Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13 |
|
#
82f5332d |
| 21-Feb-2023 |
Ziyang Huang <hzyitc@outlook.com> |
usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
Some boards might use USB-A female connector for USB ports, however, the port could be connected to a dual-mode USB controlle
usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
Some boards might use USB-A female connector for USB ports, however, the port could be connected to a dual-mode USB controller, making it also behaves as a peripheral device if male-to-male cable is connected.
In this case, the dts looks like this:
&usb0 { status = "okay"; dr_mode = "otg"; usb-role-switch; role-switch-default-mode = "host"; };
After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call dwc2_force_mode() with parameter host=false, which causes inconsistent mode - The hardware is in peripheral mode while the kernel status is in host mode.
What we can do now is to call dwc2_drd_role_sw_set() to switch to device mode, and everything should work just fine now, even switching back to none(default) mode afterwards.
Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support") Cc: stable <stable@kernel.org> Signed-off-by: Ziyang Huang <hzyitc@outlook.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/SG2PR01MB204837BF68EDB0E343D2A375C9A59@SG2PR01MB2048.apcprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24 |
|
#
32fde843 |
| 16-Feb-2022 |
Fabrice Gasnier <fabrice.gasnier@foss.st.com> |
usb: dwc2: drd: fix soft connect when gadget is unconfigured
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so
usb: dwc2: drd: fix soft connect when gadget is unconfigured
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable <stable@vger.kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
736e8d89 |
| 12-Feb-2022 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"
This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87.
It causes build errors as reported by the kernel test robot.
Lin
Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"
This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87.
It causes build errors as reported by the kernel test robot.
Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured") Cc: stable@kernel.org Cc: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.23 |
|
#
269cbcf7 |
| 09-Feb-2022 |
Fabrice Gasnier <fabrice.gasnier@foss.st.com> |
usb: dwc2: drd: fix soft connect when gadget is unconfigured
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so
usb: dwc2: drd: fix soft connect when gadget is unconfigured
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable@kernel.org Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7 |
|
#
3ad02e0e |
| 06-Dec-2021 |
Fabrice Gasnier <fabrice.gasnier@foss.st.com> |
usb: dwc2: drd: restore role and overrides upon resume
Override enable bits may not be restored when going to low power mode (e.g. when in DWC2_POWER_DOWN_PARAM_NONE). These bits are set when probin
usb: dwc2: drd: restore role and overrides upon resume
Override enable bits may not be restored when going to low power mode (e.g. when in DWC2_POWER_DOWN_PARAM_NONE). These bits are set when probing/initializing drd (role switch). Restore them upon resume from low power mode (in case these have been lost).
To achieve this, the last known role is restored upon resume. And the override enable bits are always set when configuring aval, bval and vbval.
When resuming, forcing the role should be done only once, or this can cause port changes in HOST mode for instance. So, only restore FORCEDEVMODE/FORCEHOSTMODE when role_sw is unused
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1638806203-6624-4-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
e14acb87 |
| 06-Dec-2021 |
Fabrice Gasnier <fabrice.gasnier@foss.st.com> |
usb: dwc2: drd: add role-switch-default-node support
When using usb-role-switch, while the usb role is not yet define (USB_ROLE_NONE), the user may want to configure the default mode to host or devi
usb: dwc2: drd: add role-switch-default-node support
When using usb-role-switch, while the usb role is not yet define (USB_ROLE_NONE), the user may want to configure the default mode to host or device. Use role-switch-default-mode for that purpose.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1638806203-6624-3-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10 |
|
#
1ad707f5 |
| 05-Oct-2021 |
Amelie Delaunay <amelie.delaunay@foss.st.com> |
usb: dwc2: drd: reset current session before setting the new one
If role is changed without the "none" step, A- and B- valid session could be set at the same time. It is an issue. This patch resets
usb: dwc2: drd: reset current session before setting the new one
If role is changed without the "none" step, A- and B- valid session could be set at the same time. It is an issue. This patch resets A-session if role switch sets B-session, and resets B-session if role switch sets A-session. Then, it is possible to change the role without the "none" step.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211005095305.66397-4-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
8d387f61 |
| 05-Oct-2021 |
Amelie Delaunay <amelie.delaunay@foss.st.com> |
usb: dwc2: drd: fix dwc2_drd_role_sw_set when clock could be disabled
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of the probe (it is not the case if USB_DR_MODE_HOST or
usb: dwc2: drd: fix dwc2_drd_role_sw_set when clock could be disabled
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG). The clock is then enabled on udc_start. If dwc2_drd_role_sw_set is called before udc_start (it is the case if the usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be read/written, so session cannot be overridden. To avoid this case, check the ll_hw_enabled value and enable the clock if it is available, and disable it after the override.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211005095305.66397-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
b2cab2a2 |
| 05-Oct-2021 |
Amelie Delaunay <amelie.delaunay@foss.st.com> |
usb: dwc2: drd: fix dwc2_force_mode call in dwc2_ovr_init
Instead of forcing the role to Device, check the dr_mode configuration. If the core is Host only, force the mode to Host, this to avoid the
usb: dwc2: drd: fix dwc2_force_mode call in dwc2_ovr_init
Instead of forcing the role to Device, check the dr_mode configuration. If the core is Host only, force the mode to Host, this to avoid the dwc2_force_mode warning: WARNING: CPU: 1 PID: 21 at drivers/usb/dwc2/core.c:615 dwc2_drd_init+0x104/0x17c
When forcing mode to Host, dwc2_force_mode may sleep the time the host role is applied. To avoid sleeping while atomic context, move the call to dwc2_force_mode after spin_unlock_irqrestore. It is safe, as interrupts are not yet unmasked here.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211005095305.66397-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
943a914d |
| 16-Feb-2022 |
Fabrice Gasnier <fabrice.gasnier@foss.st.com> |
usb: dwc2: drd: fix soft connect when gadget is unconfigured
commit 32fde84362c40961726a5c91f35ad37355ccc0c6 upstream.
When the gadget driver hasn't been (yet) configured, and the cable is connecte
usb: dwc2: drd: fix soft connect when gadget is unconfigured
commit 32fde84362c40961726a5c91f35ad37355ccc0c6 upstream.
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable <stable@vger.kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
f4e72ad0 |
| 12-Feb-2022 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"
commit 736e8d89044c1c330967fb938fa766cd9e0d8af0 upstream.
This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87.
It cau
Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"
commit 736e8d89044c1c330967fb938fa766cd9e0d8af0 upstream.
This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87.
It causes build errors as reported by the kernel test robot.
Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured") Cc: stable@kernel.org Cc: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
a6ef1bda |
| 09-Feb-2022 |
Fabrice Gasnier <fabrice.gasnier@foss.st.com> |
usb: dwc2: drd: fix soft connect when gadget is unconfigured
commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87 upstream.
When the gadget driver hasn't been (yet) configured, and the cable is connecte
usb: dwc2: drd: fix soft connect when gadget is unconfigured
commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87 upstream.
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable@kernel.org Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
b35b82e6 |
| 05-Oct-2021 |
Amelie Delaunay <amelie.delaunay@foss.st.com> |
usb: dwc2: drd: reset current session before setting the new one
[ Upstream commit 1ad707f559f7cb12c64f3d7cb37f0b1ea27c1058 ]
If role is changed without the "none" step, A- and B- valid session cou
usb: dwc2: drd: reset current session before setting the new one
[ Upstream commit 1ad707f559f7cb12c64f3d7cb37f0b1ea27c1058 ]
If role is changed without the "none" step, A- and B- valid session could be set at the same time. It is an issue. This patch resets A-session if role switch sets B-session, and resets B-session if role switch sets A-session. Then, it is possible to change the role without the "none" step.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211005095305.66397-4-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
#
27903e1f |
| 05-Oct-2021 |
Amelie Delaunay <amelie.delaunay@foss.st.com> |
usb: dwc2: drd: fix dwc2_drd_role_sw_set when clock could be disabled
[ Upstream commit 8d387f61b0240854e81450c261beb775065bad5d ]
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at th
usb: dwc2: drd: fix dwc2_drd_role_sw_set when clock could be disabled
[ Upstream commit 8d387f61b0240854e81450c261beb775065bad5d ]
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG). The clock is then enabled on udc_start. If dwc2_drd_role_sw_set is called before udc_start (it is the case if the usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be read/written, so session cannot be overridden. To avoid this case, check the ll_hw_enabled value and enable the clock if it is available, and disable it after the override.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211005095305.66397-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
#
bd18f99c |
| 05-Oct-2021 |
Amelie Delaunay <amelie.delaunay@foss.st.com> |
usb: dwc2: drd: fix dwc2_force_mode call in dwc2_ovr_init
[ Upstream commit b2cab2a24fb5d13ce1d384ecfb6de827fa08a048 ]
Instead of forcing the role to Device, check the dr_mode configuration. If the
usb: dwc2: drd: fix dwc2_force_mode call in dwc2_ovr_init
[ Upstream commit b2cab2a24fb5d13ce1d384ecfb6de827fa08a048 ]
Instead of forcing the role to Device, check the dr_mode configuration. If the core is Host only, force the mode to Host, this to avoid the dwc2_force_mode warning: WARNING: CPU: 1 PID: 21 at drivers/usb/dwc2/core.c:615 dwc2_drd_init+0x104/0x17c
When forcing mode to Host, dwc2_force_mode may sleep the time the host role is applied. To avoid sleeping while atomic context, move the call to dwc2_force_mode after spin_unlock_irqrestore. It is safe, as interrupts are not yet unmasked here.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211005095305.66397-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8 |
|
#
17f93402 |
| 09-Sep-2020 |
Amelie Delaunay <amelie.delaunay@st.com> |
usb: dwc2: override PHY input signals with usb role switch support
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals.
id
usb: dwc2: override PHY input signals with usb role switch support
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals.
iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0.
avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL
It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid
Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
show more ...
|
Revision tags: v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47 |
|
#
bc0f0d4a |
| 16-Jun-2020 |
Amelie Delaunay <amelie.delaunay@st.com> |
usb: dwc2: override PHY input signals with usb role switch support
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals.
id
usb: dwc2: override PHY input signals with usb role switch support
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals.
iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0.
avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL
It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid
Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
show more ...
|
Revision tags: v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8 |
|
#
17f93402 |
| 09-Sep-2020 |
Amelie Delaunay <amelie.delaunay@st.com> |
usb: dwc2: override PHY input signals with usb role switch support This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input
usb: dwc2: override PHY input signals with usb role switch support This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0. avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
show more ...
|