lanes = <3>;
74 phy0 {
75 phy-type = <PHY_TYPE_PEX0>;
76 phy-speed = <PHY_SPEED_2_5G>;
[all …]
H A Darmada-3720-db.dts3 * (DB-88F3720-DDR3)
6 * Gregory CLEMENT <gregory.clement@free-electrons.com>
8 * This file is dual-licensed: you can use it either under the terms
47 /dts-v1/;
49 #include "armada-372x.dtsi"
52 model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
53 compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
56 stdout-path = "serial0:115200n8";
72 phy0 {
73 phy-type = <PHY_TYPE_PEX0>;
[all …]
H A Ddm816x.dtsi7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/pinctrl/omap.h>
12 interrupt-parent = <&intc>;
13 #address-cells = <1>;
14 #size-cells = <1>;
28 #address-cells = <1>;
29 #size-cells = <0>;
31 compatible = "arm,cortex-a8";
38 compatible = "arm,cortex-a8-pmu";
47 compatible = "ti,omap-infra";
[all …]
/openbmc/linux/arch/arm/boot/dts/microchip/
H A Dat91-sama5d4_ma5d4evk.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include "at91-sama5d4_ma5d4.dtsi"
14 stdout-path = "serial3:115200n8";
19 atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
20 pinctrl-names = "default";
21 pinctrl-0 = <&pinctrl_usba_vbus>;
26 num-ports = <3>;
27 atmel,vbus-gpio = <0
34 usb2: ehci@600000 { label
[all …]
/openbmc/linux/drivers/phy/allwinner/
H A Dphy-sun4i-usb.c1 // SPDX-License-Identifier: GPL-2.0-or-later
5 * Copyright (C) 2014-2015 Hans de Goede <hdegoede@redhat.com>
18 #include <linux/extcon-provider.h>
28 #include <linux/phy/phy-sun4i-usb.h>
80 /* A83T specific control bits for PHY0 */
129 /* phy0 / otg related variables */
146 container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index])
154 iscr = readl(data->base + REG_ISCR); in sun4i_usb_phy0_update_iscr()
157 writel(iscr, data->base + REG_ISCR); in sun4i_usb_phy0_update_iscr()
184 u32 temp, usbc_bit = BIT(phy->index * 2); in sun4i_usb_phy_write()
[all …]
/openbmc/linux/arch/arm64/boot/dts/ti/
H A Dk3-j721s2-som-p0.dtsi1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
8 /dts-v1/;
10 #include "k3-j721s2.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
22 reserved_memory: reserved-memory {
23 #address-cells = <2>;
24 #size-cells = <2>;
30 no-map;
34 mux0: mux-controller {
[all …]

123