arm/dts/armada-3720-db.dts

3  * (DB-88F3720-DDR3)
6  * Gregory CLEMENT <gregory.clement@free-electrons.com>
8  * This file is dual-licensed: you can use it either under the terms
47 /dts-v1/;
49 #include "armada-372x.dtsi"
52 	model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
53 	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
56 		stdout-path = "serial0:115200n8";
72 	phy0 {
73 		phy-type = <PHY_TYPE_PEX0>;
74 		phy-speed = <PHY_SPEED_2_5G>;
78 		phy-type = <PHY_TYPE_USB3_HOST0>;
79 		phy-speed = <PHY_SPEED_5G>;
84 	pinctrl-names = "default";
85 	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
87 	phy-mode = "rgmii";
91 	pinctrl-names = "default";
92 	pinctrl-0 = <&i2c1_pins>;
102 	bus-width = <4>;
103 	pinctrl-names = "default";
104 	pinctrl-0 = <&sdio_pins>;
109 	non-removable;
110 	bus-width = <8>;
111 	mmc-ddr-1_8v;
112 	mmc-hs400-1_8v;
113 	marvell,pad-type = "fixed-1-8v";
114 	pinctrl-names = "default";
115 	pinctrl-0 = <&mmc_pins>;
118 	#address-cells = <1>;
119 	#size-cells = <0>;
121 		compatible = "mmc-card";
128 	pinctrl-names = "default";
129 	pinctrl-0 = <&spi_quad_pins>;
131 	spi-flash@0 {
132 		#address-cells = <1>;
133 		#size-cells = <1>;
134 		compatible = "st,m25p128", "spi-flash";
136 		spi-max-frequency = <50000000>;
137 		m25p,fast-read;
143 	pinctrl-names = "default";
144 	pinctrl-0 = <&uart1_pins>;
149 &usb2 {
160 	pinctrl-names = "default";
161 	pinctrl-0 = <&pcie_pins>;
162 	reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;