| /openbmc/linux/drivers/usb/roles/ |
| H A D | class.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * USB Role Switch Support
10 #include <linux/usb/role.h>
25 enum usb_role role; member
40 * usb_role_switch_set_role - Set USB role for a switch
41 * @sw: USB role switch
42 * @role: USB role to be switched to
44 * Set USB role @role for @sw.
46 int usb_role_switch_set_role(struct usb_role_switch *sw, enum usb_role role) in usb_role_switch_set_role() argument
53 if (!sw->registered) in usb_role_switch_set_role()
[all …]
|
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
4 tristate "USB Role Switch Support"
6 USB Role Switch is a device that can select the USB role - host or
7 device - for a USB port (connector). In most cases dual-role capable
8 USB controller will also represent the switch, but on some platforms
9 multiplexer/demultiplexer switch is used to route the data lines on
10 the USB connector between separate USB host and device controllers.
12 Say Y here if your USB connectors support both device and host roles.
19 tristate "Intel XHCI USB Role Switch"
22 Driver for the internal USB role switch for switching the USB data
[all …]
|
| H A D | intel-xhci-usb-role-switch.c | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Intel XHCI (Cherry Trail, Broxton and others) USB OTG role switch driver
5 * Copyright (c) 2016-2017 Hans de Goede <hdegoede@redhat.com>
23 #include <linux/usb/role.h>
52 "intel-xhci-usb-sw",
56 enum usb_role role) in intel_xhci_usb_set_role() argument
71 dev_err(data->dev, "Error could not acquire lock\n"); in intel_xhci_usb_set_role()
72 return -EIO; in intel_xhci_usb_set_role()
75 pm_runtime_get_sync(data->dev); in intel_xhci_usb_set_role()
80 * SW_SWITCH_EN bits to be zero for role switch, in intel_xhci_usb_set_role()
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/usb/ |
| H A D | mediatek,mtu3.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Chunfeng Yun <chunfeng.yun@mediatek.com>
14 - $ref: usb-drd.yaml
23 - enum:
24 - mediatek,mt2712-mtu3
25 - mediatek,mt8173-mtu3
26 - mediatek,mt8183-mtu3
[all …]
|
| H A D | mediatek,musb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/usb/mediatek,musb.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Min Guo <min.guo@mediatek.com>
15 pattern: '^usb@[0-9a-f]+$'
19 - enum:
20 - mediatek,mt8516-musb
21 - mediatek,mt2701-musb
22 - mediatek,mt7623-musb
[all …]
|
| H A D | usb-drd.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/usb/usb-drd.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Generic USB OTG Controller
10 - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13 otg-rev:
15 Tells usb driver the release number of the OTG and EH supplement with
16 which the device and its descriptors are compliant, in binary-coded
18 features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be
[all …]
|
| H A D | dwc2.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/usb/dwc2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: DesignWare HS OTG USB 2.0 controller
10 - Rob Herring <robh@kernel.org>
13 - $ref: usb-drd.yaml#
14 - $ref: usb-hcd.yaml#
19 - const: brcm,bcm2835-usb
20 - const: hisilicon,hi6220-usb
[all …]
|
| H A D | renesas,usb3-peri.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/usb/renesas,usb3-peri.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Renesas USB 3.0 Peripheral controller
10 - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
15 - items:
16 - enum:
17 - renesas,r8a774a1-usb3-peri # RZ/G2M
18 - renesas,r8a774b1-usb3-peri # RZ/G2N
[all …]
|
| H A D | mediatek,mt6360-tcpc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller
10 - ChiYuan Huang <cy_huang@richtek.com>
13 Mediatek MT6360 is a multi-functional device. It integrates charger, ADC, flash, RGB indicators,
14 regulators (BUCKs/LDOs), and TypeC Port Switch with Power Delivery controller.
15 This document only describes MT6360 Type-C Port Switch and Power Delivery controller.
20 - mediatek,mt6360-tcpc
[all …]
|
| H A D | richtek,rt1711h.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
10 - Gene Chen <gene_chen@richtek.com>
13 The RT1711H is a USB Type-C controller that complies with the latest
14 USB Type-C and PD standards. It does the USB Type-C detection including attach
15 and orientation. It integrates the physical layer of the USB BMC power
17 support for alternative interfaces of the Type-C specification.
[all …]
|
| H A D | qcom,pmic-typec.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm PMIC based USB Type-C block
10 - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
13 Qualcomm PMIC Type-C block
18 - qcom,pm8150b-typec
22 $ref: /schemas/connector/usb-connector.yaml#
26 description: Type-C port and pdphy SPMI register base offsets
[all …]
|
| /openbmc/linux/Documentation/ABI/testing/ |
| H A D | sysfs-class-usb_role | 5 Place in sysfs for USB Role Switches. USB Role Switch is a
6 device that can select the data role (host or device) for USB
9 What: /sys/class/usb_role/<switch>/role
13 The current role of the switch. This attribute can be used for
14 requesting role swapping with non-USB Type-C ports. With USB
15 Type-C ports, the ABI defined for USB Type-C connector class
19 - none
20 - host
21 - device
|
| /openbmc/linux/include/linux/usb/ |
| H A D | role.h | 1 // SPDX-License-Identifier: GPL-2.0
17 enum usb_role role);
21 * struct usb_role_switch_desc - USB Role Switch Descriptor
22 * @fwnode: The device node to be associated with the role switch
26 * @set: Callback for setting the role
27 * @get: Callback for getting the role (optional)
28 * @allow_userspace_control: If true userspace may change the role through sysfs
30 * @name: Name for the switch (optional)
32 * @usb2_port and @usb3_port will point to the USB host port and @udc to the USB
33 * device controller behind the USB connector with the role switch. If
[all …]
|
| /openbmc/linux/drivers/usb/cdns3/ |
| H A D | Kconfig | 2 tristate "Cadence USB Support"
3 depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA
8 dual-role controller.
9 It supports: dual-role switch, Host-only, and Peripheral-only.
17 tristate "Cadence USB3 Dual-Role Controller"
20 Say Y here if your system has a Cadence USB3 dual-role controller.
21 It supports: dual-role switch, Host-only, and Peripheral-only.
34 Cadence USBSS-DEV driver.
41 depends on USB=y || USB=USB_CDNS3
51 tristate "Cadence USB3 support on PCIe-based platforms"
[all …]
|
| H A D | core.c | 1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2018-2019 Cadence.
6 * Copyright (C) 2017-2018 NXP
14 #include <linux/dma-mapping.h>
24 #include "host-export.h"
29 static int cdns_role_start(struct cdns *cdns, enum usb_role role) in cdns_role_start() argument
33 if (WARN_ON(role > USB_ROLE_DEVICE)) in cdns_role_start()
36 mutex_lock(&cdns->mutex); in cdns_role_start()
37 cdns->role = role; in cdns_role_start()
38 mutex_unlock(&cdns->mutex); in cdns_role_start()
[all …]
|
| /openbmc/linux/drivers/misc/ |
| H A D | hisi_hikey_usb.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * Support for usb functionality of Hikey series boards
6 * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
22 #include <linux/usb/role.h>
44 enum usb_role role; member
56 if (!hisi_hikey_usb->regulator) in hub_power_ctrl()
59 status = regulator_is_enabled(hisi_hikey_usb->regulator); in hub_power_ctrl()
64 ret = regulator_enable(hisi_hikey_usb->regulator); in hub_power_ctrl()
66 ret = regulator_disable(hisi_hikey_usb->regulator); in hub_power_ctrl()
69 dev_err(hisi_hikey_usb->dev, in hub_power_ctrl()
[all …]
|
| /openbmc/linux/Documentation/usb/ |
| H A D | chipidea.rst | 2 ChipIdea Highspeed Dual Role Controller Driver
6 -----------------------------------
12 -------------------------
29 otg-rev = <0x0200>;
30 adp-disable;
33 -------------------
38 2) Connect 2 boards with usb cable: one end is micro A plug, the other end
41 The A-device (with micro A plug inserted) should enumerate B-device.
43 3) Role switch
45 On B-device::
[all …]
|
| /openbmc/linux/drivers/extcon/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
11 host USB ports. Many of 30-pin connectors including PDMI are
25 tristate "X-Power AXP288 EXTCON support"
29 Say Y here to enable support for USB peripheral detection
30 and USB MUX switching by X-Power AXP288 PMIC.
39 FSA9480 microUSB switch and accessory detector chip. The FSA9480 is a USB
40 port accessory detector and switch. The FSA9480 is fully controlled using
41 I2C and enables USB data, stereo and mono audio, video, microphone
55 Say Y here to enable extcon support for USB OTG ports controlled by
85 Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory
[all …]
|
| /openbmc/linux/drivers/usb/mtu3/ |
| H A D | mtu3.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
3 * mtu3.h - MediaTek USB3 DRD header
22 #include <linux/usb.h>
23 #include <linux/usb/ch9.h>
24 #include <linux/usb/gadget.h>
25 #include <linux/usb/otg.h>
26 #include <linux/usb/role.h>
35 #define MU3D_EP_TXCR0(epnum) (U3D_TX1CSR0 + (((epnum) - 1) * 0x10))
36 #define MU3D_EP_TXCR1(epnum) (U3D_TX1CSR1 + (((epnum) - 1) * 0x10))
37 #define MU3D_EP_TXCR2(epnum) (U3D_TX1CSR2 + (((epnum) - 1) * 0x10))
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/phy/ |
| H A D | nvidia,tegra194-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra194-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| H A D | nvidia,tegra186-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra186-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| H A D | nvidia,tegra210-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| /openbmc/linux/drivers/usb/phy/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
3 # Physical Layer USB driver configuration
5 menu "USB Physical Layer drivers"
12 # USB Transceiver Drivers
15 tristate "AB8500 USB Transceiver Driver"
19 Enable this to support the USB OTG transceiver in AB8500 chip.
24 tristate "Freescale USB OTG Transceiver Driver"
29 Enable this to support Freescale USB OTG transceiver.
32 tristate "Keystone USB PHY Driver"
36 Enable this to support Keystone USB phy. This driver provides
[all …]
|
| /openbmc/linux/Documentation/driver-api/usb/ |
| H A D | typec.rst | 3 USB Type-C connector class
7 ------------
9 The typec class is meant for describing the USB Type-C ports in a system to the
14 The platforms are expected to register every USB Type-C port they have with the
15 class. In a normal case the registration will be done by a USB Type-C or PD PHY
17 USB PD controller or even driver for Thunderbolt3 controller. This document
18 considers the component registering the USB Type-C ports with the class as "port
26 attributes are described in Documentation/ABI/testing/sysfs-class-typec.
29 --------------------
36 "port0-partner". Full path to the device would be
[all …]
|
| /openbmc/linux/drivers/usb/dwc2/ |
| H A D | drd.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * drd.c - DesignWare USB2 DRD Controller Dual-role support
13 #include <linux/usb/role.h>
25 spin_lock_irqsave(&hsotg->lock, flags); in dwc2_ovr_init()
30 if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST) in dwc2_ovr_init()
32 else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL) in dwc2_ovr_init()
36 spin_unlock_irqrestore(&hsotg->lock, flags); in dwc2_ovr_init()
38 dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST) || in dwc2_ovr_init()
39 (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)); in dwc2_ovr_init()
46 /* Check if A-Session is already in the right state */ in dwc2_ovr_avalid()
[all …]
|