Lines Matching +full:usb +full:- +full:b +full:- +full:connector

2 --------
3 The LS1088A Reference Design (RDB) is a high-performance computing,
9 --------------------------------------
10 Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
13 -------------------------------------------
41  -------------------------
42  - SERDES Connections, 16 lanes supporting:
43       - PCI Express - 3.0
44       - SATA 3.0
45       - XFI
46       - QSGMII
47  - DDR Controller
48      - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four
49        chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
51  - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB
52  - IFC/Local Bus
53     - One 2 GB NAND flash with ECC support, not as boot source
54     - CPLD of size 2K
55  - USB 3.0
56     - Two high speed USB 3.0 ports
57     - First USB 3.0 port configured as Host with Type-A connector
58     - Second USB 3.0 port configured as OTG with micro-AB connector
59  - SDHC/eMMC
60     - SDHC slot and onboard eMMC are muxed together
61  - 4 I2C controllers
62  - Two SATA onboard connectors
63  - 2 UART
64  - JTAG support
65  - QSPI emulator support
66  - TDM riser support
69 -------------------------------------------
71 For 16b IFC-NOR
105  -------------------------
106  - SERDES Connections, 16 lanes supporting:
107       - PCI Express - 3.0
108       - SATA 3.0
109       - 2 XFI
110       - QSGMII, SGMII with help for Riser card
111       - 2 RGMII
112       - 5 slot for Riser card or PCIe NIC
113  - DDR Controller
114      - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four
115        chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
117  - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB
118  - IFC/Local Bus
119     - One 2 GB NAND flash with ECC support, not as boot source
120     - CPLD of size 2K
121  - USB 3.0
122     - Two high speed USB 3.0 ports
123     - First USB 3.0 port configured as Host with Type-A connector
124     - Second USB 3.0 port configured as OTG with micro-AB connector
125  - SDHC/eMMC
126     - SDHC/eMMC slot via adaptor
127  - 4 I2C controllers
128  - Two SATA onboard connectors
129  - 2 UART
130  - JTAG support
131  - DSPI
132  - PROMJET support
133  - QSPI emulator support
134  - TDM riser support
139  Boot firmware (U-Boot)              0x00100000