| /openbmc/linux/Documentation/devicetree/bindings/connector/ |
| H A D | usb-connector.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/connector/usb-connector.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: USB Connector
10 - Rob Herring <robh@kernel.org>
13 A USB connector node represents a physical USB connector. It should be a child
14 of a USB interface controller or a separate node when it is attached to both
15 MUX and USB interface controller.
20 - enum:
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/phy/ |
| H A D | nvidia,tegra186-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra186-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| H A D | nvidia,tegra194-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra194-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| H A D | nvidia,tegra210-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| H A D | nvidia,tegra124-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra124-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/usb/ |
| H A D | mediatek,musb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/usb/mediatek,musb.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Min Guo <min.guo@mediatek.com>
15 pattern: '^usb@[0-9a-f]+$'
19 - enum:
20 - mediatek,mt8516-musb
21 - mediatek,mt2701-musb
22 - mediatek,mt7623-musb
[all …]
|
| H A D | richtek,rt1711h.txt | 4 - compatible : Must be "richtek,rt1711h".
5 - reg : Must be 0x4e, it's slave address of RT1711H.
6 - interrupts : <a b> where a is the interrupt number and b represents an
9 Required sub-node:
10 - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
11 of connector node are specified in
12 Documentation/devicetree/bindings/connector/usb-connector.yaml
18 interrupt-parent = <&gpio26>;
21 usb_con: connector {
22 compatible = "usb-c-connector";
[all …]
|
| H A D | mediatek,mtu3.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Chunfeng Yun <chunfeng.yun@mediatek.com>
14 - $ref: usb-drd.yaml
23 - enum:
24 - mediatek,mt2712-mtu3
25 - mediatek,mt8173-mtu3
26 - mediatek,mt8183-mtu3
[all …]
|
| H A D | usb-drd.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/usb/usb-drd.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Generic USB OTG Controller
10 - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
13 otg-rev:
15 Tells usb driver the release number of the OTG and EH supplement with
16 which the device and its descriptors are compliant, in binary-coded
18 features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be
[all …]
|
| /openbmc/linux/Documentation/ABI/testing/ |
| H A D | sysfs-driver-typec-displayport | 5 Shows the current DisplayPort configuration for the connector.
6 Valid values are USB, source and sink. Source means DisplayPort
14 USB [source] sink
18 Note. USB configuration does not equal to Exit Mode. It is
20 USB Type-C Standard. Functionally it equals to the situation
22 Documentation/ABI/testing/sysfs-bus-typec, and use file
29 VESA DisplayPort Alt Mode on USB Type-C Standard defines six
30 different pin assignments for USB Type-C connector that are
31 labeled A, B, C, D, E, and F. The supported pin assignments are
42 connector is actually configured.
[all …]
|
| /openbmc/u-boot/board/freescale/ls1088a/ |
| H A D | README | 2 --------
3 The LS1088A Reference Design (RDB) is a high-performance computing,
9 --------------------------------------
10 Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
13 -------------------------------------------
41 -------------------------
42 - SERDES Connections, 16 lanes supporting:
43 - PCI Express - 3.0
44 - SATA 3.0
45 - XFI
[all …]
|
| /openbmc/linux/drivers/usb/typec/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
4 tristate "USB Type-C Support"
6 USB Type-C Specification defines a cable and connector for USB where
8 be Type-A plug on one end of the cable and Type-B plug on the other.
9 Determination of the host-to-device relationship happens through a
10 specific Configuration Channel (CC) which goes through the USB Type-C
12 Accessory Modes - Analog Audio and Debug - and if USB Power Delivery
13 is supported, the Alternate Modes, where the connector is used for
14 something else then USB communication.
16 USB Power Delivery Specification defines a protocol that can be used
[all …]
|
| /openbmc/linux/include/dt-bindings/usb/ |
| H A D | pd.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
21 #define PDO_FIXED_SUSPEND (1 << 28) /* USB Suspend supported (Source) */
24 #define PDO_FIXED_USB_COMM (1 << 26) /* USB communications capable */
64 #define PDO_APDO_TYPE_SHIFT 28 /* Only valid value currently is 0x0 - PPS */
89 * Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0,
99 * --------------------
100 * <31> :: data capable as a USB host
101 * <30> :: data capable as a USB device
103 * <26> :: modal operation supported (1b == yes)
105 * <22:21> :: connector type (SVDM version 2.0+ only; set to zero in version 1.0)
[all …]
|
| /openbmc/linux/include/linux/usb/ |
| H A D | pd_vdo.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * Copyright 2015-2017 Google, Inc
21 * ----------
23 * <15> :: VDM type ( 1b == structured, 0b == unstructured )
26 * <10:8> :: object position (1-7 valid ... used for enter/exit mode only)
85 * SVDM Identity request -> response
106 * --------------------
107 * <31> :: data capable as a USB host
108 * <30> :: data capable as a USB device
110 * <26> :: modal operation supported (1b == yes)
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | maxim,max77693.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Chanwoo Choi <cw00.choi@samsung.com>
11 - Krzysztof Kozlowski <krzk@kernel.org>
37 max77693-muic:
44 const: maxim,max77693-muic
47 - compatible
55 const: maxim,max77693-muic
57 connector:
[all …]
|
| H A D | maxim,max77843.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Krzysztof Kozlowski <krzk@kernel.org>
17 includes voltage current regulators, charger, fuel-gauge, haptic motor driver
33 motor-driver:
38 const: maxim,max77843-haptic
40 haptic-supply:
47 - compatible
48 - haptic-supply
[all …]
|
| H A D | richtek,rt5033.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jakob Hauser <jahau@rocketmail.com>
30 The regulators of RT5033 have to be instantiated under a sub-node named
44 $ref: /schemas/power/supply/richtek,rt5033-charger.yaml#
47 - compatible
48 - reg
49 - interrupts
54 - |
[all …]
|
| /openbmc/linux/include/linux/platform_data/ |
| H A D | usb-omap1.h | 2 * Platform data for OMAP1 USB
15 * - "A" connector (rectagular)
17 * - "B" connector (squarish) or "Mini-B"
19 * - "Mini-AB" connector (very similar to Mini-B)
24 u8 otg; /* port number, 1-based: usb1 == 2 */
35 * 2 == usb0-only, using internal transceiver
|
| /openbmc/u-boot/board/freescale/ls1012ardb/ |
| H A D | README | 2 --------
3 QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
6 optimized to support the high-bandwidth DDR3L memory and
7 a full complement of high-speed SerDes ports.
10 --------------------
11 Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
15 -----------------------
16 - SERDES Connections, 4 lanes supporting:
17 - PCI Express - 3.0
18 - SGMII, SGMII 2.5
[all …]
|
| /openbmc/u-boot/board/freescale/ls1043aqds/ |
| H A D | README | 2 --------
3 The LS1043A Development System (QDS) is a high-performance computing,
10 --------------------
11 Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A
15 -----------------------
16 - SERDES Connections, 4 lanes supporting:
17 - PCI Express - 3.0
18 - SGMII, SGMII 2.5
19 - QSGMII
20 - SATA 3.0
[all …]
|
| /openbmc/u-boot/board/freescale/ls1046aqds/ |
| H A D | README | 2 --------
3 The LS1046A Development System (QDS) is a high-performance computing,
10 --------------------
11 Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
15 -----------------------
16 - SERDES Connections, 8 lanes supporting:
17 - PCI Express - 3.0
18 - SGMII, SGMII 2.5
19 - QSGMII
20 - SATA 3.0
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mp-venice-gw71xx.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/leds/common.h>
8 #include <dt-bindings/phy/phy-imx8-pcie.h>
11 led-controller {
12 compatible = "gpio-leds";
13 pinctrl-names = "default";
14 pinctrl-0 = <&pinctrl_gpio_leds>;
16 led-0 {
20 default-state = "on";
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/mediatek/ |
| H A D | mt2701-evb.dts | 1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
14 compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
22 compatible = "mediatek,mt2701-cs42448-machine";
25 audio-routing =
42 mediatek,audio-codec = <&cs42448>;
43 mediatek,audio-codec-bt-mrg = <&bt_sco_codec>;
44 pinctrl-names = "default";
45 pinctrl-0 = <&aud_pins_default>;
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/gemini/ |
| H A D | gemini-dlink-dns-313.dts | 1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
6 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/thermal/thermal.h>
13 model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
14 compatible = "dlink,dns-313", "cortina,gemini";
15 #address-cells = <1>;
16 #size-cells = <1>;
19 /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/aspeed/ |
| H A D | aspeed-bmc-facebook-bletchley.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 /dts-v1/;
5 #include "aspeed-g6.dtsi"
6 #include <dt-bindings/gpio/aspeed-gpio.h>
7 #include <dt-bindings/usb/pd.h>
8 #include <dt-bindings/leds/leds-pca955x.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/i2c/i2c.h>
14 compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
29 iio-hwmon {
[all …]
|